RIGHTS TO DATA AND PRODUCTS OF ACTIVITIES Sample Clauses

RIGHTS TO DATA AND PRODUCTS OF ACTIVITIES. 6.1 Except as otherwise provided in this Agreement or as may otherwise be specifically agreed by the Parties in writing, each in its sole discretion, each Mount Sinai Party shall have the unrestricted right to use all of the Covered Data at any time for [***] purposes. Each Mount Sinai Party has the right to use the Covered Data for [***], subject to the terms of this Agreement, including but not limited to the restrictive covenants described in Section 6.2 (but subject to any exceptions set forth therein). The Mount Sinai Parties shall not use the Covered Data to perform R&D Activities that are [***] (collectively, “Commercial Projects”), except as permitted by Section 6.3. For the avoidance of doubt, the use of the Covered Data by the Mount Sinai Parties’ health care providers to [***] shall not constitute the use of the Covered Data for a Commercial Project, regardless of whether the [***], as long as a Commercial Entity does not [***]. 6.2 Each Mount Sinai Party acknowledges and agrees that during the term of this Agreement, and (provided that no Fundamental In-Term Breach and no Fundamental Post-Termination Breach occurs) for a period of [***], such Mount Sinai Party will not [***] that is [***]. Notwithstanding the foregoing, to the extent that [***] is incorporated in a [***]in the Mount Sinai Parties’ [***] in a [***], or is contained in the [***] because it was [***] after being so incorporated (the “Incorporated Covered Data”), the Mount Sinai Parties shall not be restricted from using such Incorporated Covered Data for any purposes and the restrictions set forth in Section 6.3 shall not apply. It is also understood that this Section 6.2 shall not restrict the Mount Sinai Parties from [***] in Intellectual Property developed by the Mount Sinai Parties using [***], as long as such Third Party is not [***] itself except for the sole purpose of validating [***].
Sample 1
AutoNDA by SimpleDocs

Related to RIGHTS TO DATA AND PRODUCTS OF ACTIVITIES

  • Third Party Products and Services Any third-party hardware, software and/or services that is delivered by ResMed for use either standalone or in conjunction with ResMed products and/or services, shall be subject to the third-party terms and conditions and/or license agreements between Customer and the third party. Such third-party hardware, software and/or services is provided by ResMed "AS IS," without any warranty of any kind. Any representations or warranties as to such hardware, software and/or services shall only be as granted by the applicable third parties, if any, that accompany such products and/or software and/or services. Any representations, warranties, or other similar obligations with respect to such third-party hardware, software and/or services flow directly from the third party to Customer and ResMed shall have no responsibility at all for any such representations, warranties, obligations or lack thereof.

  • Third Party Data Any statistical, industry-related and market-related data, which are included in the Disclosure Package and the Prospectus, is based on or derived from sources that the Company reasonably and in good faith believes to be reliable and accurate, and such data agrees with the sources from which it is derived, and the Company has obtained the written consent for the use of such data from such sources to the extent required.

  • Third Party Technology The Company makes use of third party technology to collect information required for traffic measurement, research, and analytics. Use of third party technology entails data collection. We therefore would like to inform clients the Company enables third parties to place or read cookies located on the browsers of users entering the Company’s domain. Said third parties may also use web beacons to collect information through advertising located on the Company’s web site. Please note that you may change your browser settings to refuse or disable Local Shared Objects and similar technologies; however, by doing so you may be disabling some of the functionality of Company’s services.

  • License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license. (b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement. (d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. (e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.

  • Claims relating to Intellectual Property Rights 29.1. The Contractor must not infringe any Intellectual Property Rights of any third party in providing the Services or otherwise performing its obligations under the Framework Agreement and must ensure that the provision of the Services and the use or possession of the Deliverables does not infringe such Intellectual Property Rights. 29.2. The Contractor must promptly notify the Authority if any claim or demand is made or action brought against the Contractor for infringement or alleged infringement of any Intellectual Property Right which may affect the use or possession of the Deliverables or which may affect the provision of the Services. 29.3. Where a claim to which this clause applies is made, the Contractor must, at its expense, use its best endeavours to: 29.3.1. modify the Services or Deliverables or substitute alternative Services or Deliverables (in any case without reducing performance or functionality) so as to avoid the infringement or alleged infringement of the Intellectual Property Rights; or 29.3.2. procure the grant of a licence or licences from the pursuer, claimant or complainer, on terms acceptable to the Authority, so as to avoid the infringement or alleged infringement of the Intellectual Property Rights of the pursuer, claimant or complainer. 29.4. The Contractor must not without the consent of the Authority make any admissions which may be prejudicial to the defence or settlement of any claim to which this clause applies.

  • Additional Products and Services Subject to the allocation of funds, the CPO may add similar equipment, supplies, services, or locations, within the scope of this Agreement, to the list of equipment, supplies, services, or locations to be performed or provided by giving written notification to Contractor. For purposes of this Section, the “Effective Date” means the date specified in the notification from the CPO. As of the Effective Date, each item added is subject to this Agreement, as if it had originally been a part, but the charge for each item starts to accrue only on the Effective Date. In the event the additional equipment, supplies, services, or locations are not identical to the items(s) already under this Agreement, the charges therefor will then be Contractor’s normal and customary charges or rates for the equipment, supplies, services, or locations classified in the Fees and Costs (Exhibit “F”).

  • Other Products and Services As our customer, you have access to a suite of financial products and services availed by ourselves, our affiliates and strategic partners designed to help you address and achieve your financial needs and goals. You agree that you can obtain information about such Products and Services via our website xxx.xxxxxxxx.xxx.xx and you further agree that we can from time to time communicate information in relation to such Products or Services to you specifically or generally to all cardmembers via such communication mode as we consider appropriate.

  • Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.

  • INTELLECTUAL PROPERTY RIGHTS - DATA RIGHTS A. Data produced under this Annex which is subject to paragraph C. of the Intellectual Property Rights - Data Rights Article of the Umbrella Agreement will be protected for the period of one year. B. Under paragraph H. of the Intellectual Property Rights - Data Rights Article of the Umbrella Agreement, Disclosing Party provides the following Data to Receiving Party. The lists below may not be comprehensive, are subject to change, and do not supersede any restrictive notice on the Data provided.

  • Licensed Intellectual Property Section 3.17(h)(vi)...................................29

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!