Standards Compliance. 2.1 Stds. Comp. All work and materials covered by this Solicitation and resulting Master Contract(s) shall be performed in compliance with Chapter 19.28.410 Revised Code of Washington, Chapter 296-46B-010 Washington Administrative Code, and the most current versions of the following mandatory standards: • NFPA-70 National Electrical Code • ANSI\TIA\EIA 568 series, Commercial Building Telecommunications Cabling Standard • ANSI\TIA\EIA 569-E , Commercial Building Standard for Telecommunications Pathways and Spaces, o Ex. Pathways, Work area outlets, Patch panels, Racks and cabinets, Ports, Grounding, busbars, Cabling, Firestop locations, Telecommunications space, Data center room grid • ANSI\TIA\EIA 606-C Commercial Building Telecommunication standard for Labeling • ANSI-J-STD-607-C, Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications • ANSI\EIA\TIA 862-B Structured Cabling infrastructure Standard for Intelligent building Systems (Building Automation standard) • ANSI\EIA\TIA 942-B Telecommunications standard for Data centers • OSHA/WISHA Construction and safety standards Any additional codes/standards required under a Purchaser’s Purchase Order/SOW or by state or federal regulation. Bidder will be held responsible for compliance with the most recent versions of the specified codes/standards/regulations and any revisions or updates. Should conflicts arise with the foregoing, the Department of Enterprise Services will have responsibility for making final interpretation. MANDATORY Fully Meets 3.0 Cert. CERTIFICATION: 3.1 Cert. COMPANY CERTIFICATIONS. Bidder must maintain certification from the Manufacturer(s) that provides structured cabling system twenty-five (25) year or more warranties as identified in Bidder’s response to this RFQQ. Written Response Required. List the Manufacturer(s) Certifications you maintain that meet this requirement. MANDATORY SCORED ▇▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution Provider, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, Ortronics/Superior Essex Certified Installer and Corning Preferred Installer. 3.2 Cert. COMPANY CERTIFICATIONS. The Bidder response must provide documentation that the company is certified by at least one (1) manufacturer that provides structured cabling-system 20-year-or-more warranties in Washington state. For example: • Commscope (Systimax) Ortronics, Inc. (Certified Installer-Plus Program); • AMP (Netconnect Design and Installation Program); • Leviton (Certified Cabling System); • Belden (IBDN). These manufacturers are examples only – the list is not all-inclusive. Written Response Required. Bidder must identify the certified warranty manufacturer and provide a photocopy of said certification(s).If Bidder has more than one manufacturer certification, please submit any additional certifications. MANDATORY SCORED ▇▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution Provider, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, Ortronics/Super Essex Certified Installer and Corning Preferred Installer. 3.3 Cert. COMPANY CERTIFICATIONS. Bidder must have employed staff or subcontractors that meet the certification criteria for installation for each Manufacturer upon which award of this Master Contract is predicated. MANDATORY Fully Meets 3.4 Cert. COMPANY CERTIFICATIONS. Bidder installation personnel that work onsite must have International, or Manufacturer certification in accordance with industry standards and best practice methodologies and must be proficient with the installation and termination of all equipment that is to be installed onsite. Upon request Bidder will furnish a copy of such certification to Purchaser or DES. MANDATORY Fully Meets 3.5 Cert. EMPLOYEE CERTIFICATION/TRAINING. Any person working on the installation or maintenance of purchaser-owned equipment must be manufacturer-certified by the equipment manufacturer, to maintain a manufacturer warrantied solution. Manufacturer Certification is defined as attendance and successful completion of certification-requirement training within a manufacturer’s program. Any person working on the installation or maintenance of purchaser-owned equipment that does NOT have a new or existing manufacturer warranty, must be international professional telecommunications society certified [ex. Bicsi (Building Industry Consulting Services International), TIA (Telecommunications Industry Association), ETA International, FOA (The Fiber Optic Association)]. Certificates for all persons working on the installation or maintenance of purchaser- owned equipment must be submitted to Purchaser with a quote or Statement of Work (SOW) BEFORE starting any work. Written Response Required. MANDATORY SCORED Fully Meets ▇▇▇▇▇▇▇, Inc. continually maintains employee certification training and requirements. 3.6 Cert. FIBER OPTIC CERTIFICATION. Please describe any certification/training by the Fiber Optic Association (FOA) or any qualified Industry training certification organization(s) specifically for fiber-optic or premises cabling. Written Response Required. Attach copies of any Fiber Optic or premises certifications. HIGHLY DESIRABLE Fully Meets ▇▇▇▇▇▇▇, Inc. is Corning, Panduit, Systimax and Leviton/▇▇▇▇-Tek Superior Essex fiber optic certified. ▇▇▇▇▇▇▇, Inc. continually trains our fiber optic technicians through Light Brigade. 4.0 Lic & Staff LICENSING AND STAFFING: 4.1 Lic & Staff. PROJECT MANAGER: Bidder must assign a project manager for each Purchaser project. Purchaser must have approval rights over the project manager, or any replacements thereof. The project manager must be the principal point of contact for Purchaser and must coordinate Bidder’s activities. The project manager must produce and maintain a complete plan for all Bidder-related activities concerning the Purchaser’s order document/statement of work. Written Response Required. Provide the name(s) and a brief description of experience for key personnel who might perform the job of Bidder Project Manager. MANDATORY SCORED Fully Meets ▇▇▇▇▇ ▇▇▇▇▇ has 25 years in contruction trades, with 14 years in the electrical field. He maintains two electrical licenses, EL02 and EL06. Caleb has been with ▇▇▇▇▇▇▇ for 11 years. He spent four years in the field as a ▇▇▇▇▇▇▇/GF before becoming a Project Manager and leading our Service Department. 4.2 Lic & Staff. ELECTRICIANS. Bidder must have employed staff or subcontractors that meet the Licensed Electricians licensing requirements of chapter 19.28 RCW. MANDATORY Fully Meets 4.3 Lic & Staff. ELECTRICIANS. Bidder must have at least one (1) employed staff or subcontractor that holds certificates of competency as at least a Journey Level Electrician per requirements of RCW 19.28.161. Written Response Required. Provide the name(s) of any such person(s) and photocopy(s) of certificate(s). MANDATORY SCORED Fully Meets • ▇▇▇▇▇▇▇, Inc. has a dedicated team supporting our Technologies group. ▇▇▇▇▇ ▇▇▇▇▇ (EL06), ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇ ▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇▇ ▇'▇▇▇▇▇ (EL01) 4.4 Lic & Staff. REGISTERED COMMUNICATIONS DISTRIBUTION DESIGNERS. Bidder must maintain one or more full- time Registered Communications Distribution Designers (RCDD) on staff. A subcontractor cannot fulfill this requirement. Written Response Required. List Name of RCDD, status (part-time, or full-time) and years of experience. Describe a job where an RCDD provided a design for your business in Exhibit D1 Work History by Region. Attach photocopies of all certificates for RCDD(s). HIGHLY DESIRABLE Fully Meets ▇▇▇▇ ▇▇▇▇▇▇▇ holds an active RCDD and is employed full time ▇▇▇▇▇▇▇, Inc. Josh has 21 years of experience in telecommunications field. Josh provided the design at ▇▇▇▇▇▇▇, Inc.'s Bellevue College project.
