Non-Conforming Product (a) Within [*****] of Chiesi’s receipt of an order for the Product, Chiesi may reject any such order or portion thereof that (i) does not conform to the warranty under Section 8.1 above, including to the Specifications, or (ii) is based on any claimed shortage in quantity, provided that such non-conformity in (i) above is not due to any failure by Chiesi, its Affiliates, agents or representatives to ship, handle, maintain, or store the Product as required under the Specifications. Kamada shall reasonably assist Chiesi in performing any such testing by providing to Chiesi any necessary technical information to accomplish such testing by Chiesi. Chiesi shall notify Kamada in writing within such [*****] period of its rejection of any order or portion thereof of the Product delivered by Kamada, which notice of rejection must contain the reason for such rejection; provided, however, that this limitation shall not apply to hidden defects in the Product. In the case of hidden defects, Chiesi shall have [*****] days from the date it becomes aware or reasonably should have become aware of any hidden defect to reject any order of the Product in accordance with applicable terms and conditions hereof. [*****] Confidential portions of this document have been redacted and filed separately with the Securities and Exchange Commission.
(b) In the event of the rejection of the Product under this Section 8.2, or any other nonconformity or defect which the Parties mutually agree is a proper basis for rejection, and if such rejection is appropriately made by Chiesi, Kamada shall use its Best Reasonable Efforts to replace the rejected Product or make up the shortage at its expense within [*****] of the notice of such rejection or shortage, and in any case as soon as reasonably possible after receiving such notice, at no additional cost to Chiesi (including shipping and transportation costs), and Kamada shall make arrangements with Chiesi for the return or disposal of any rejected Product, such return shipping or disposal charges to be paid by Kamada.
(c) In the event of a conflict regarding whether or not the Product conforms to the warranty under Section 8.1 above, including to the Specifications at the time of delivery, and Chiesi and Kamada are unable to resolve such conflict after a good faith attempt by both Parties to resolve such matter in a period of [*****] days after the conflict arises, a sample of the Product shall be submitted by Chiesi to an independent laboratory reasonably acceptable to both Parties for testing against the Specifications or other defect and the test results obtained by such laboratory shall be final and controlling for purposes of this Agreement. If the Parties are unable to agree upon such independent laboratory in a period of [*****] days after the conflict arises, such independent laboratory shall be selected by the President of the ICC. The fees and expenses of such laboratory testing shall be borne entirely by the Party against whom such laboratory’s findings are made. In the event the independent laboratory test results indicate that the Product in question did not meet the Specifications or is otherwise defective, Kamada shall use its Best Reasonable Efforts to replace the rejected Product at no additional cost to Chiesi within [*****] days after receipt of such results if replacement Product stock is available, and in any case as soon as reasonably possible after receipt of such independent laboratory test. In the event the independent laboratory test results indicate that the rejected Product in question meets the Specifications, then Chiesi shall pay all additional shipping and transportation costs, incurred by Kamada as a result of the conflict as well as the cost of the Products to the extent that such Products have not been previously paid for by Chiesi, and shall accept and pay for the previously rejected Product in accordance with all applicable provisions hereunder.
(d) Without derogating from Section 4.2(e) and from any obligations that Kamada may have under this Agreement with respect to Third Party Claims, the foregoing shall be Chiesi’s sole and exclusive remedy with respect to non-conforming Products or shortages, and all other remedies at law or in equity shall not be available to Chiesi. [*****] Confidential portions of this document have been redacted and filed separately with the Securities and Exchange Commission.
Defective Product If Client rejects Products under Section 6.1 and the deviation is determined to have arisen from Patheon’s failure to provide the Manufacturing Services in accordance with the Specifications, cGMPs, or Applicable Laws, Patheon will credit Client’s account for Patheon’s invoice price for the defective Products. If Client previously paid for the defective Products, Patheon will promptly, at Client’s election, either: (i) refund the invoice price for the defective Products; (ii) offset the amount paid against other amounts due to Patheon hereunder; or (iii) replace the Products with conforming Products without Client being liable for payment therefor under Section 3.1, contingent upon the receipt from Client of all Active Materials and Client-Supplied Components required for the manufacture of the replacement Products. For greater certainty, Patheon’s responsibility for any loss of Active Materials in defective Product will be captured and calculated in the Active Materials Yield under Section 2.2.
ACCEPTANCE OF DEFECTIVE OR NON-CONFORMING WORK 13.3.1 The State may accept defective or nonconforming Work pursuant to Paragraph 13.2.1
Inspection and Rejection of Nonconforming Goods The Buyer has the right to inspect the Goods on or after the Delivery Date. Buyer, at its sole option, may inspect all or a sample of the Goods, and may reject all or any portion of the Goods if it determines the Goods are nonconforming or defective. If Buyer rejects any portion of the Goods, Buyer has the right, effective upon written notice to Seller, to: (a) rescind the Order in its entirety; (b) accept the Goods at a reasonably reduced price; or (c) reject the Goods and require replacement of the rejected Goods. If Buyer requires replacement of the Goods, Seller shall, at its expense, promptly replace the nonconforming Goods and pay for all related expenses, including, but not limited to, transportation charges for the return of the defective goods and the delivery of replacement Goods. If Seller fails to timely deliver replacement Goods, Buyer may replace them with goods from a third party and charge Seller the cost thereof and terminate this Order for cause pursuant to Section 19. Any inspection or other action by Buyer under this Section shall not reduce or otherwise affect Seller's obligations under the Order, and Buyer shall have the right to conduct further inspections after Seller has carried out its remedial actions.
