Specific Orders Sample Clauses

Specific Orders. Prior to or during each quarter covered by a Quarterly Forecast, REG will deliver to West Central specific orders in a form reasonably agreed to by the Parties (each, a “Specific Order”), which will contain REG’s confirmation to West Central of its need for specific quantities of Oil per month. West Central will review all Specific Orders and the Parties will mutually agree upon a Total Price (utilizing the method set out in Section 4.1) applicable to Oil sold under a Specific Order. Subject to the other provisions of this Agreement, West Central will deliver to REG the quantity of Oil required by Specific Orders.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Specific Orders. Prior to or during each Period covered by a Forecast, Producer will deliver to Bunge specific orders in the form attached hereto as Exhibit B (each, a “Specific Order”), which will contain Producer’s confirmation to Bunge of its need for specific quantities of Oil per month as the result of sales of biodiesel by Producer at the Facility. Bunge will review all Specific Orders and the Parties will mutually agree upon a Total Price (as defined in Section 4.1) applicable to Oil sold under a Specific Order. Subject to the other provisions of this Agreement (including Sections 2.7 and 3.1), Bunge will deliver to Producer the quantity of Oil required by Specific Orders in accordance with this Article 2.
Sample 1Sample 2
Specific Orders. 7.1. By using a form on the website (clause 6.2.), it should be possible to order books that are not currently available in the Supplier's system. 7.2. The Supplier will communicate by email. It is also possible to contact the Supplier by phone. 7.3. The Supplier must confirm the receipt of EDI orders by email.
Sample 1
Specific Orders. Due to technical constraints, HEXONYS reserves the right to ship and invoice a quantity of goods that may vary by up to 10% more or less than the quantity shown on the order confirmation. The customer will take delivery of the quantity delivered and will pay the price.
Sample 1
Specific Orders. After Producer proposes to purchase Oil, the Contracting Parties will negotiate in good faith the Basis (as defined in Schedule 4.1) and delivery date(s) for the applicable quantity of oil, and if agreed, will enter into a purchase agreement for such Oil in the form attached hereto as Exhibit A (a “Specific Order”), which will set forth the mutually agreed-upon Basis and delivery date(s). Subject to the other provisions of this Agreement (including Section 3.1), Bunge will deliver to Producer Oil as required by Specific Orders under this Article 2.
Sample 1

Related to Specific Orders

  • Field Orders The documents listed in Paragraph 9.01.A are attached to this Agreement (except as expressly noted otherwise above).

  • Task Orders A. Some tasks and Services will be assigned to the Consultant through issuance of Task Orders. After the tasks and Services are identified and communicated to the Consultant by Valley Water Project Manager, Consultant will prepare a proposed Task Order (see Standard Consultant Agreement, Appendix Three Task Order Template). The proposed Task must identify the following: 1) Description of the services, including deliverables; 2) The total Not-to-Exceed Fees for Consultant to complete the services, including estimated number of hours per assigned staff to complete the services; 3) Proposed staff that will be assigned to complete the services, including resumes if not previously provided to Valley Water’s Project Manager; 4) Estimated cost of each other direct cost and reimbursable expense, including any applicable fees; 5) Schedule for completing the services; and 6) Copies of applicable state and federal permits required to complete the services, unless previously provided to Valley Water. B. Consultant agrees that the Not-to-Exceed Fees specified in a proposed Task Order will be the product of a good faith effort in exercising its professional judgment. After an agreement has been reached on the negotiable items, the finalized Task Order will be signed by both Valley Water’s authorized representative referenced in the Standard Consultant Agreement, Appendix One Additional Legal Terms (Appendix One), and Consultant’s authorized representative. C. Consultant must not commence performance of work or services on a Task Order until it has been approved by Valley Water’s authorized representative and Notice to Proceed has been issued by Valley Water Project Manager. No payment will be made for any services performed prior to approval or after the period of performance of the Task Order. The period of performance for Task Orders will be in accordance with dates specified in the Task Order. No Task Order will be written which extends beyond the expiration date of this Agreement. The total amount payable by Valley Water for an individual Task Order will not exceed the amount agreed to in the Task Order.