Appears in 1 contract
Sources: Master Contract
Standards Compliance. 2.1 Stds. Comp. All work and materials covered by this Solicitation and resulting Master Contract(s) shall be performed in compliance with Chapter 19.28.410 Revised Code of Washington, Chapter 296-46B-010 Washington Administrative Code, and the most current versions of the following mandatory standards: • NFPA-70 National Electrical Code • ANSI\TIA\EIA 568 series, Commercial Building Telecommunications Cabling Standard • ANSI\TIA\EIA 569-E , Commercial Building Standard for Telecommunications Pathways and Spaces, o Ex. Pathways, Work area outlets, Patch panels, Racks and cabinets, Ports, Grounding, busbars, Cabling, Firestop locations, Telecommunications space, Data center room grid • ANSI\TIA\EIA 606-C Commercial Building Telecommunication standard for Labeling • ANSI-J-STD-607-C, Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications • ANSI\EIA\TIA 862-B Structured Cabling infrastructure Standard for Intelligent building Systems (Building Automation standard) • ANSI\EIA\TIA 942-B Telecommunications standard for Data centers • OSHA/WISHA Construction and safety standards Any additional codes/standards required under a Purchaser’s Purchase Order/SOW or by state or federal regulation. Bidder will be held responsible for compliance with the most recent versions of the specified codes/standards/regulations and any revisions or updates. Should conflicts arise with the foregoing, the Department of Enterprise Services will have responsibility for making final interpretation. MANDATORY Fully Meets 3.0 Cert. CERTIFICATION: 3.1 Cert. COMPANY CERTIFICATIONS. Bidder must maintain certification from the Manufacturer(s) that provides structured cabling system twenty-five (25) year or more warranties as identified in Bidder’s response to this RFQQ. Written Response Required. List the Manufacturer(s) Certifications you maintain that meet this requirement. MANDATORY SCORED ▇Fully Meets Beldon, Corning, Leviton (▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution ProviderAK and Grand Prairie, Silver TX), and Panduit Certified Installer, Fully Meets Leviton/certifications attached. ▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installerhas the ability to become certified by any manufacturer after award, Ortronics/Superior Essex Certified Installer and Corning Preferred Installerif necessary. 3.2 Cert. COMPANY CERTIFICATIONS. The Bidder response must provide documentation that the company is certified by at least one (1) manufacturer that provides structured cabling-system 20-year-or-more warranties in Washington state. For example: • Commscope (Systimax) Ortronics, Inc. (Certified Installer-Plus Program); • AMP (Netconnect Design and Installation Program); • Leviton (Certified Cabling System); • Belden ▇▇▇▇▇▇ (IBDN). These manufacturers are examples only – the list is not all-inclusive. Written Response Required. Bidder must identify the certified warranty manufacturer and provide a photocopy of said certification(s).If Bidder has more than one manufacturer certification, please submit any additional certifications. MANDATORY SCORED ▇Fully Meets Beldon, Corning, Leviton (▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution ProviderAK and Grand Prairie, Silver TX), and Panduit Certified Installer, Fully Meets Leviton/certifications attached. ▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installerhas the ability to become certified by any manufacturer after award, Ortronics/Super Essex Certified Installer and Corning Preferred Installerif necessary. 3.3 Cert. COMPANY CERTIFICATIONS. Bidder must have employed staff or subcontractors that meet the certification criteria for installation for each Manufacturer upon which award of this Master Contract is predicated. MANDATORY Fully Meets 3.4 Cert. COMPANY CERTIFICATIONS. Bidder installation personnel that work onsite must have International, or Manufacturer certification in accordance with industry standards and best practice methodologies and must be proficient with the installation and termination of all equipment that is to be installed onsite. Upon request Bidder will furnish a copy of such certification to Purchaser or DES. MANDATORY Fully Meets 3.5 Cert. EMPLOYEE CERTIFICATION/TRAINING. Any person working on the installation or maintenance of purchaser-owned equipment must be manufacturer-certified by the equipment manufacturer, to maintain a manufacturer warrantied solution. Manufacturer Certification is defined as attendance and successful completion of certification-requirement training within a manufacturer’s program. Any person working on the installation or maintenance of purchaser-owned equipment that does NOT have a new or existing manufacturer warranty, must be international professional telecommunications society certified [ex. Bicsi (Building Industry Consulting Services International), TIA (Telecommunications Industry Association), ETA International, FOA (The Fiber Optic Association)]. Certificates for all persons working on the installation or maintenance of purchaser- owned equipment must be submitted to Purchaser with a quote or Statement of Work (SOW) BEFORE starting any work. Written Response Required. MANDATORY SCORED Fully Meets ▇▇▇▇▇▇▇, Inc. continually maintains employee certification training and requirements. 3.6 Cert. FIBER OPTIC CERTIFICATION. Please describe any certification/training by the Fiber Optic Association (FOA) or any qualified Industry training certification organization(s) specifically for fiber-optic or premises cabling. Written Response Required. Attach copies of any Fiber Optic or premises certifications. HIGHLY DESIRABLE Fully Meets ▇▇▇▇▇▇▇, Inc. is Corning, Panduit, Systimax and Leviton/▇▇▇▇-Tek Superior Essex fiber optic certified. ▇▇▇▇▇▇▇, Inc. continually trains our fiber optic technicians through Light Brigade. 4.0 Lic & Staff LICENSING AND STAFFING: 4.1 Lic & Staff. PROJECT MANAGER: Bidder must assign a project manager for each Purchaser project. Purchaser must have approval rights over the project manager, or any replacements thereof. The project manager must be the principal point of contact for Purchaser and must coordinate Bidder’s activities. The project manager must produce and maintain a complete plan for all Bidder-related activities concerning the Purchaser’s order document/statement of work. Written Response Required. Provide the name(s) and a brief description of experience for key personnel who might perform the job of Bidder Project Manager. MANDATORY SCORED Fully Meets ▇▇▇▇▇ ▇▇▇▇▇ has 25 years in contruction tradesthe ability to have all employees manufacturer certified and will do so upon award, with 14 years in the electrical field. He maintains two electrical licenses, EL02 and EL06. Caleb has been with ▇▇▇▇▇▇▇ for 11 years. He spent four years in the field as a ▇▇▇▇▇▇▇/GF before becoming a Project Manager and leading our Service Department. 4.2 Lic & Staff. ELECTRICIANS. Bidder must have employed staff or subcontractors that meet the Licensed Electricians licensing requirements of chapter 19.28 RCW. MANDATORY Fully Meets 4.3 Lic & Staff. ELECTRICIANS. Bidder must have at least one (1) employed staff or subcontractor that holds certificates of competency as at least a Journey Level Electrician per requirements of RCW 19.28.161. Written Response Required. Provide the name(s) of any such person(s) and photocopy(s) of certificate(s). MANDATORY SCORED Fully Meets • ▇▇▇▇▇▇▇, Inc. has a dedicated team supporting our Technologies group. ▇▇▇▇▇ ▇▇▇▇▇ (EL06), ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇ ▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇▇ ▇'▇▇▇▇▇ (EL01) 4.4 Lic & Staff. REGISTERED COMMUNICATIONS DISTRIBUTION DESIGNERS. Bidder must maintain one or more full- time Registered Communications Distribution Designers (RCDD) on staff. A subcontractor cannot fulfill this requirement. Written Response Required. List Name of RCDD, status (part-time, or full-time) and years of experience. Describe a job where an RCDD provided a design for your business in Exhibit D1 Work History by Region. Attach photocopies of all certificates for RCDD(s). HIGHLY DESIRABLE Fully Meets ▇▇▇▇ ▇▇▇▇▇▇▇ holds an active RCDD and is employed full time ▇▇▇▇▇▇▇, Inc. Josh has 21 years of experience in telecommunications field. Josh provided the design at ▇▇▇▇▇▇▇, Inc.'s Bellevue College projectneeded.
