Substitute Operator if Operator Fails to Commence Drilling Operations) Sample Clauses

Substitute Operator if Operator Fails to Commence Drilling Operations). Within _________ (__) days of the selection of the substitute Operator, the substitute Operator shall propose the drilling of an identical Development Well (except for any necessary modifications resulting from a change in the drilling rig to be utilized by the substitute Operator), and it shall commence drilling operations on that well within _________ (___) days after the end of the period for the approval of that Well. If a Party submits an identical Development Well proposal (except for any necessary modifications resulting from a change in the drilling rig to be utilized by the Operator) within _______ (__) days after the deemed withdrawal of the approved original Development Well proposal and if that identical Development Well proposal is approved and if the Operator is not a Participating Party in the identical Development Well proposal, the approved identical Development Well proposal shall be deemed withdrawn, with the effect as if the identical Development Well proposal had never been proposed and approved, and the Non-Operating Parties may then select a substitute Operator under Article 4.2.1 (Substitute Operator if Operator is a Non-Participating Party). Within _________ (__) days of the selection of the substitute Operator, the substitute Operator shall propose the drilling of an identical Development Well (except for any necessary modifications resulting from a change in the drilling rig to be utilized by the substitute Operator), and it shall commence drilling operations on that well within _________ (___) days after the end of the period for the approval of that Well. If an approved original or identical Development Well proposal is deemed withdrawn due to a failure to timely commence drilling operations on that well, all Costs incurred, which are attributable to the preparation for, or in furtherance of, that Development Well, will be chargeable to the Participating Parties. Drilling operations for a Development Well under this Article 13.1.3 shall be deemed to have commenced on the date the drilling rig arrives on location or, if the drilling rig is already on location, the date when actual drilling operations for the approved Development Well are undertaken.
Sample 1Sample 2See All (8)
AutoNDA by SimpleDocs
Substitute Operator if Operator Fails to Commence Drilling Operations). If the Operator fails to timely commence an Exploratory Well in accordance with Article 10.1.3 (Timely Operations), an Appraisal Well in accordance with Article 11.1.3 (Timely Operations) or a Development Well in accordance with Article 13.1.3 (Timely Operations), the non-operating Participating Parties may select a substitute Operator in the same manner as the selection of a successor Operator under Article 4.5 (Selection of Successor Operator), and the substitute Operator shall serve as the Operator only (a) for the drilling of that well through the release of the drilling rig for that well, (b) of the Lease on which the well is drilled, and (c) with the same authority, rights, obligations, and duties as the Operator, subject to the limitations in (a) and (b).
Sample 1Sample 2

Related to Substitute Operator if Operator Fails to Commence Drilling Operations)

  • Co-operation Each Party acknowledges that this ESA must be approved by the Department and agree that they shall use Commercially Reasonable efforts to cooperate in seeking to secure such approval.

  • List of Operator’s Subprocessors [Box 26] [Box 27] [Box 28] [Box 29]

  • Commencement of Operations The Partnership shall not begin operations on its Leases unless the Managing General Partner is satisfied that necessary title requirements have been satisfied.

  • Synchronization, Commissioning and Commercial Operation 4.1.1 The Power Producer shall give at least fifteen (15) days written notice to the SLDC / ALDC / DISCOM as the case may be, of the date on which it intends to synchronize the Power Project to the Grid System. 4.1.2 Subject to Article 4.1.1, the Power Project may be synchronized by the Power Producer to the Grid System when it meets all the connection conditions prescribed in the Grid Code and otherwise meets all other Indian legal requirements for synchronization to the Grid System. 4.1.3 The synchronization equipment and all necessary arrangements / equipment including Remote Terminal Unit (RTU) for scheduling of power generated from the Project and transmission of data to the concerned authority as per applicable regulation shall be installed by the Power Producer at its generation facility of the Power Project at its own cost. The Power Producer shall synchronize its system with the Grid System only after the approval of GETCO / SLDC / ALDC and GEDA. 4.1.4 The Power Producer shall immediately after each synchronization / tripping of generator, inform the sub-station of the Grid System to which the Power Project is electrically connected in accordance with applicable Grid Code. 4.1.5 The Power Producer shall commission the Project within SCOD. 4.1.6 The Power Producer shall be required to obtain Developer and/ or Transfer Permission, Key Plan drawing etc, if required, from GEDA. In cases of conversion of land from Agricultural to Non-Agriculture, the commissioning shall be taken up by GEDA only upon submission of N.A. permission by the Power Producer. 4.1.7 The Power Producer shall be required to follow the Forecasting and Scheduling procedures as per the Regulations issued by Hon’ble GERC from time to time. It is to clarify that in terms of GERC (Forecasting, Scheduling, Deviation Settlement and Related Matters of Solar and Wind Generation Sources) Regulations, 2019 the procedures for Forecasting, Scheduling & Deviation Settlment are applicable to all solar generators having combined installed capacity above 1 MW connected to the State Grid / Substation including those connected via pooling stations.

  • Safe Operations Notwithstanding any other provision of this Agreement, an NTO may take, or cause to be taken, such action with respect to the operation of its facilities as it deems necessary to maintain Safe Operations. To ensure Safe Operations, the local operating rules of the ITO(s) shall govern the connection and disconnection of generation with NTO transmission facilities. Safe Operations include the application and enforcement of rules, procedures and protocols that are intended to ensure the safety of personnel operating or performing work or tests on transmission facilities.

  • Rent Rolls; Operating Histories The Seller has obtained a rent roll (the “Certified Rent Roll(s)”) other than with respect to hospitality properties certified by the related Mortgagor or the related guarantor(s) as accurate and complete in all material respects as of a date within 180 days of the date of origination of the related Mortgage Loan. The Seller has obtained operating histories (the “Certified Operating Histories”) with respect to each Mortgaged Property certified by the related Mortgagor or the related guarantor(s) as accurate and complete in all material respects as of a date within 180 days of the date of origination of the related Mortgage Loan. The Certified Operating Histories collectively report on operations for a period equal to (a) at least a continuous three-year period or (b) in the event the Mortgaged Property was owned, operated or constructed by the Mortgagor or an affiliate for less than three years then for such shorter period of time, it being understood that for mortgaged properties acquired with the proceeds of a Mortgage Loan, Certified Operating Histories may not have been available.

  • PREVAILING WAGE RATES - PUBLIC WORKS AND BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor Law, the following shall apply:

  • Skilled Care in a Nursing Facility This plan covers skilled nursing services in a skilled nursing facility if: • the services are prescribed by a physician: • your condition needs skilled nursing services, skilled rehabilitation services or skilled nursing observation; • the services are provided by or supervised by licensed technical or professional medical personnel; and • the services are not custodial care, respite care, day care, or for the purpose of assisting with activities of daily living.

  • Continuous Operations Any employee or group of employees engaged in an operation for which there is regularly scheduled employment on a twenty-four (24) hour a day, seven (7) day a week basis shall be known as continuous operations employees.

  • PERIOD OF OPERATION Subject to certification, this Agreement shall come into force from the first pay period commencing on or after 1st December 2002 and shall remain in force until 31 October 2005.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!