Supplier Compliance Requirements. 4.1 The Supplier is responsible for obtaining regulatory registration and/or notification of this product, and its chemical composition, in all countries as follows: 1. Countries in which the material is produced. 2. Countries to which the Supplier ships the material for use in the Goodyear and Goodyear affiliated manufacturing locations. 4.2 On all materials, Goodyear reserves the option of a compound test and/or a factory trial as a deciding factor on the acceptance or rejection of any material. Testing may involve analytical methods such as GPC, HPLC and GCMS, as appropriate. Compound testing may include conventional or special test methods, and factory trials may range from mixing, extrusion, calendering, and/or tire building & testing. 4.3 Changes in Material Manufacturing or Manufacturing Plants: There shall be no change in the types of raw materials, method of production, and/or plant location used in the manufacturing of this Goodyear material code without approval of both the responsible Regional Purchasing Department and Akron Tire Materials Section (including approval recommendations from GTC*L Materials). 4.4 Test data reported in Sections 3.1 and 3.2 and material property characteristics stated in Section 2 are explicitly assured and meet the raw materials specification as detailed in this document. 4.5 The material as received at a Goodyear or Goodyear affiliated facility will be in conformance to Goodyear’s Packaging and Labeling Specification. The supplier is obligated to obtain a current copy of this specification. 4.6 The materials as received at a Goodyear or Goodyear affiliated receiving facility will be within the age limits specified in Goodyear’s policy controlling age limits. 4.7 It is a requirement that all suppliers use the Supplier Information System (SIS) when sending Certificates of Analysis (COA) quality data on each shipment. If multiple production lots of a product are sent, quality data for each lot must be entered. Name Xxxxx Xxxxxxxxx Company DOW Dear Xxxxx Attached is a copy of the new proposed Purchasing Materials Specification for Goodyear code Batrinic rev # 1, proposal 1 (your) You are listed as the contact for this material, please complete and return the information below. If you are not the appropriate person please forward this information to the responsible party in your organization. Please respond to this specification by marking one of the following:
Appears in 1 contract
Supplier Compliance Requirements. 4.1 The Supplier is responsible for obtaining regulatory registration and/or notification of this product, and its chemical composition, in all countries as follows:
1. Countries in which the material is produced.
2. Countries to which the Supplier ships the material for use in the Goodyear and Goodyear affiliated manufacturing locations.
4.2 On all materials, Goodyear reserves the option of a compound test and/or a factory trial as a deciding factor on the acceptance or rejection of any material. Testing may involve analytical methods such as GPC, HPLC and GCMS, as appropriate. Compound testing may include conventional or special test methods, and factory trials may range from mixing, extrusion, calendering, and/or tire building & testing.
4.3 Changes in Material Manufacturing or Manufacturing Plants: There shall be no change in the types of raw materials, method of production, and/or plant location used in the manufacturing of this Goodyear material code without approval of both the responsible Regional Purchasing Department and Akron Tire Materials Section (including approval recommendations from GTC*L Materials).
4.4 Test data reported in Sections 3.1 and 3.2 and material property characteristics stated in Section 2 are explicitly assured and meet the raw materials specification as detailed in this document.
4.5 The material as received at a Goodyear or Goodyear affiliated facility will be in conformance to Goodyear’s Packaging and Labeling Specification. The supplier is obligated to obtain a current copy of this specification.
4.6 The materials as received at a Goodyear or Goodyear affiliated receiving facility will be within the age limits specified in Goodyear’s policy controlling age limits.
4.7 It is a requirement that all suppliers use the Supplier Information System (SIS) when sending Certificates of Analysis (COA) quality data on each shipment. If multiple production lots of a product are sent, quality data for each lot must be entered. Date: 09-13-05 Code: Comodic The Goodyear Technical Center D/460D Tire Materials Section 0000 Xxxxxxx Xx. Xxxxx, XX 00000 E-mail Address xxxxxx@xxxxxxxx.xxx FAX: 0 000-000-0000 Attn: Xxxx Xxxxx We acknowledge the receipt of and agree to comply with your Final Material Acceptance Specification covering code Comodic Rev # 0 Finalized 09-13-05 on all shipments on or after 10-05-05 Our Trade Name Xxxxx Xxxxxxxxx Company DOW Dear Xxxxx Attached is a copy of the new proposed Purchasing Materials Specification or designation for Goodyear code Batrinic rev # 1, proposal 1 (your) You are listed as the contact for this material, please complete and return the information below. If you are not the appropriate person please forward this information to the responsible party in your organization. Please respond to material confirming with this specification by marking one of the followingis Buna*SB 1723-Schkopau Producer Plant Location Schkopau- Germany Company Dow Chemical Division Synthetic Rubber By Xxxx Xxxxxxxxx Date 10/26/05 Title Quality Coordinator
1. Material Code:
Appears in 1 contract
Supplier Compliance Requirements. 4.1 The Supplier is responsible for obtaining regulatory registration and/or notification of this product, and its chemical composition, in all countries as follows:
1. Countries in which the material is produced.
2. Countries to which the Supplier ships the material for use in the The Goodyear and Goodyear affiliated manufacturing locations.