  • Minimum Orders Client may order Manufacturing Services for batches of Products only in multiples of the Minimum Order Quantities as set out in Schedule B to a Product Agreement.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Service Orders Service Order shall state the Customer’s minimum committed term of the Services arising thereunder from the date that such Services are made available to the Customer (“Initial Term”); if the Initial Term is not expressly stated in the Service Order, the Initial Term of the Services shall be deemed to be for a twelve (12) month term from the date that the Services are made available to the Customer. Unless a Party notifies the other Party of its intention not to renew the Services at least sixty (60) days prior the end of the Initial Term or then current term (“Term”), the Services shall automatically renew for subsequent twelve (12) month terms under the same terms and conditions except that the Fees may be adjusted to reflect Aptum’s then current pricing for such Services. Cancellation of any Service Order or a particular Service thereunder must be made by way of a cancellation request in writing or through a service ticket in accordance with the applicable Product Terms.

  • Work Orders If the Contract is for indefinite quantities of Services, as specified in the Signature Document, all Work will be performed in accordance with properly executed Work Orders.

  • Forecasts and Orders 2.2.1 On the Effective Date of this Agreement, PURCHASER shall give SELLER written notice of the quantity of Martek Product which PURCHASER estimates in good faith that it will order or direct the Designee(s) to order from SELLER during the remainder of the current calendar year (the “Initial Annual Forecast”). Not later than November 30 of each calendar year during the Term of this Agreement, PURCHASER shall give SELLER written notice of the quantity of Martek Product which PURCHASER estimates in good faith that it will order or direct the Designee(s) to order from SELLER during the next subsequent calendar year (each, an “Annual Forecast”). The Annual Forecast shall be used to establish the per unit and per kilogram pricing for the Martek Products purchased during the relevant calendar year in accordance with Section 2.3.1 and Exhibit A attached hereto; provided that, for the remainder of calendar year 2006, the per kilogram pricing to be used, subject to the year-end adjustment pursuant to Section 2.3.1, shall be * per kilogram, notwithstanding the Initial Annual Forecast. In addition to the foregoing, one (1) month before the commencement of each calendar quarter during the Term of this Agreement, PURCHASER shall provide SELLER with a forecast (a “Rolling Forecast”) of PURCHASER’s requirements for the Martek Product for each of the succeeding four (4) quarters, specifying quantities and requested delivery dates. These forecasts will be PURCHASER’s good-faith, best estimate of requirements and should not be considered a firm commitment. 2.2.2 PURCHASER expressly acknowledges that available supplies of the Martek Product have been in the past, and, may from time to time in the future, be insufficient to meet current demand. Nevertheless, SELLER shall use commercially reasonable efforts to have available for shipment to PURCHASER or to a Designee for PURCHASER’s account such quantities of the Martek Product as PURCHASER forecasts in good faith pursuant to Section 2.2.1 above and any additional quantities which PURCHASER may reasonably request. In case for any reason SELLER cannot or does not supply such quantities of the Martek Products as are forecasted in good faith by PURCHASER pursuant to Section 2.2.1 to PURCHASER, PURCHASER shall be allowed to use an alternative supplier for quantities of Omega-3 and Omega-6 long-chain polyunsaturated fatty acids equal to those quantities of Martek Products that were ordered by PURCHASER pursuant to a Purchase Order and not delivered by SELLER. 2.2.3 PURCHASER shall issue and/or shall direct the Designee(s) to issue formal purchase orders (“Purchase Orders”) at least sixty (60) but no more than ninety (90) days in advance of the date on which PURCHASER or the Designee requests that SELLER ship the Martek Product. SELLER shall accept or reject any such Purchase Order within five (5) business days of receipt, provided that SELLER shall not reject any Purchase Order for any quantities within the most recent forecast. 2.2.4 Purchase Orders which have been accepted by SELLER shall be considered as firm and binding orders (subject to the provisions of Section 2.2.2 above) and shall only be canceled or amended by mutual written agreement of the parties. * CONFIDENTIAL TREATMENT REQUESTED. CONFIDENTIAL PORTION HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION.