Appears in 1 contract
Sources: Master Contract
Standards Compliance. 2.1 Stds. Comp. All work and materials covered by this Solicitation and resulting Master Contract(s) shall be performed in compliance with Chapter 19.28.410 Revised Code of Washington, Chapter 296-46B-010 Washington Administrative Code, and the most current versions of the following mandatory standards: • NFPA-70 National Electrical Code • ANSI\TIA\EIA 568 series, Commercial Building Telecommunications Cabling Standard • ANSI\TIA\EIA 569-E , Commercial Building Standard for Telecommunications Pathways and Spaces, o Ex. Pathways, Work area outlets, Patch panels, Racks and cabinets, Ports, Grounding, busbars, Cabling, Firestop locations, Telecommunications space, Data center room grid • ANSI\TIA\EIA 606-C Commercial Building Telecommunication standard for Labeling • ANSI-J-STD-607-C, Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications • ANSI\EIA\TIA 862-B Structured Cabling infrastructure Standard for Intelligent building Systems (Building Automation standard) • ANSI\EIA\TIA 942-B Telecommunications standard for Data centers • OSHA/WISHA Construction and safety standards Any additional codes/standards required under a Purchaser’s Purchase Order/SOW or by state or federal regulation. Bidder will be held responsible for compliance with the most recent versions of the specified codes/standards/regulations and any revisions or updates. Should conflicts arise with the foregoing, the Department of Enterprise Services will have responsibility for making final interpretation. MANDATORY Fully Meets 3.0 Cert. CERTIFICATION: 3.1 Cert. COMPANY CERTIFICATIONS. Bidder must maintain certification from the Manufacturer(s) that provides structured cabling system twenty-five (25) year or more warranties as identified in Bidder’s response to this RFQQ. Written Response Required. List the Manufacturer(s) Certifications you maintain that meet this requirement. MANDATORY SCORED Fully Meets ▇▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution Provider, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, : Ortronics/Superior Essex Certified Installer and Corning Preferred Installer. 3.2 Cert. COMPANY CERTIFICATIONS. The Bidder response must provide documentation that the company is certified by at least one (1) manufacturer that provides structured cabling-system 20-year-or-more warranties in Washington state. For example: • Commscope (Systimax) Ortronics, Inc. (Certified Installer-Plus Program); • AMP (Netconnect Design and Installation Program); • Leviton (Certified Cabling System); • Belden ▇▇▇▇▇▇ (IBDN). These manufacturers are examples only – the list is not all-inclusive. Written Response Required. Bidder must identify the certified warranty manufacturer and provide a photocopy of said certification(s).If Bidder has more than one manufacturer certification, please submit any additional certifications. MANDATORY SCORED Fully Meets ▇▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution Provider, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, : Ortronics/Super Superior Essex Certified Installer and Corning Preferred Installer. 3.3 Cert. COMPANY CERTIFICATIONS. Bidder must have employed staff or subcontractors that meet the certification criteria for installation for each Manufacturer upon which award of this Master Contract is predicated. MANDATORY Fully Meets 3.4 Cert. COMPANY CERTIFICATIONS. Bidder installation personnel that work onsite must have International, or Manufacturer certification in accordance with industry standards and best practice methodologies and must be proficient with the installation and termination of all equipment that is to be installed onsite. Upon request Bidder will furnish a copy of such certification to Purchaser or DES. MANDATORY Fully Meets 3.5 Cert. EMPLOYEE CERTIFICATION/TRAINING. Any person working on the installation or maintenance of purchaser-owned equipment must be manufacturer-certified by the equipment manufacturer, to maintain a manufacturer warrantied solution. Manufacturer Certification is defined as attendance and successful completion of certification-requirement training within a manufacturer’s program. Any person working on the installation or maintenance of purchaser-owned equipment that does NOT have a new or existing manufacturer warranty, must be international professional telecommunications society certified [ex. Bicsi (Building Industry Consulting Services International), TIA (Telecommunications Industry Association), ETA International, FOA (The Fiber Optic Association)]. Certificates for all persons working on the installation or maintenance of purchaser- owned equipment must be submitted to Purchaser with a quote or Statement of Work (SOW) BEFORE starting any work. Written Response Required. MANDATORY SCORED Fully Meets ▇▇▇▇▇▇▇, Inc. continually maintains employee certification training and requirements. : Ortronics/Superior Essex 3.6 Cert. FIBER OPTIC CERTIFICATION. Please describe any certification/training by the Fiber Optic Association (FOA) or any qualified Industry training certification organization(s) specifically for fiber-optic or premises cabling. Written Response Required. Attach copies of any Fiber Optic or premises certifications. HIGHLY DESIRABLE Fully Meets ▇▇▇▇▇▇▇, Inc. is Corning, Panduit, Systimax and Leviton/▇▇▇▇-Tek : Ortronics/Superior Essex fiber optic certified. ▇▇▇▇▇▇▇, Inc. continually trains our fiber optic technicians through Light Brigade. 4.0 Lic & Staff LICENSING AND STAFFING: 4.1 Lic & Staff. PROJECT MANAGER: Bidder must Bidd▇▇ ▇▇▇t assign a project manager for each Purchaser project. Purchaser must have approval rights over the project manager, or any replacements thereof. The project manager must be the principal point of contact for Purchaser and must coordinate Bidder’s activities. The project manager must produce and maintain a complete plan for all Bidder-related activities concerning the Purchaser’s order document/statement of work. Written Response Required. Provide the name(s) and a brief description of experience for key personnel who might perform the job of Bidder Project Manager. MANDATORY SCORED Fully Meets ▇▇▇▇▇ ▇▇▇▇▇ has 25 years in contruction trades, with 14 years in the electrical field. He maintains two electrical licenses, EL02 and EL06. Caleb has been with ▇▇▇▇▇▇▇ for 11 years. He spent four years in the field as a ▇▇▇▇▇▇▇/GF before becoming a Project Manager , ▇▇oject Manager: oversee the team of Telecommunications Leads who install, repair, and leading our Service Departmentmaintain all of the products and services of the company. Oversees and directs construction management. Communicates directly with contractors/designers concerning project cost, staffing, and scheduling. Prepares project status reports and works to ensure plans adhere to contract specifications. 4.2 Lic & Staff. ELECTRICIANS. Bidder must have employed staff or subcontractors that meet the Licensed Electricians licensing requirements of chapter 19.28 RCW. MANDATORY Fully Meets 4.3 Lic & Staff. ELECTRICIANS. Bidder must have at least one (1) employed staff or subcontractor that holds certificates of competency as at least a Journey Level Electrician per requirements of RCW 19.28.161. Written Response Required. Provide the name(s) of any such person(s) and photocopy(s) of certificate(s). MANDATORY SCORED Fully Meets • ▇▇▇▇▇▇▇o Current Electric of WA, Inc. has a dedicated team supporting our Technologies group. ▇▇▇▇▇ ▇▇▇▇▇ (EL06), ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ (EL06) LLC; ▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇▇.▇ ▇▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇ ▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇▇ ▇'▇▇▇▇▇ (EL01) 4.4 Lic & Staff. REGISTERED COMMUNICATIONS DISTRIBUTION DESIGNERS. Bidder must maintain one or more full- time Registered Communications Distribution Designers (RCDD) on staff. A subcontractor cannot fulfill this requirement. Written Response Required. List Name of RCDD, status (part-time, or full-time) and years of experience. Describe a job where an RCDD provided a design for your business in Exhibit D1 Work History by Region. Attach photocopies of all certificates for RCDD(s). HIGHLY DESIRABLE Does Not Meet LoVo▇▇ ▇▇▇s not currently have an RCDD staff member; although the company does employ two full-time Project Managers that meet/exceed the eligibility requirements established by Bics▇ ▇▇ apply for the RCDD Certification exam through verifiable experience within the ICT field. 4.5 Lic & Staff. TELECOMMUNICATIONS ADMINISTRATORS. Bidder must employ at least one (1) individual who possesses a Telecommunications Administrator certificate that meets the requirements of RCW 19.28.430. Written Response Required. Provide the name of such person(s) and photocopy(s) of certificate(s). HIGHLY DESIRABLE Fully Meets ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ holds an active RCDD * ▇.0 Ungd & Aerial (OUT) UNDERGROUND AND AERIAL EXPERTISE – OUTSIDE CATEGORY ONLY: * 5.1 Ungd & Aerial Bidders must employ staff or subcontractors with expertise and is employed full time equipment to conduct outside plant projects that are underground or aerial. Written Response Required. Provide a list of key outside plant employees or subcontractors and a brief description of their experience with outside plant projects. MANDATORY SCORED Written Response Required. 