Defective Products (a) In the event that Nycomed determines that any shipment of Product, at the time of delivery, (i) does not conform to the Product Specifications, (ii) contains misprinted or non-conforming labelling or packaging, or (iii) has been damaged in transit (collectively, "Defective Products"), then Nycomed shall give Anthra notice thereof (including a sample from such shipment) within fifteen days after receipt thereof, if such defects may be ascertained by the exercise of reasonable diligence (which shall include laboratory testing or other chemical analysis as necessary) upon receipt thereof, and otherwise within fifteen days after discovery thereof. If Anthra confirms such defect, it shall promptly so notify Nycomed. If Anthra does not confirm such defect, it shall promptly so notify Nycomed, and the parties shall submit the disputed shipment for testing to an independent testing laboratory that is mutually acceptable to the parties. The findings of the testing laboratory shall be *** CONFIDENTIAL TREATMENT REQUESTED. 18 binding on the parties. The expenses of such testing shall be borne by Anthra if the testing confirms the defect, and otherwise by Nycomed.
(b) If any shipment contains Defective Product, for any reason other than the willful or negligent acts or omissions of Nycomed or its customers or agents, Anthra shall credit Nycomed with the costs incurred by Nycomed with respect to all such Defective Product that has not been sold (or has been sold and returned), which costs shall be deemed equal to the sum of any amounts paid on account of such Defective Product pursuant to Section 3.7 and any and all transportation and storage charges incurred by Nycomed in connection with such Defective Product. In addition, at Nycomed's option, (i) Anthra shall be relieved of any obligation to deliver any Product in replacement of such Defective Product, or (ii) Anthra shall replace such Defective Product as soon as possible after Nycomed notifies Anthra of its election of option (ii) of this Section 3.4, in which case Nycomed shall pay to Anthra any unpaid amounts in respect of the replacement Product in accordance with Section 3.7 following delivery of the replacement Product.
Product Warranty Seller provides general warranties of fitness and general warranties that the goods are free from defects, for 1 year from acceptance of the goods, except as may otherwise be set forth in the Description/Proposal, or other attached warranty.
Non-Conforming Measures 1. Articles 2, 3 and 6 shall not apply to:
(a) any existing non-conforming measure that is Maintained by the following, as set out in the Schedule of each Contracting Party in Annex I:
(i) the central government of a Contracting Party; or
(ii) a prefecture of Japan or a province or a Municipality of the Republic of Mozambique;
(b) any existing non-conforming measure that is maintained by a local government other than a prefecture and a province and a municipality referred to in subparagraph (a)(ii);
(c) the continuation or prompt renewal of any nonconforming measure referred to in subparagraphs
(a) and (b); or
(d) an amendment or modification to any nonconforming measure referred to in subparagraphs
(a) and (b), provided that the amendment or modification does not decrease the conformity of the measure as it existed immediately before the amendment or modification with Articles 2, 3 and 6.
2. Articles 2, 3 and 6 shall not apply to any measure that a Contracting Party adopts or maintains with respect to sectors, sub-sectors or activities set out in its Schedule in Annex II.
3. Neither Contracting Party shall, under any measure adopted after the date of entry into force of this Agreement and covered by its Schedule in Annex II, require an investor of the other Contracting Party, by reason of its nationality, to sell or otherwise dispose of an investment that exists at the time when the measure becomes effective.
4. In cases where a Contracting Party makes an amendment or a modification to any existing non-conforming measure set out in its Schedule in Annex I or where a Contracting Party adopts any new or more restrictive measure with respect to sectors, sub-sectors, or activities set out in its Schedule in Annex II after the date of entry into force of this Agreement, the Contracting Party shall, prior to the implementation of the amendment or modification or the new or more restrictive measure, or in exceptional circumstances, as soon as possible thereafter:
(a) notify the other Contracting Party of detailed information on such amendment or modification, or such measure; and
(b) hold, upon request by the other Contracting Party, consultations in good faith with the other Contracting Party with a view to achieving mutual satisfaction.
5. Each Contracting Party shall endeavour, where appropriate, to reduce or eliminate the non-conforming measures specified in its Schedules in Annexes I and II respectively.
6. Articles 2, 3 and 6 shall not apply to any measure covered by the exceptions to, or derogations from, obligations under Articles 3 and 4 of the TRIPS Agreement, as specifically provided in Articles 3 through 5 of the TRIPS Agreement.
7. Articles 2, 3 and 6 shall not apply to any measure that a Contracting Party adopts or maintains with respect to government procurement.
Penalties for non-conformity of production 9.1. The approval granted in respect of a vehicle type pursuant to this Regulation may be withdrawn if the requirements set forth above are not met.
9.2. If a Contracting Party to the Agreement applying this Regulation withdraws an approval it has previously granted, it shall forthwith so notify the other Contracting Parties applying this Regulation, by means of a communication form conforming to the model in Annex 1 to this Regulation.
Nonconforming Work 5.6.1 Rejection, Removal and Replacement of Nonconforming Work
ACCEPTANCE OF INCOMPLETE OR NON-CONFORMING DELIVERABLES If, instead of requiring immediate correction or removal and replacement of defective or non- conforming deliverables, the City prefers to accept it, the City may do so. The Contractor shall pay all claims, costs, losses and damages attributable to the City’s evaluation of and determination to accept such defective or non-conforming deliverables. If any such acceptance occurs prior to final payment, the City may deduct such amounts as are necessary to compensate the City for the diminished value of the defective or non-conforming deliverables. If the acceptance occurs after final payment, such amount will be refunded to the City by the Contractor.
