Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY.
(b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item.
(c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.
Technology License 4.1 Unless any event described in Article 2.2 or 2.3 of this Agreement occurs, all of the technology required to be licensed for any of Party B’s business shall be provided by Party A on an exclusive basis. Party A will try its best to license Party B to use the technology owned by Party A, or re-license Party B to use the technology as approved by the owner.
4.2 The Parties shall negotiate with each other to enter into specific technology license contracts to expressly specify the detail matters such as the technology to be licensed, the method to license the technology, license fees and payment.
Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer:
(a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process;
(b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process;
(c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards);
(d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and
(e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.
SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.
Licensed Product The term “Licensed Product” shall mean any product (a) the manufacture, use, importation, sale or offer for sale of which would, in the absence of the license granted by this Agreement, infringe a Valid Claim of any of the Licensed Patent Rights, or (b) that is comprised of, utilizes or incorporates Licensed Biological Materials, or (c) that is discovered, developed or made using a Licensed Process.
Marking of Licensed Products To the extent commercially feasible and consistent with prevailing business practices, Company shall xxxx, and shall cause its Affiliates and Sublicensees to xxxx, all Licensed Products that are manufactured or sold under this Agreement with the number of each issued patent under the Patent Rights that applies to such Licensed Product.
Royalty Beglend shall pay royalties to InNexus equal to 3% of Net Sales Revenue, calculated and payable as follows:
(a) any Royalty payable hereunder shall be calculated on a Product by Product basis for each jurisdiction (each a "Market Area")in which any such Product is sold;
(b) the period for which Beglend is required to pay a Royalty hereunder shall commence upon the first Launch of Product in a particular Market Area, and shall continue for the patent life of any Patents comprising the Licensed Technology or any Joint Patents which may hereafter be filed with respect to such Product or upon which such Product is based in that Market Area (the "Royalty Payment Period");
(c) the first Royalty payment shall be calculated for the broken period commencing from the date of the first Launch of Product to and including the last day of Beglend's fiscal year in which the Launch of Product took place; and any succeeding Royalty payments shall be calculated from the first day until the last day of the corresponding fiscal year; and all Royalty payments shall be payable by cheque, cash, or bank draft, to InNexus' order, and shall be paid within 180 days of the completion of Beglend's fiscal year corresponding to that payment; provided that, notwithstanding the foregoing, Beglend shall pay quarterly installments of the estimated amount of Royalty payments due for each fiscal quarter completed after the date of Launch of Product, which shall be payable within 90 days after the end of each such quarter, and shall, when calculating the amount of Royalty due for that fiscal year in accordance with sub-section 6.5(c), adjust the installment payable for the final quarter in each fiscal year to reflect Beglend's estimate of the actual amount payable, after accounting for each of the prior payments made in that fiscal year; and Beglend shall pay all royalties in the currencies in which the revenues giving rise to such payment obligation are received by Beglend unless otherwise agreed in writing between the parties;
(d) On or before 180 days following the end of each fiscal year of Beglend after the first Launch of Product, Beglend shall deliver to InNexus a statement indicating, in reasonable detail, as of the last day of the immediately preceding fiscal year, the calculation of Net Sales Revenue for each Product sold in each Market Area and the aggregate of the Royalty payable with respect to each such Product and each such Market Area for such year;
(e) Beglcnd will maintain up to date and complete records for the production and sale of Products in each Market Area including accounts, records, statements, the amount of free Products and sample Products distributed, Product returns relating to sales and marketing of the Product, and InNexus or its agent shall have the right at all reasonable times, including for a period of 12 months following the expiration or termination of this Agreement, to inspect such accounts, records and statements and make copies thereof at their own expense for the purpose of verifying the amount of Royalty payments to be made by Beglend to InNexus pursuant hereto; and InNexus shall have the right at its own expense to have such accounts audited by independent auditors once each year;
(f) Beglend shall have an audited statement prepared by its auditors (which shall be qualified certified public accountants or chartered accountants) for each year with respect to the Royalty payable to InNexus hereunder, by 180 days following the end of each fiscal year, and Beglend shall forthwith deliver a copy of such statement to InNexus;
(g) All Royalty payments shall be considered full and final satisfaction of all obligations of Beglend making the same in respect thereof if such payments or the calculations in respect thereof are not disputed by InNexus within 180 days after receipt by InNexus of the audited statement referred to in subsection 6.5(f) hereof; and any disputes under this subsection shall be decided by arbitration as herein provided;
(h) for the purpose of calculating Royalties, revenue shall be deemed to have been received when it has actually been received in the form of cash or credit or by way of any measurable benefit, advantage or concession; and in the event of any partial payment, the Royalty otherwise payable shall be pro-rated accordingly; in no event will Beglend be obligated to pay Royalties more than once in respect of any revenue received by it or its associates, affiliates, licensees or sub-licensees in connection with any single transaction (i.e. no "double" Royalties); and
(i) for any product containing both a pharmaceutically active agent which causes it to be considered a Product and one or more other pharmaceutically active agents which are not Products (each a "Combination Product"), the parties shall in good faith negotiate and agree to an appropriate adjustment to the Net Sales Revenue to reflect the relative contribution of each Product and each other pharmaceutically active agent which is not a Product to the Combination Product; and if, after good faith negotiations (not to exceed ninety (90) days in duration unless extended by mutual agreement), the parties can not agree to an appropriate adjustment, Net Sale Revenue shall be equal to Net Sales of the Combination Product multiplied by a fraction, the numerator of which is the reasonable fair market value of the Compounds contained in the Combination Product and the denominator of which is the reasonable fair market value of all pharmaceutically active agents contained in the Combination Product, as determined by arbitration.
Royalty Stacking Unity shall be entitled to deduct from the amounts owing to Ascentage under Sections 5.2 and 5.3 above [***] percent ([***]%) of any royalties or other payments made to Third Parties for Enabling IP, provided that (a) the total aggregate amount payable to Ascentage under Sections 5.2 and 5.3 in any [***] may not be reduced to less than [***] percent ([***]%) of the amounts that would otherwise be due Ascentage in such [***], and (b) Unity shall not be entitled to deduct any royalties or other payments made under the Existing Agreements. If, in any [***], Unity is not able to fully recover its [***] percent ([***]%) portion of the payments due to a Third Party, it shall be entitled to carry forward such right of off-set to future [***] with respect to the excess amount
Third Party Technology The Company makes use of third party technology to collect information required for traffic measurement, research, and analytics. Use of third party technology entails data collection. We therefore would like to inform clients the Company enables third parties to place or read cookies located on the browsers of users entering the Company’s domain. Said third parties may also use web beacons to collect information through advertising located on the Company’s web site. Please note that you may change your browser settings to refuse or disable Local Shared Objects and similar technologies; however, by doing so you may be disabling some of the functionality of Company’s services.