6.0 PO/SOW PURCHASE ORDERS/ STATEMENT OF WORK (SOW) 6.1 PO/SOW ORDERING REQUIREMENTS. Eligible Purchasers shall order goods and/or services from any resulting Master Contract, consistent with the terms hereof and by using any ordering mechanism agreeable both to Bidder and Purchaser but, at a minimum, including the use of a Purchase Order, or Statement of Work (SOW). When practicable, Bidder and Purchaser also shall use telephone orders, email orders, web-based orders, and similar procurement methods (collectively “Purchaser Order”). All order documents must reference the Master Contract number. The terms of any resulting Master Contract shall apply to any Purchase Order or SOW and, in the event of any conflict, the terms of the resulting Master Contract shall prevail. Notwithstanding any provision to the contrary, in no event shall any ‘click-agreement,’ software or web-based application terms and conditions, or other agreement modify the terms and conditions of any resulting Master Contract. MANDATORY Fully Meets 6.2 PO/SOW PURCHASE ORDERS/STATEMENT OF WORK (SOW). Bidder shall, in accordance with all terms and conditions of this Master Contract, fully perform and shall be obligated to comply with all Purchase Orders/SOW received by the Bidder prior to the expiration hereof, unless otherwise directed in writing by the Contract Administrator, including, without limitation, all Purchase Orders/SOW received prior to but not fully performed and satisfied at the expiration of this Contract. MANDATORY Fully Meets 6.3 PO/SOW CHANGE ORDERS: All modifications, additions or revisions to the Purchase Order/SOW MUST be agreed to, and must be approved by Purchaser in writing before proceeding with any additions or revisions to services or materials provided by Bidder. MANDATORY Fully Meets 7.0 Ste Seq & Access SITE SECURITY AND ACCESS: 7.1 Ste Seq & Access While on Purchaser’s premises, Bidder, its agents, employees, or subcontractors must conform in all respects with physical, fire, and security regulations. Bidder understands that all Purchaser’s building entrances are controlled for access. Bidd▇▇ ▇▇▇ees to become familiar with Purc▇▇▇▇▇’▇ building and security policies, and further agrees to observe and comply with all Purchaser’s building and security policies or procedures. Bidder understands that in order to obtain access to Purchaser’s premises, Bidder must be issued a security badge by Purchaser. Bidder must provide certain personal information, including valid government issued photo identification, prior to obtaining a security badge. Bidder further understands that Purchaser will collect and retain such personal information for so long as the contract is in effect and such individual(s) has access to the premises. Purchaser reserves the right to deny an application for a security badge. Failure of Bidder to comply with Purchaser’s security and safety policies and procedures is sufficient grounds for revoking, modifying, suspending or terminating access to Purchaser’s facilities. MANDATORY Fully Meets 8.0 Ship & Risk of Loss SHIPPING AND RISK OF LOSS: 8.1 Ship & Risk of Loss SHIPPING. Bidder must ship all materials purchased pursuant to this Contract, freight prepaid, FOB Purchaser’s destination. The method of shipment must be consistent with the nature of the materials and hazards of transportation. MANDATORY Fully Meets 8.2 Ship & Risk of Loss RISK OF LOSS. Regardless of FOB point, Bidd▇▇, Inc. Josh has 21 years of experience in telecommunications field. Josh provided the design at ▇ ▇▇▇▇▇▇▇ees to bear all risks of loss, Inc.'s Bellevue College project.damage, or destruction of the materials ordered hereunder that occurs prior to Acceptance, except loss or damage attributable to Purchaser’s fault or negligence; and such loss, damage, or destruction must not release Bidder from any obligation hereunder. After Acceptance, the risk of loss or damage must be borne by Purchaser, except loss or damage attributable to Bidder’s fault or negligence. MANDATORY Fully Meets 9.0 Const. Coord. CONSTRUCTION COORDINATION: 9.1
Appears in 1 contract
Sources: Master Contract
Standards Compliance. 2.1 Stds. Comp. All work and materials covered by this Solicitation and resulting Master Contract(s) shall be performed in compliance with Chapter 19.28.410 Revised Code of Washington, Chapter 296-46B-010 Washington Administrative Code, and the most current versions of the following mandatory standards: • NFPA-70 National Electrical Code • ANSI\TIA\EIA 568 series, Commercial Building Telecommunications Cabling Standard • ANSI\TIA\EIA 569-E , Commercial Building Standard for Telecommunications Pathways and Spaces, o Ex. Pathways, Work area outlets, Patch panels, Racks and cabinets, Ports, Grounding, busbars, Cabling, Firestop locations, Telecommunications space, Data center room grid • ANSI\TIA\EIA 606-C Commercial Building Telecommunication standard for Labeling • ANSI-J-STD-607-C, Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications • ANSI\EIA\TIA 862-B Structured Cabling infrastructure Standard for Intelligent building Systems (Building Automation standard) • ANSI\EIA\TIA 942-B Telecommunications standard for Data centers • OSHA/WISHA Construction and safety standards Any additional codes/standards required under a Purchaser’s Purchase Order/SOW or by state or federal regulation. Bidder will be held responsible for compliance with the most recent versions of the specified codes/standards/regulations and any revisions or updates. Should conflicts arise with the foregoing, the Department of Enterprise Services will have responsibility for making final interpretation. MANDATORY Fully Meets 3.0 Cert. CERTIFICATION: 3.1 Cert. COMPANY CERTIFICATIONS. Bidder must maintain certification from the Manufacturer(s) that provides structured cabling system twenty-five (25) year or more warranties as identified in Bidder’s response to this RFQQ. Written Response Required. List the Manufacturer(s) Certifications you maintain that meet this requirement. MANDATORY SCORED Fully Meets Interwest Communications is certified by the following structured cabling manufacturers to provide a 25- year structured cabling warranty. Certificate copies attached to this document. 1. ▇▇▇▇-Tek Oasis Certified Integrator 2. Leviton Certified Cabling System 3. ▇▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution Provider, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, Mission Critical Warranty 4. Ortronics/Superior Essex Legrand Certified Installer and Corning Preferred Installer. Contractor 3.2 Cert. COMPANY CERTIFICATIONS. The Bidder response must provide documentation that the company is certified by at least one (1) manufacturer that provides structured cabling-system 20-year-or-more warranties in Washington state. For example: • Commscope (Systimax) Ortronics, Inc. (Certified Installer-Plus Program); • AMP (Netconnect Design and Installation Program); • Leviton (Certified Cabling System); • Belden ▇▇▇▇▇▇ (IBDN). These manufacturers are examples only – the list is not all-inclusive. Written Response Required. Bidder must identify the certified warranty manufacturer and provide a photocopy of said certification(s).If Bidder has more than one manufacturer certification, please submit any additional certifications. MANDATORY SCORED ▇▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution Provider, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, Ortronics/Super Essex Certified Installer and Corning Preferred InstallerCertificates Attached. 3.3 Cert. COMPANY CERTIFICATIONS. Bidder must have employed staff or subcontractors that meet the certification criteria for installation for each Manufacturer upon which award of this Master Contract is predicated. MANDATORY Fully Meets 3.4 Cert. COMPANY CERTIFICATIONS. Bidder installation personnel that work onsite must have International, or Manufacturer certification in accordance with industry standards and best practice methodologies and must be proficient with the installation and termination of all equipment that is to be installed onsite. Upon request Bidder will furnish a copy of such certification to Purchaser or DES. MANDATORY Fully Meets 3.5 Cert. EMPLOYEE CERTIFICATION/TRAINING. Any person working on the installation or maintenance of purchaser-owned equipment must be manufacturer-certified by the equipment manufacturer, to maintain a manufacturer warrantied solution. Manufacturer Certification is defined as attendance and successful completion of certification-requirement training within a manufacturer’s program. Any person working on the installation or maintenance of purchaser-owned equipment that does NOT have a new or existing manufacturer warranty, must be international professional telecommunications society certified [ex. Bicsi (Building Industry Consulting Services International), TIA (Telecommunications Industry Association), ETA International, FOA (The Fiber Optic Association)]. Certificates for all persons working on the installation or maintenance of purchaser- owned equipment must be submitted to Purchaser with a quote or Statement of Work (SOW) BEFORE starting any work. Written Response Required. MANDATORY SCORED Fully Meets ▇▇▇▇▇▇▇, Inc. continually maintains Interwest Communications has met the required employee certification training and requirements. 3.6 Cert. FIBER OPTIC CERTIFICATION. Please describe any certification/training by the Fiber Optic Association (FOA) or any qualified Industry training certification organization(s) specifically for fiber-optic or premises cabling. Written Response Required. Attach copies of any Fiber Optic or premises certifications. HIGHLY DESIRABLE Fully Meets ▇▇▇▇▇▇▇, Inc. is Corning, Panduit, Systimax and Leviton/▇▇▇▇-Tek Superior Essex fiber optic certified. ▇▇▇▇▇▇▇, Inc. continually trains our fiber optic technicians through Light Brigade. 4.0 Lic & Staff LICENSING AND STAFFING: 4.1 Lic & Staff. PROJECT MANAGER: Bidder must assign a project manager requirements to qualify for each Purchaser project. Purchaser must have approval rights over the project manager, or any replacements thereof. The project manager must be the principal point of contact for Purchaser and must coordinate Biddermanufacturer’s activities. The project manager must produce and maintain a complete plan for all Bidder-related activities concerning the Purchaser’s order document/statement of work. Written Response Required. Provide the name(s) and a brief description of experience for key personnel who might perform the job of Bidder Project Manager. MANDATORY SCORED Fully Meets ▇▇▇▇▇ ▇▇▇▇▇ has 25 years in contruction trades, with 14 years in the electrical field. He maintains two electrical licenses, EL02 and EL06. Caleb has been with ▇▇▇▇▇▇▇ for 11 years. He spent four years in the field as a ▇▇▇▇▇▇▇/GF before becoming a Project Manager and leading our Service Department. 4.2 Lic & Staff. ELECTRICIANS. Bidder must have employed staff or subcontractors that meet the Licensed Electricians licensing requirements of chapter 19.28 RCW. MANDATORY Fully Meets 4.3 Lic & Staff. ELECTRICIANS. Bidder must have at least one (1) employed staff or subcontractor that holds certificates of competency as at least a Journey Level Electrician per requirements of RCW 19.28.161. Written Response Required. Provide the name(s) of any such person(s) and photocopy(s) of certificate(s). MANDATORY SCORED Fully Meets • ▇▇▇▇▇▇▇, Inc. has a dedicated team supporting our Technologies group. ▇▇▇▇▇ ▇▇▇▇▇ (EL06), ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇ ▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇▇ ▇'▇▇▇▇▇ (EL01) 4.4 Lic & Staff. REGISTERED COMMUNICATIONS DISTRIBUTION DESIGNERS. Bidder must maintain one or more full- time Registered Communications Distribution Designers (RCDD) on staff. A subcontractor cannot fulfill this requirement. Written Response Required. List Name of RCDD, status (part-time, or full-time) and years of experience. Describe a job where an RCDD provided a design for your business in Exhibit D1 Work History by Region. Attach photocopies of all certificates for RCDD(s). HIGHLY DESIRABLE Fully Meets ▇▇▇▇ ▇▇▇▇▇▇▇ holds an active RCDD and is employed full time ▇▇▇▇▇▇▇, Inc. Josh has 21 years of experience in telecommunications field. Josh provided the design at ▇▇▇▇▇▇▇, Inc.'s Bellevue College projectcertification programs.