  • Forecasts and Purchase Orders (a) Following Regulatory Approval of one of the Initial Products during the term of this Agreement, Reliant shall provide to ASL no later than the first day of the first month of each calendar quarter a non-binding good faith estimate (“Quarterly Forecast”) by quarter of Reliant’s requirements for the Active Ingredient for the calendar quarter and the succeeding three (3) calendar quarters. Reliant will be obligated to purchase 75% of the quantities of API forecasted for the first two (2) succeeding calendar quarters of each Quarterly Forecast. Within (30) days of Regulatory Approval, Reliant shall provide an initial forecast (“Initial Forecast”) for the four calendar quarters following Regulatory Approval. (b) Reliant shall place binding purchase orders for Active Ingredient by written or electronic purchase order (or by any other means agreed to by the parties) to ASL, which shall be placed at least ninety (90) days prior to desired date of delivery. (c) ASL shall be obligated to supply Active Ingredient as ordered by Reliant. To the extent purchase orders in any calendar month exceed One Hundred Fifty percent (150%) of the Quarterly Forecast for the relevant quarter, ASL shall use its best efforts to supply 125% of the quantity ordered. (d) ASL shall maintain minimum inventory levels equal to the binding portion of the then current Quarterly Forecast. The Active Ingredient shall be shipped C.I.F. Duty Unpaid to a Designated Facility or other location agreed by the parties. Active Ingredient shall be shipped upon completion of production in temperature-controlled vehicles in accordance with the specifications including light protecting containers and the Quality Agreement in order to maintain the quality of the Active Ingredient. Carriers selected by ASL must be commercially reputable, able to track shipments and fully insured with adequate coverage to replace the value of the goods shipped. Title and risk of loss pass on delivery to the Designated Facility. (e) All shipments of Active Ingredient shall be accompanied by a packing slip and a certificate of analysis which describes the Active Ingredient, states the purchase order number, confirms that the Active Ingredient conforms in all ways with the Specifications, the Process Description and was manufactured in accordance with GMP and all other requirements of the Act. To the extent of any conflict or inconsistency between this Agreement and any purchase order, purchase order release, confirmation, acceptance or any similar document, the terms of this Agreement shall govern. (f) Reliant shall notify ASL of any short-shipment claims within thirty (30) days of receipt of a shipment of Active Ingredient. (g) ASL shall not be obligated to accept any returns of Active Ingredient other than as a result of such Active Ingredient failing to meet the Specifications in accordance with Section 2.9(a), was not manufactured in accordance with GMP, or does not otherwise comply with the manufacturing, storage and/or transportation requirements of the Act.

  • Technical Specifications and Drawings a) The Goods and Related Services supplied under this Contract shall conform to the technical specifications and standards mentioned in Section VI, Schedule of Requirements and, when no applicable standard is mentioned, the standard shall be equivalent or superior to the official standards whose application is appropriate to the Goods' country of origin. b) The Supplier shall be entitled to disclaim responsibility for any design, data, drawing, specification or other document, or any modification thereof provided or designed by or on behalf of the Procuring Entity, by giving a notice of such disclaimer to the Procuring Entity. c) Wherever references are made in the Contract to codes and standards in accordance with which it shall be executed, the edition or the revised version of such codes and standards shall be those specified in the Schedule of Requirements. During Contract execution, any changes in any such codes and standards shall be applied only after approval by the Procuring Entity and shall be treated in accordance with GCC Clause 33.

  • Stop Work Orders A. The JBE may, at any time, by Notice to Contractor, require Contractor to stop all or any part of the Services for a period up to ninety (90) days after the Notice is delivered to Contractor, and for any further period to which the parties may agree (“Stop Work Order”). The Stop Work Order shall be specifically identified as such and shall indicate it is issued under this provision. Upon receipt of the Stop Work Order, Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the Services covered by the Stop Work Order during the period of stoppage. Within ninety (90) days after a Stop Work Order is delivered to Contractor, or within any extension of that period to which the parties shall have agreed, the JBE shall either (i) cancel the Stop Work Order; or (ii) terminate the Services covered by the Stop Work Order as provided for in this Agreement. B. If a Stop Work Order issued under this provision is canceled or the period of the Stop Work Order or any extension thereof expires, Contractor shall resume the performance of Services. The JBE shall make an equitable adjustment in the delivery schedule, the Contract Amount, or both, and the Agreement shall be modified, in writing, accordingly, if: i. The Stop Work Order results in an increase in the time required for, or in Contractor’s cost properly allocable to the performance of any part of this Agreement; and ii. Contractor requests an equitable adjustment within thirty (30) days after the end of the period of stoppage; however, if the JBE decides the facts justify the action, the JBE may receive and act upon a proposal submitted at any time before final payment under this Agreement. C. The JBE shall not be liable to Contractor for loss of profits because of a Stop Work Order issued under this provision.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!