4.2 On all materials, Goodyear reserves the option of a compound test and/or a factory trial as a deciding factor on the acceptance or rejection of any material. Testing may involve analytical methods such as GPC, HPLC and GCMS, as appropriate. Compound testing may include conventional or special test methods, and factory trials may range from mixing, extrusion, calendering, and/or tire building & testing.
4.3 Changes in Material Manufacturing or Manufacturing Plants: There shall be no change in the types of raw materials, method of production, and/or plant location used in the manufacturing of this Goodyear material code without approval of both the responsible Regional Purchasing Department and Akron Tire Materials Section (including approval recommendations from GTC*L Materials).
4.4 Test data reported in Sections 3.1 and 3.2 and material property characteristics stated in Section 2 are explicitly assured and meet the raw materials specification as detailed in this document.
4.5 The material as received at a Goodyear or Goodyear affiliated facility will be in conformance to Goodyear’s Packaging and Labeling Specification. The supplier is obligated to obtain a current copy of this specification.
4.6 The materials as received at a Goodyear or Goodyear affiliated receiving facility will be within the age limits specified in Goodyear’s policy controlling age limits.
4.7 It is a requirement that all suppliers use the Supplier Information System (SIS) when sending Certificates of Analysis (COA) quality data on each shipment. If multiple production lots of a product are sent, quality data for each lot must be entered. Date: 06-08-04 Code: Mosellic The Goodyear Technical Center D/460D Tire Materials Section 0000 Xxxxxxx Xx. Xxxxx, XX 00000 E-mail Address xxxxxx.xxxxxxx@xxxxxxxx.xxx FAX: 0 000-000-0000 Attn: Xxxx Dom Dera We acknowledge the receipt of and agree to comply with your Final Material Acceptance Specification covering code Mosellic Rev # 0 Finalized 06-08-04 on all shipments on or after 06-15-04 Our Trade Name Xxxxx Xxxxxxxxx or designation for material confirming with this specification is SE SLR-4630 Producer Plant Location DOW Olefinverbund GmbH SE plant Schkopau Company DOW Dear Xxxxx Attached is a copy of the new proposed Purchasing Materials Specification for Goodyear code Batrinic rev # 1, proposal 1 (your) You are listed as the contact for this material, please complete and return the information below. If you are not the appropriate person please forward this information to the responsible party in your organization. Please respond to this specification by marking one of the following:Europe Division Synthetic Rubber
Appears in 1 contract
Supplier Compliance Requirements. 4.1 The Supplier is responsible for obtaining regulatory registration and/or notification of this product, and its chemical composition, in all countries as follows:
1. Countries in which the material is produced.
2. Countries to which the Supplier ships the material for use in the The Goodyear and Goodyear affiliated manufacturing locations.
4.2 On all materials, Goodyear reserves the option of a compound test and/or a factory trial as a deciding factor on the acceptance or rejection of any material. Testing may involve analytical methods such as GPC, HPLC and GCMS, as appropriate. Compound testing may include conventional or special test methods, and factory trials may range from mixing, extrusion, calendering, and/or tire building & testing.
4.3 Changes in Material Manufacturing or Manufacturing Plants: There shall be no change in the types of raw materials, method of production, and/or plant location used in the manufacturing of this Goodyear material code without approval of both the responsible Regional Purchasing Department and Akron Tire Materials Section (including approval recommendations from GTC*L Materials).
4.4 Test data reported in Sections 3.1 and 3.2 and material property characteristics stated in Section 2 are explicitly assured and meet the raw materials specification as detailed in this document.
4.5 The material as received at a Goodyear or Goodyear affiliated facility will be in conformance to Goodyear’s Packaging and Labeling Specification. The supplier is obligated to obtain a current copy of this specification.
4.6 The materials as received at a Goodyear or Goodyear affiliated receiving facility will be within the age limits specified in Goodyear’s policy controlling age limits.
4.7 It is a requirement that all suppliers use the Supplier Information System (SIS) when sending Certificates of Analysis (COA) quality data on each shipment. If multiple production lots of a product are sent, quality data for each lot must be entered. Date: 09-21-04 Code: Cheffic The Goodyear Technical Center D/460D Tire Materials Section 0000 Xxxxxxx Xx. Xxxxx, XX 00000 E-mail Address xxxxxx@xxxxxxxx.xxx FAX: 0 000-000-0000 Attn: Xxxx Xxxxx We acknowledge the receipt of and agree to comply with your Final Material Acceptance Specification covering code Cheffic Rev # 1 Finalized 09-21-04 on all shipments on or after 10-12-04 Our Trade Name Xxxxx Xxxxxxxxx Company DOW Dear Xxxxx Attached is a copy of the new proposed Purchasing Materials Specification or designation for Goodyear code Batrinic rev # 1, proposal 1 (your) You are listed as the contact for this material, please complete and return the information below. If you are not the appropriate person please forward this information to the responsible party in your organization. Please respond to material confirming with this specification by marking one of the followingis Buna*SB 1739-Schkopau Producer Plant Location Schkopau- Germany Company Dow Chemical Division Synthetic Rubber By Xxxx Xxxxxxxxx Date 10/21/05 Title Quality Coordinator
1. Material Code:
Appears in 1 contract
Supplier Compliance Requirements. 4.1 The Supplier is responsible for obtaining regulatory registration and/or notification of this product, and its chemical composition, in all countries as follows:
1. Countries in which the material is produced.
2. Countries to which the Supplier ships the material for use in the Goodyear and Goodyear affiliated manufacturing locations.
4.2 On all materials, Goodyear reserves the option of a compound test and/or a factory trial as a deciding factor on the acceptance or rejection of any material. Testing may involve analytical methods such as GPC, HPLC and GCMSGC-MS, as appropriate. Compound testing may include conventional or special test methods, and factory trials may range from mixing, extrusion, calendering, and/or tire building & testing.
4.3 Changes in Material Manufacturing or Manufacturing Plants: There shall be no change in the types of raw materials, method of production, and/or plant location used in the manufacturing of this Goodyear material code without approval of both the responsible Regional Purchasing Department and Akron Tire Materials Section (including approval recommendations from GTC*L GIC*L Materials).
4.4 Test data reported in Sections 3.1 and 3.2 and material property characteristics stated in Section 2 are explicitly assured and meet the raw materials specification as detailed in this document.
4.5 The material as received at a Goodyear or Goodyear affiliated facility will be in conformance to Goodyear’s Packaging and Labeling Specification. The supplier is obligated to obtain a current copy of this specification.
4.6 The materials as received at a Goodyear or Goodyear affiliated receiving facility will be within the age limits specified in Goodyear’s policy controlling age limits.
4.7 It is a requirement that all suppliers use the Supplier Information System (SIS) when sending Certificates of Analysis (COA) quality data on each shipment. If multiple production lots of a product are sent, quality data for each lot must be entered. Name SSBR Enhanced [*****] [*****] [*****] [*****] [*****] SSBR Basic [*****] [*****] [*****] [*****] [*****] ESBR dry [*****] [*****] [*****] [*****] [*****] ESBR oil ext. [*****] [*****] [*****] [*****] [*****] The quantities set forth in the table above are in metric tonnes. Product Group Fixed Fee For 2011 (Euro/mt) 2012 – 2015 Fixed Fee limits range vs 2011 for existing grades of Products (Euro/mt) SSBR Enhanced [*****] [*****] SSBR Basic [*****] [*****] ESBR Dry [*****] [*****] ESBR Oil Ext. [*****] [*****] SSBR Enhanced Sprintan SLR-4602 Elliptic [*****] [*****] [*****] XXXX Xxxxx Xxxxxxxxx Company DOW Dear Xxxxx Attached is a copy of the new proposed Purchasing Materials Specification for Goodyear code Xxxxxxxx XXX-0000 Batrinic rev # 1, proposal 1 (your) You are listed as the contact for this material, please complete and return the information below[*****] [*****] [*****] Sprintan SLR-4630 Mosellic [*****] [*****] [*****] Sprintan SLR-6430 Canaric [*****] [*****] [*****] ESBR dry SB1500 Detrite [*****] [*****] [*****] SB1502 Binic [*****] [*****] [*****] ESBR oil extended SB1723 Comodic [*****] [*****] [*****] SB1739 Cheffic [*****] [*****] [*****] France GY DUNLOP Amiens DDP € [*****] France GY Usine Amien DDP € [*****] France GY DUNLOP Amiens Montlucon DDP € [*****] Germany Fulda DDP € [*****] Germany Fuerstenwalde DDP € [*****] Germany Hanau DDP € [*****] Germany Wittlich DDP € [*****] Germany Philippsburg DDP € [*****] Luxemburg GY S A / LUXEMBOURG DDP € [*****] Luxemburg GY S A / LUX. If you are not the appropriate person please forward this information to the responsible party in your organizationRec. Please respond to this specification by marking one of the following:Dept. DDP € [*****] Slovenia SAVA TIRES DOO FCA € [*****] Poland DEBICA SA TYRE CO FCA € [*****] UK GY DUNLOP TYRES DDP € [*****] Chile GOODYEAR DE CHILE S A I C FCA US$ [*****] China GOODYEAR DALIAN TIRE CFR US$ [*****] Indonesia GY INDONESIA TBK CFR US$ [*****] Malaysia GY MALAYSIA BERHAD CFR US$ [*****] Phillipines GY PHILIPPINES FCA US$ [*****] Taiwan GY TAIWAN CFR US$ [*****] Thailand GY THAILAND PUBLIC CFR US$ [*****] India GY INDIA CIF US$ [*****]
Appears in 1 contract