Appears in 1 contract
Sources: Master Contract
Standards Compliance. 2.1 Stds. Comp. All work and materials covered by this Solicitation and resulting Master Contract(s) shall be performed in compliance with Chapter 19.28.410 Revised Code of Washington, Chapter 296-46B-010 Washington Administrative Code, and the most current versions of the following mandatory standards: • NFPA-70 National Electrical Code • ANSI\TIA\EIA 568 series, Commercial Building Telecommunications Cabling Standard • ANSI\TIA\EIA 569-E , Commercial Building Standard for Telecommunications Pathways and Spaces, o Ex. Pathways, Work area outlets, Patch panels, Racks and cabinets, Ports, Grounding, busbars, Cabling, Firestop locations, Telecommunications space, Data center room grid • ANSI\TIA\EIA 606-C Commercial Building Telecommunication standard for Labeling • ANSI-J-STD-607-C, Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications • ANSI\EIA\TIA 862-B Structured Cabling infrastructure Standard for Intelligent building Systems (Building Automation standard) • ANSI\EIA\TIA 942-B Telecommunications standard for Data centers • OSHA/WISHA Construction and safety standards Any additional codes/standards required under a Purchaser’s Purchase Order/SOW or by state or federal regulation. Bidder will be held responsible for compliance with the most recent versions of the specified codes/standards/regulations and any revisions or updates. Should conflicts arise with the foregoing, the Department of Enterprise Services will have responsibility for making final interpretation. MANDATORY Fully Meets 3.0 Cert. CERTIFICATION: 3.1 Cert. COMPANY CERTIFICATIONS. Bidder must maintain certification from the Manufacturer(s) that provides structured cabling system twenty-five (25) year or more warranties as identified in Bidder’s response to this RFQQ. Written Response Required. List the Manufacturer(s) Certifications you maintain that meet this requirement. MANDATORY SCORED ▇▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution Provider, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, Ortronics/Superior Essex Certified Installer Commscope and Corning Preferred InstallerOrtronics certificiations attached. 3.2 Cert. COMPANY CERTIFICATIONS. The Bidder response must provide documentation that the company is certified by at least one (1) manufacturer that provides structured cabling-system 20-year-or-more warranties in Washington state. For example: • Commscope (Systimax) Ortronics, Inc. (Certified Installer-Plus Program); • AMP (Netconnect Design and Installation Program); • Leviton (Certified Cabling System); • Belden ▇▇▇▇▇▇ (IBDN). These manufacturers are examples only – the list is not all-inclusive. Written Response Required. Bidder must identify the certified warranty manufacturer and provide a photocopy of said certification(s).If Bidder has more than one manufacturer certification, please submit any additional certifications. MANDATORY SCORED ▇▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution Provider, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, Ortronics/Super Essex Certified Installer Commscope and Corning Preferred Installer. Ortronics certificiations attached 3.3 Cert. COMPANY CERTIFICATIONS. Bidder must have employed staff or subcontractors that meet the certification criteria for installation for each Manufacturer upon which award of this Master Contract is predicated. MANDATORY Fully Meets 3.4 Cert. COMPANY CERTIFICATIONS. Bidder installation personnel that work onsite must have International, or Manufacturer certification in accordance with industry standards and best practice methodologies and must be proficient with the installation and termination of all equipment that is to be installed onsite. Upon request Bidder will furnish a copy of such certification to Purchaser or DES. MANDATORY Fully Meets 3.5 Cert. EMPLOYEE CERTIFICATION/TRAINING. Any person working on the installation or maintenance of purchaser-owned equipment must be manufacturer-certified by the equipment manufacturer, to maintain a manufacturer warrantied solution. Manufacturer Certification is defined as attendance and successful completion of certification-requirement training within a manufacturer’s program. Any person working on the installation or maintenance of purchaser-owned equipment that does NOT have a new or existing manufacturer warranty, must be international professional telecommunications society certified [ex. Bicsi (Building Industry Consulting Services International), TIA (Telecommunications Industry Association), ETA International, FOA (The Fiber Optic Association)]. Certificates for all persons working on the installation or maintenance of purchaser- owned equipment must be submitted to Purchaser with a quote or Statement of Work (SOW) BEFORE starting any work. Written Response Required. MANDATORY SCORED Fully Meets ▇▇▇▇▇▇▇, Inc. continually maintains employee certification training Commscope and requirements. Ortronics certificiations attached 3.6 Cert. FIBER OPTIC CERTIFICATION. Please describe any certification/training by the Fiber Optic Association (FOA) or any qualified Industry training certification organization(s) specifically for fiber-optic or premises cabling. Written Response Required. Attach copies of any Fiber Optic or premises certifications. HIGHLY DESIRABLE Fully Meets ▇▇▇▇▇▇▇, Inc. is Corning, Panduit, Systimax and Leviton/▇▇▇▇-Tek Superior Essex fiber optic certified. ▇▇▇▇▇▇▇, Inc. continually trains our fiber optic technicians through Light BrigadeCommscope certificate provided upon request. 4.0 Lic & Staff LICENSING AND STAFFING: 4.1 Lic & Staff. PROJECT MANAGER: Bidder must assign a project manager for each Purchaser project. Purchaser must have approval rights over the project manager, or any replacements thereof. The project manager must be the principal point of contact for Purchaser and must coordinate Bidder’s activities. The project manager must produce and maintain a complete plan for all Bidder-related activities concerning the Purchaser’s order document/statement of work. Written Response Required. Provide the name(s) and a brief description of experience for key personnel who might perform the job of Bidder Project Manager. MANDATORY SCORED Fully Meets ▇▇▇▇▇ ▇▇▇▇▇▇ - ▇▇▇▇▇ has 25 over 30 years in contruction trades, with 14 years of experience in the electrical fieldstructured cabling industry. He maintains two electrical licensesProjects include both inside and outside plant (fiber and copper infrastructure), EL02 DAS PS/Cell, CATV and EL06Campus WiFi indoor/outdoor. Caleb ▇▇▇▇ ▇▇▇▇ - Matt has been with 26 years experience in installation, estimating and project managing inside cabling, outside plant backbone cabling, wiress access points and network equipment. ▇▇▇▇▇▇ ▇▇▇▇▇▇▇ for 11 years- Outside Plant Specility. He spent four years in the field as a ▇▇▇▇▇▇▇/GF before becoming a Project Manager ▇ has over 40 years experiance in both underground and leading our Service Departmentaerial plant placement for communications infrstructure including the coordination of fiber optic fusion splicing and termination, copper splicing and required protective termination, and all bonding and grounding requirements. 4.2 Lic & Staff. ELECTRICIANS. Bidder must have employed staff or subcontractors that meet the Licensed Electricians licensing requirements of chapter 19.28 RCW. MANDATORY Fully Meets 4.3 Lic & Staff. ELECTRICIANS. Bidder must have at least one (1) employed staff or subcontractor that holds certificates of competency as at least a Journey Level Electrician per requirements of RCW 19.28.161. Written Response Required. Provide the name(s) of any such person(s) and photocopy(s) of certificate(s). MANDATORY SCORED Fully Meets • ▇▇▇▇▇▇▇, Inc. has a dedicated team supporting our Technologies group. ▇o ▇▇▇▇ ▇▇▇▇▇ (EL06), ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇ ▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇▇ ▇'▇▇▇▇▇ (EL01Employee) 4.4 Lic & Staff. REGISTERED COMMUNICATIONS DISTRIBUTION DESIGNERS. Bidder must maintain one or more full- time Registered Communications Distribution Designers (RCDD) on staff. A subcontractor cannot fulfill this requirement. Written Response Required. List Name of RCDD, status (part-time, or full-time) and years of experience. Describe a job where an RCDD provided a design for your business in Exhibit D1 Work History by Region. Attach photocopies of all certificates for RCDD(s). HIGHLY DESIRABLE Does Not Meet The RCDD that Milne Electric Inc had in employment has recently retired and we currently have a Project Manager studying the BICSI 14th Edition Telecommunications Distribution Methods Manual and we currently have him scheduled to take the RCDD exam and certification by the 4th quarter of 2021. 4.5 Lic & Staff. TELECOMMUNICATIONS ADMINISTRATORS. Bidder must employ at least one (1) individual who possesses a Telecommunications Administrator certificate that meets the requirements of RCW 19.28.430. Written Response Required. Provide the name of such person(s) and photocopy(s) of certificate(s). HIGHLY DESIRABLE Fully Meets ▇▇▇▇ ▇▇▇▇▇▇▇ holds * 5.0 Ungd & Aerial (OUT) UNDERGROUND AND AERIAL EXPERTISE – OUTSIDE CATEGORY ONLY: * 5.1 Ungd & Aerial Bidders must employ staff or subcontractors with expertise and equipment to conduct outside plant projects that are underground or aerial. Written Response Required. Provide a list of key outside plant employees or subcontractors and a brief description of their experience with outside plant projects. MANDATORY SCORED Fully Meets Northwest Utilities (NWU) Contractor - NWU have been in operation since 1949 working for all major communication utilities to install, maintain and upgrade underground infrastructureDiversified Northwest Contractor - Diversified supports both the instalation, maintenance and rearrangement of aerial plant Diversified also has direction bore equipment for the installation of 6", 4" and 2" HDPE pipe. 6.0 PO/SOW PURCHASE ORDERS/ STATEMENT OF WORK (SOW) 6.1 PO/SOW ORDERING REQUIREMENTS. Eligible Purchasers shall order goods and/or services from any resulting Master Contract, consistent with the terms hereof and by using any ordering mechanism agreeable both to Bidder and Purchaser but, at a minimum, including the use of a Purchase Order, or Statement of Work (SOW). When practicable, Bidder and Purchaser also shall use telephone orders, email orders, web-based orders, and similar procurement methods (collectively “Purchaser Order”). All order documents must reference the Master Contract number. The terms of any resulting Master Contract shall apply to any Purchase Order or SOW and, in the event of any conflict, the terms of the resulting Master Contract shall prevail. Notwithstanding any provision to the contrary, in no event shall any ‘click-agreement,’ software or web-based application terms and conditions, or other agreement modify the terms and conditions of any resulting Master Contract. MANDATORY Fully Meets 6.2 PO/SOW PURCHASE ORDERS/STATEMENT OF WORK (SOW). Bidder shall, in accordance with all terms and conditions of this Master Contract, fully perform and shall be obligated to comply with all Purchase Orders/SOW received by the Bidder prior to the expiration hereof, unless otherwise directed in writing by the Contract Administrator, including, without limitation, all Purchase Orders/SOW received prior to but not fully performed and satisfied at the expiration of this Contract. MANDATORY Fully Meets 6.3 PO/SOW CHANGE ORDERS: All modifications, additions or revisions to the Purchase Order/SOW MUST be agreed to, and must be approved by Purchaser in writing before proceeding with any additions or revisions to services or materials provided by Bidder. MANDATORY Fully Meets 7.0 Ste Seq & Access SITE SECURITY AND ACCESS: 7.1 Ste Seq & Access While on Purchaser’s premises, Bidder, its agents, employees, or subcontractors must conform in all respects with physical, fire, and security regulations. Bidder understands that all Purchaser’s building entrances are controlled for access. Bidder agrees to become familiar with Purchaser’s building and security policies, and further agrees to observe and comply with all Purchaser’s building and security policies or procedures. Bidder understands that in order to obtain access to Purchaser’s premises, Bidder must be issued a security badge by Purchaser. Bidder must provide certain personal information, including valid government issued photo identification, prior to obtaining a security badge. Bidder further understands that Purchaser will collect and retain such personal information for so long as the contract is in effect and such individual(s) has access to the premises. Purchaser reserves the right to deny an active RCDD application for a security badge. Failure of Bidder to comply with Purchaser’s security and safety policies and procedures is employed full time ▇▇▇▇▇▇▇sufficient grounds for revoking, Inc. Josh has 21 years modifying, suspending or terminating access to Purchaser’s facilities. MANDATORY Fully Meets 8.0 Ship & Risk of experience in telecommunications fieldLoss SHIPPING AND RISK OF LOSS: 8.1 Ship & Risk of Loss SHIPPING. Josh provided Bidder must ship all materials purchased pursuant to this Contract, freight prepaid, FOB Purchaser’s destination. The method of shipment must be consistent with the design at ▇▇▇▇▇▇▇nature of the materials and hazards of transportation. MANDATORY Fully Meets 8.2 Ship & Risk of Loss RISK OF LOSS. Regardless of FOB point, Inc.'s Bellevue College project.Bidder agrees to bear all risks of loss, damage, or destruction of the materials ordered hereunder that occurs prior to Acceptance, except loss or damage attributable to Purchaser’s fault or negligence; and such loss, damage, or destruction must not release Bidder from any obligation hereunder. After Acceptance, the risk of loss or damage must be borne by Purchaser, except loss or damage attributable to Bidder’s fault or negligence. MANDATORY Fully Meets 9.0 Const. Coord. CONSTRUCTION COORDINATION: 9.1
Appears in 1 contract
Sources: Master Contract
Standards Compliance. 2.1 Stds. Comp. All work and materials covered by this Solicitation and resulting Master Contract(s) shall be performed in compliance with Chapter 19.28.410 Revised Code of Washington, Chapter 296-46B-010 Washington Administrative Code, and the most current versions of the following mandatory standards: • NFPA-70 National Electrical Code • ANSI\TIA\EIA 568 series, Commercial Building Telecommunications Cabling Standard • ANSI\TIA\EIA 569-E , Commercial Building Standard for Telecommunications Pathways and Spaces, o Ex. Pathways, Work area outlets, Patch panels, Racks and cabinets, Ports, Grounding, busbars, Cabling, Firestop locations, Telecommunications space, Data center room grid • ANSI\TIA\EIA 606-C Commercial Building Telecommunication standard for Labeling • ANSI-J-STD-607-C, Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications • ANSI\EIA\TIA 862-B Structured Cabling infrastructure Standard for Intelligent building Systems (Building Automation standard) • ANSI\EIA\TIA 942-B Telecommunications standard for Data centers • OSHA/WISHA Construction and safety standards Any additional codes/standards required under a Purchaser’s Purchase Order/SOW or by state or federal regulation. Bidder will be held responsible for compliance with the most recent versions of the specified codes/standards/regulations and any revisions or updates. Should conflicts arise with the foregoing, the Department of Enterprise Services will have responsibility for making final interpretation. MANDATORY Fully Meets FULLY MEETS 3.0 Cert. CERTIFICATION: 3.1 Cert. COMPANY CERTIFICATIONS. Bidder must maintain certification from the Manufacturer(s) that provides structured cabling system twenty-five (25) year or more warranties as identified in Bidder’s response to this RFQQ. Written Response Required. List the Manufacturer(s) Certifications you maintain that meet this requirement. MANDATORY SCORED ▇FULLY MEETS Legrand, Panduit, OCC, ▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution ProviderLeviton Premier, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, Ortronics/Superior Essex Certified Installer and Corning Preferred Installer. Hubble For Manufacturer Certifications see Attachment B 3.2 Cert. COMPANY CERTIFICATIONS. The Bidder response must provide documentation that the company is certified by at least one (1) manufacturer that provides structured cabling-system 20-year-or-more warranties in Washington state. For example: • Commscope (Systimax) Ortronics, Inc. (Certified Installer-Plus Program); • AMP (Netconnect Design and Installation Program); • Leviton (Certified Cabling System); • Belden ▇▇▇▇▇▇ (IBDN). These manufacturers are examples only – the list is not all-inclusive. Written Response Required. Bidder must identify the certified warranty manufacturer and provide a photocopy of said certification(s).If Bidder has more than one manufacturer certification, please submit any additional certifications. MANDATORY SCORED ▇FULLY MEETS All warranty periods are Lifetime or 25 years Legrand, Panduit, OCC, ▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution ProviderLeviton Premier, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, Ortronics/Super Essex Certified Installer and Corning Preferred Installer. Hubble For Manufacturer Certifications see Attachment B 3.3 Cert. COMPANY CERTIFICATIONS. Bidder must have employed staff or subcontractors that meet the certification criteria for installation for each Manufacturer upon which award of this Master Contract is predicated. MANDATORY Fully Meets FULLY MEETS 3.4 Cert. COMPANY CERTIFICATIONS. Bidder installation personnel that work onsite must have International, or Manufacturer certification in accordance with industry standards and best practice methodologies and must be proficient with the installation and termination of all equipment that is to be installed onsite. Upon request Bidder will furnish a copy of such certification to Purchaser or DES. MANDATORY Fully Meets FULLY MEETS 3.5 Cert. EMPLOYEE CERTIFICATION/TRAINING. Any person working on the installation or maintenance of purchaser-owned equipment must be manufacturer-manufacturer- certified by the equipment manufacturer, to maintain a manufacturer warrantied solution. Manufacturer Certification is defined as attendance and successful completion of certification-requirement training within a manufacturer’s program. Any person working on the installation or maintenance of purchaser-owned equipment that does NOT have a new or existing manufacturer warranty, must be international professional telecommunications society certified [ex. Bicsi (Building Industry Consulting Services International), TIA (Telecommunications Industry Association), ETA International, FOA (The Fiber Optic Association)]. Certificates for all persons working on the installation or maintenance of purchaser- purchaser-owned equipment must be submitted to Purchaser with a quote or Statement of Work (SOW) BEFORE starting any work. Written Response Required. MANDATORY SCORED Fully Meets ▇▇▇▇▇▇▇, Inc. continually maintains employee certification training and requirementsFULLY MEETS ITG employs staff who are certified through multiple manufacturer programs. Copies of applicable certificates will be provided to the Purchaser with a quote or Statement of Work based upon manufacturer information provided by the Purchaser. 3.6 Cert. FIBER OPTIC CERTIFICATION. Please describe any certification/training by the Fiber Optic Association (FOA) or any qualified Industry training certification organization(s) specifically for fiber-optic or premises cabling. Written Response Required. Attach copies of any Fiber Optic or premises certifications. HIGHLY DESIRABLE Fully Meets FULLY MEETS ITG employs staff who are certified in Fiber-Optic cabling. Certificates for ▇▇▇▇ ▇▇▇▇▇▇▇, Inc. is Corning, Panduit, Systimax and Leviton/▇▇▇▇-Tek Superior Essex fiber optic certified. ▇▇ ▇▇▇▇▇▇, Inc. continually trains our fiber optic technicians through Light Brigade. and ▇▇▇▇▇▇ McLaren are included as Attachment C 4.0 Lic & Staff LICENSING AND STAFFING: 4.1 Lic & Staff. PROJECT MANAGER: Bidder must assign a project manager for each Purchaser project. Purchaser must have approval rights over the project manager, or any replacements thereof. The project manager must be the principal point of contact for Purchaser and must coordinate Bidder’s activities. The project manager must produce and maintain a complete plan for all Bidder-related activities concerning the Purchaser’s order document/statement of work. Written Response Required. Provide the name(s) and a brief description of experience for key personnel who might perform the job of Bidder Project Manager. MANDATORY SCORED Fully Meets FULLY MEETS ▇▇▇▇ ▇▇▇▇▇▇▇▇▇ has 29 years of experience in the Telecommunications industry. A seasoned Project Manager, he is a licensed O6 Limited Energy Electrician. Josh has excellent communication skills and a focus on Customer Satisfaction. ▇▇▇▇▇ ▇▇▇▇▇▇ has 25 years in contruction trades, with 14 years of experience in the electrical fieldTelecommunications industry. He maintains two electrical licenses, EL02 and EL06currently oversees our projects at hte University of Washington campus. Caleb has been with ▇▇▇▇▇▇▇ for 11 years. He spent four years is a BICSI registered technician and is skilled in the field as a ▇▇▇▇▇▇▇/GF before becoming a Project Manager and leading our Service Departmentfiber fusion splicing. 4.2 Lic & Staff. ELECTRICIANS. Bidder must have employed staff or subcontractors that meet the Licensed Electricians licensing requirements of chapter 19.28 RCW. MANDATORY Fully Meets FULLY MEETS 4.3 Lic & Staff. ELECTRICIANS. Bidder must have at least one (1) employed staff or subcontractor that holds certificates of competency as at least a Journey Level Electrician per requirements of RCW 19.28.161. Written Response Required. Provide the name(s) of any such person(s) and photocopy(s) of certificate(s). MANDATORY SCORED Fully Meets • FULLY MEETS ITG subcontracts with ▇▇▇▇▇▇ Electric. Journey Level licensed electricians employed by ▇▇▇▇▇▇ Electric include ▇▇▇▇ ▇▇▇▇▇▇, Inc. has a dedicated team supporting our Technologies group. ▇▇▇▇▇ ▇▇▇▇▇▇ (EL06), ▇and ▇▇▇▇▇ ▇▇▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇ ▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇▇ ▇'▇▇▇▇▇ (EL01) . Current licenses are included as Attachment D 4.4 Lic & Staff. REGISTERED COMMUNICATIONS DISTRIBUTION DESIGNERS. Bidder must maintain one or more full- full-time Registered Communications Distribution Designers (RCDD) on staff. A subcontractor cannot fulfill this requirement. Written Response Required. List Name of RCDD, status (part-time, or full-time) and years of experience. Describe a job where an RCDD provided a design for your business in Exhibit D1 Work History by Region. Attach photocopies of all certificates for RCDD(s). HIGHLY DESIRABLE Fully Meets FULLY MEETS ▇▇▇▇ ▇▇▇▇▇▇▇ holds an active , RCDD and has 30+ years of experience. He is employed full time by ITG. ▇▇▇▇ ▇▇▇▇▇▇▇, Inc. Josh RCDD has 21 30+ years of experience experience. She is employed part time by ITG. A description of a job where an RCDD provided design is included in telecommunications fieldExhibit D1 Work History Copies of current RCDD certificates are included as Attachment E 4.5 Lic & Staff. Josh provided TELECOMMUNICATIONS ADMINISTRATORS. Bidder must employ at least one (1) individual who possesses a Telecommunications Administrator certificate that meets the design at requirements of RCW 19.28.430. Written Response Required. Provide the name of such person(s) and photocopy(s) of certificate(s). HIGHLY DESIRABLE FULLY MEETS ▇▇▇▇ ▇▇▇▇▇▇▇, Inc.'s Bellevue College project.▇ holds a current Telecommunications Administrator certificate. A copy of the certificate is included as Attachment F
Appears in 1 contract
Sources: Master Contract
Standards Compliance. 2.1 Stds. Comp. All work and materials covered by this Solicitation and resulting Master Contract(s) shall be performed in compliance with Chapter 19.28.410 Revised Code of Washington, Chapter 296-46B-010 Washington Administrative Code, and the most current versions of the following mandatory standards: • NFPA-70 National Electrical Code • ANSI\TIA\EIA 568 series, Commercial Building Telecommunications Cabling Standard • ANSI\TIA\EIA 569-E , Commercial Building Standard for Telecommunications Pathways and Spaces, o Ex. Pathways, Work area outlets, Patch panels, Racks and cabinets, Ports, Grounding, busbars, Cabling, Firestop locations, Telecommunications space, Data center room grid • ANSI\TIA\EIA 606-C Commercial Building Telecommunication standard for Labeling • ANSI-J-STD-607-C, Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications • ANSI\EIA\TIA 862-B Structured Cabling infrastructure Standard for Intelligent building Systems (Building Automation standard) • ANSI\EIA\TIA 942-B Telecommunications standard for Data centers • OSHA/WISHA Construction and safety standards Any additional codes/standards required under a Purchaser’s Purchase Order/SOW or by state or federal regulation. Bidder will be held responsible for compliance with the most recent versions of the specified codes/standards/regulations and any revisions or updates. Should conflicts arise with the foregoing, the Department of Enterprise Services will have responsibility for making final interpretation. MANDATORY Fully Meets 3.0 Cert. CERTIFICATION: 3.1 Cert. COMPANY CERTIFICATIONS. Bidder must maintain certification from the Manufacturer(s) that provides structured cabling system twenty-five (25) year or more warranties as identified in Bidder’s response to this RFQQ. Written Response Required. List the Manufacturer(s) Certifications you maintain that meet this requirement. MANDATORY SCORED Fully Meets ▇▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution Provider, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, Ortronics/Superior Essex Certified Installer -Copper and Corning Preferred Installer. Optical Fiber Communications cabling systems-Limited lifetime system Warranty 3.2 Cert. COMPANY CERTIFICATIONS. The Bidder response must provide documentation that the company is certified by at least one (1) manufacturer that provides structured cabling-system 20-year-or-more warranties in Washington state. For example: • Commscope (Systimax) Ortronics, Inc. (Certified Installer-Plus Program); • AMP (Netconnect Design and Installation Program); • Leviton (Certified Cabling System); • Belden ▇▇▇▇▇▇ (IBDN). These manufacturers are examples only – the list is not all-inclusive. Written Response Required. Bidder must identify the certified warranty manufacturer and provide a photocopy of said certification(s).If Bidder has more than one manufacturer certification, please submit any additional certifications. MANDATORY SCORED ▇▇▇▇▇▇▇, Inc. is a CommScope Uniprise/Systimax Solution Provider, Silver Panduit Certified Installer, Fully Meets Leviton/▇▇▇▇-Tek Premier Network Installer, ▇▇▇▇▇▇ Certified Installer, Ortronics/Super Essex Certified Installer 1. Leviton-Copper and Corning Preferred InstallerOptical Fiber Communications cabling systems-Limited lifetime system Warranty. 2. Sumitomo FutureFLEX Air-Blown Fiber solution 3.3 Cert. COMPANY CERTIFICATIONS. Bidder must have employed staff or subcontractors that meet the certification criteria for installation for each Manufacturer upon which award of this Master Contract is predicated. MANDATORY Fully Meets 3.4 Cert. COMPANY CERTIFICATIONS. Bidder installation personnel that work onsite must have International, or Manufacturer certification in accordance with industry standards and best practice methodologies and must be proficient with the installation and termination of all equipment that is to be installed onsite. Upon request Bidder will furnish a copy of such certification to Purchaser or DES. MANDATORY Fully Meets 3.5 Cert. EMPLOYEE CERTIFICATION/TRAINING. Any person working on the installation or maintenance of purchaser-owned equipment must be manufacturer-certified by the equipment manufacturer, to maintain a manufacturer warrantied solution. Manufacturer Certification is defined as attendance and successful completion of certification-requirement training within a manufacturer’s program. Any person working on the installation or maintenance of purchaser-owned equipment that does NOT have a new or existing manufacturer warranty, must be international professional telecommunications society certified [ex. Bicsi (Building Industry Consulting Services International), TIA (Telecommunications Industry Association), ETA International, FOA (The Fiber Optic Association)]. Certificates for all persons working on the installation or maintenance of purchaser- owned equipment must be submitted to Purchaser with a quote or Statement of Work (SOW) BEFORE starting any work. Written Response Required. MANDATORY SCORED Fully Meets ▇▇▇▇▇▇▇, Inc. continually maintains employee certification training -Copper and requirements. Optical Fiber Communications cabling systems 3.6 Cert. FIBER OPTIC CERTIFICATION. Please describe any certification/training by the Fiber Optic Association (FOA) or any qualified Industry training certification organization(s) specifically for fiber-optic or premises cabling. Written Response Required. Attach copies of any Fiber Optic or premises certifications. HIGHLY DESIRABLE Fully Meets ▇▇▇▇▇▇▇, Inc. is Corning, Panduit, Systimax 1. Leviton-Copper and Leviton/▇▇▇▇-Tek Superior Essex fiber optic certifiedOptical Fiber Communications cabling systems. ▇▇▇▇▇▇▇, Inc. continually trains our fiber optic technicians through Light Brigade2. Sumitomo FutureFLEX Air-Blown Fiber solution 4.0 Lic & Staff LICENSING AND STAFFING: 4.1 Lic & Staff. PROJECT MANAGER: Bidder ▇▇▇▇▇▇ must assign a project manager for each Purchaser project. Purchaser must have approval rights over the project manager, or any replacements thereof. The project manager must be the principal point of contact for Purchaser and must coordinate Bidder’s activities. The project manager must produce and maintain a complete plan for all Bidder-related activities concerning the Purchaser’s order document/statement of work. Written Response Required. Provide the name(s) and a brief description of experience for key personnel who might perform the job of Bidder Project Manager. MANDATORY SCORED Fully Meets ▇▇▇▇ ▇▇▇▇ (30 yrs), ▇▇▇▇ ▇▇▇▇▇ has (25 years in contruction tradesyrs), with 14 years in the electrical field. He maintains two electrical licenses, EL02 and EL06. Caleb has been with ▇▇▇▇▇▇▇ for 11 years. He spent four years in the field as a ▇▇▇▇▇▇▇/GF before becoming ▇ (17 years)-Each individual Estimates & Project Manages multiple projects at a Project Manager time and leading our Service Departmentsees the projects through to completion. 4.2 Lic & Staff. ELECTRICIANS. Bidder must have employed staff or subcontractors that meet the Licensed Electricians licensing requirements of chapter 19.28 RCW. MANDATORY Fully Meets 4.3 Lic & Staff. ELECTRICIANS. Bidder must have at least one (1) employed staff or subcontractor that holds certificates of competency as at least a Journey Level Electrician per requirements of RCW 19.28.161. Written Response Required. Provide the name(s) of any such person(s) and photocopy(s) of certificate(s). MANDATORY SCORED Fully Meets • ▇▇▇▇▇▇▇, Inc. has a dedicated team supporting our Technologies group. ▇▇▇▇▇ ▇▇▇▇▇ (EL06), ▇▇o ▇▇▇▇ ▇▇▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇ ▇▇▇▇▇ (EL06) ▇▇▇ ▇▇▇▇▇▇ (EL06) ▇▇▇▇ ▇▇▇▇▇▇▇ (EL06) ▇▇▇▇▇▇▇ ▇'▇▇▇▇▇ (EL01-(01 Electrician JENREGM956JE) 4.4 Lic & Staff. REGISTERED COMMUNICATIONS DISTRIBUTION DESIGNERS. Bidder must maintain one or more full- time Registered Communications Distribution Designers (RCDD) on staff. A subcontractor cannot fulfill this requirement. Written Response Required. List Name of RCDD, status (part-time, or full-time) and years of experience. Describe a job where an RCDD provided a design for your business in Exhibit D1 Work History by Region. Attach photocopies of all certificates for RCDD(s). HIGHLY DESIRABLE Fully Meets ▇▇▇▇ ▇▇▇▇▇▇▇ holds an active RCDD and is employed full time ▇. ▇▇▇▇▇▇▇▇, Inc. Josh has 21 years RCDD in good standing since 2006, Full Time-Operations Director. 4.5 Lic & Staff. TELECOMMUNICATIONS ADMINISTRATORS. Bidder must employ at least one (1) individual who possesses a Telecommunications Administrator certificate that meets the requirements of RCW 19.28.430. Written Response Required. Provide the name of such person(s) and photocopy(s) of certificate(s). HIGHLY DESIRABLE Fully Meets ▇▇▇▇ ▇▇▇▇▇▇ (AD06) * 5.0 Ungd & Aerial (OUT) UNDERGROUND AND AERIAL EXPERTISE – OUTSIDE CATEGORY ONLY: * 5.1 Ungd & Aerial Bidders must employ staff or subcontractors with expertise and equipment to conduct outside plant projects that are underground or aerial. Written Response Required. Provide a list of key outside plant employees or subcontractors and a brief description of their experience with outside plant projects. MANDATORY SCORED Written Response Required. 6.0 PO/SOW PURCHASE ORDERS/ STATEMENT OF WORK (SOW) 6.1 PO/SOW ORDERING REQUIREMENTS. Eligible Purchasers shall order goods and/or services from any resulting Master Contract, consistent with the terms hereof and by using any ordering mechanism agreeable both to Bidder and Purchaser but, at a minimum, including the use of a Purchase Order, or Statement of Work (SOW). When practicable, Bidder and Purchaser also shall use telephone orders, email orders, web-based orders, and similar procurement methods (collectively “Purchaser Order”). All order documents must reference the Master Contract number. The terms of any resulting Master Contract shall apply to any Purchase Order or SOW and, in telecommunications fieldthe event of any conflict, the terms of the resulting Master Contract shall prevail. Josh Notwithstanding any provision to the contrary, in no event shall any ‘click-agreement,’ software or web-based application terms and conditions, or other agreement modify the terms and conditions of any resulting Master Contract. MANDATORY Fully Meets 6.2 PO/SOW PURCHASE ORDERS/STATEMENT OF WORK (SOW). Bidder shall, in accordance with all terms and conditions of this Master Contract, fully perform and shall be obligated to comply with all Purchase Orders/SOW received by the Bidder prior to the expiration hereof, unless otherwise directed in writing by the Contract Administrator, including, without limitation, all Purchase Orders/SOW received prior to but not fully performed and satisfied at the expiration of this Contract. MANDATORY Fully Meets 6.3 PO/SOW CHANGE ORDERS: All modifications, additions or revisions to the Purchase Order/SOW MUST be agreed to, and must be approved by Purchaser in writing before proceeding with any additions or revisions to services or materials provided the design at by Bidder. MANDATORY Fully Meets 7.0 Ste Seq & Access SITE SECURITY AND ACCESS: 7.1 Ste Seq & Access While on Purchaser’s premises, Bidder, its agents, employees, or subcontractors must conform in all respects with physical, fire, and security regulations. Bidder understands that all Purchaser’s building entrances are controlled for access. ▇▇▇▇▇▇ agrees to become familiar with ▇▇▇▇▇▇▇▇▇’s building and security policies, Inc.'s Bellevue College project.and further agrees to observe and comply with all Purchaser’s building and security policies or procedures. Bidder understands that in order to obtain access to Purchaser’s premises, Bidder must be issued a security badge by Purchaser. Bidder must provide certain personal information, including valid government issued photo identification, prior to obtaining a security badge. Bidder further understands that Purchaser will collect and retain such personal information for so long as the contract is in effect and such individual(s) has access to the premises. Purchaser reserves the right to deny an application for a security badge. Failure of Bidder to comply with Purchaser’s security and safety policies and procedures is sufficient grounds for revoking, modifying, suspending or terminating access to Purchaser’s facilities. MANDATORY Fully Meets 8.0 Ship & Risk of Loss SHIPPING AND RISK OF LOSS: 8.1 Ship & Risk of Loss SHIPPING. Bidder must ship all materials purchased pursuant to this Contract, freight prepaid, FOB Purchaser’s destination. The method of shipment must be consistent with the nature of the materials and hazards of transportation. MANDATORY Fully Meets 8.2 Ship & Risk of Loss RISK OF LOSS. Regardless of FOB point, ▇▇▇▇▇▇ agrees to bear all risks of loss, damage, or destruction of the materials ordered hereunder that occurs prior to Acceptance, except loss or damage attributable to Purchaser’s fault or negligence; and such loss, damage, or destruction must not release Bidder from any obligation hereunder. After Acceptance, the risk of loss or damage must be borne by Purchaser, except loss or damage attributable to Bidder’s fault or negligence. MANDATORY Fully Meets 9.0 Const. Coord. CONSTRUCTION COORDINATION: 9.1
Appears in 1 contract
Sources: Master Contract