Marking of Licensed Products To the extent commercially feasible and consistent with prevailing business practices, Company shall xxxx, and shall cause its Affiliates and Sublicensees to xxxx, all Licensed Products that are manufactured or sold under this Agreement with the number of each issued patent under the Patent Rights that applies to such Licensed Product.
Xxxxx of License Georgia Institute of Technology shall grant the Student a limited, nonexclusive, nontransferable and revocable license to use and occupy an assigned space in a Georgia Institute of Technology facility in accordance with the terms and conditions of this Contract (the “License”). The parties to this Contract do not intend that an estate, a tenancy or any other interest in property should pass from Georgia Institute of Technology to Student. Instead, it is the intention of the parties that the relationship between Georgia Institute of Technology and Student be that of licensor and licensee and the sole right of Student to use the assigned space as a living unit shall be based upon the License granted in this Contract.
Xxxxxx and Recall 1. When the Board determines to reduce the number of positions in one or more classifications covered by this agreement because of decreased enrollment of pupils, suspension of schools, territorial changes, lack of work, return to duty of an employee from a leave of absence, or financial reasons, the Board shall follow the procedure set forth in this Section. 2. The Board shall determine in which classification the layoffs should occur and the number of employees to be laid off. 3. The Board shall lay off employees in the affected classification on the basis of reverse seniority in that classification. Seniority shall be defined as the length of continuous service as a regular employee of the Board of Education. 4. The names of laid off employees shall be kept on a recall list by classification until for two years maximum. If the Board determines to fill any position in a classification during this period of time, the Board must offer the position to the most senior employee on the recall list for that classification. The offer of recall shall be made by written notice sent to the employee at his most recent address on record by certified mail. It is the employee's responsibility to keep the Board informed of his up to date address. The employee shall have seven (7) days after the notice is mailed to accept the offer of recall and report to work. If he does not report during such seven-day period, his name shall be eliminated from the recall list and the employment relationship between him and the Board shall cease. If the first employee on the recall list for a classification does not accept the recall, the Board shall offer the position to the next most senior employee from that classification on the recall list by the procedure outlined in this Section, and so on, until the position is filled. Any employee who resigns after receiving the notice provided in Division 4 of this Section, shall be entitled, upon request, to be placed upon the recall list and shall have same recall rights as if laid off. 5. For purposes of this Section, the following classifications will be used. 1. Bus Driver 9. Bus Aide 2. Bus Mechanic 10. Head Cook 3. Building Maintenance 11. Cafeteria Worker
Development Milestone Payments (i) In addition to the Closing Date Merger Consideration (less the Remaining Option Consideration and Rights Proceeds Amount, if any) and any Net TNF Sales Payments (as defined below), upon the attainment of the development ** Portions of the Exhibit have been omitted and have been filed separately pursuant to an application for confidential treatment filed with the Securities and Exchange Commission pursuant to Rule 24b-2 under the Securities Exchange Act of 1934, as amended. milestones set forth below (each, a “Development Milestone”), Parent shall, or shall cause the Surviving Corporation to, [**] after the occurrence of each Development Milestone, deliver to the Paying Agent (for further payment to the holders of Stock Certificates and Stock Agreements outstanding immediately prior to the Effective Time), via wire transfer of immediately available funds, the respective amounts set forth below minus, in each case, the applicable Contingent Consideration Distribution Fee associated therewith and any amount designated by the Stockholders’ Representatives to be placed in the Administrative Expense Account (each, a “Development Milestone Payment” and collectively, the “Development Milestone Payments”): (A) Upon FDA approval of Reslizumab for the treatment of eosinophilic esophagitis, a cash payment of [**]; (B) Upon marketing authorization of Reslizumab for the treatment of eosinophilic esophagitis being granted by the European Commission in accordance with Regulation (EC) No. 726/2004, a cash payment of [**]; (C) If Res 5-0010 Asthma Study Completion has not occurred on or prior to the Closing Date, then upon the occurrence of the Res 5-0010 Asthma Study Completion, a cash payment of $50,000,000 (fifty million dollars) (the “Res 5-0010 Asthma Payment”); (D) Upon FDA approval of Reslizumab for any asthma indication, a cash payment of [**]; (E) Upon marketing authorization of Reslizumab for the treatment of any asthma indication being granted by the European Commission in accordance with Regulation (EC) No. 726/2004, a cash payment of [**]; and (F) Upon FDA approval of an Oral Anti-TNF Product, a cash payment of [**].
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.
Tests and Preclinical and Clinical Trials The preclinical studies and clinical trials conducted by or, to the Company’s knowledge, on behalf of the Company, that are described in the Registration Statement, the Pricing Disclosure Package and the Prospectus, as applicable, and are intended to be submitted to the U.S. Food and Drug Administration (the “FDA”) or other comparable government entities, were and, if still ongoing, are being conducted in all material respects in accordance with experimental protocols, procedures and controls pursuant to accepted professional scientific standards and all Authorizations and Applicable Laws, including, without limitation, current Good Clinical Practices and Good Laboratory Practices and any applicable rules and regulations of the jurisdiction in which such trials and studies are being conducted; the descriptions of the results of such studies and trials contained in the Registration Statement, the Pricing Disclosure Package and the Prospectus are, to the Company’s knowledge, accurate and complete in all material respects and fairly present the data derived from such studies and trials; except to the extent disclosed in the Registration Statement, the Pricing Disclosure Package and the Prospectus, the Company is not aware of any studies or trials, the results of which the Company believes reasonably call into question the study or trial results described or referred to in the Registration Statement, the Pricing Disclosure Package and the Prospectus when viewed in the context in which such results are described and the clinical stage of development; and, except to the extent disclosed in the Registration Statement, the Pricing Disclosure Package or the Prospectus, the Company has not received any written notices or written correspondence from the FDA or any governmental entity requiring the termination or suspension of any preclinical studies or clinical trials conducted by or on behalf of the Company, other than ordinary course communications with respect to modifications in connection with the design and implementation of such trials, copies of which communications have been made available to you.
License Type Your license to a Product will be under a Named User or CPU license type, as specified on an order. Each Named User license to a Product entitles a Named User to access and use that Product in one production environment and up to two non-production environments. Each CPU license to a Product entitles you to assign the Product to a single CPU in one production environment and up to two non-production environments, for use in support of an unspecified number of Named Users.
Xxxxx of License; Limitations The Engineer is granted a limited revocable non-exclusive license to use the registered TxDOT trademark logo (TxDOT Flying “T”) on any deliverables prepared under this contract that are the property of the State. The Engineer may not make any use of the registered TxDOT trademark logo on any other materials or documents unless it first submits that request in writing to the State and receives approval for the proposed use. The Engineer agrees that it shall not alter, modify, dilute, or otherwise misuse the registered TxDOT trademark logo or bring it into disrepute.
Milestone Payments In the event that any Sellers believe that any Additional Milestone has been achieved during the Post-Closing Milestone Period, the Sellers’ Representative shall provide notice of such achievement to Purchaser. If Purchaser determines in its sole and reasonable discretion that such Additional Milestone has been achieved during the Post-Closing Milestone Period, then within thirty (30) days of such notice from Sellers’ Representative or, if earlier, within thirty (30) days of Purchaser’s determination that such Additional Milestone has been achieved, Purchaser shall notify Sellers’ Representative of its determination and pay to Sellers the Additional Milestone Payment payable in respect of such Additional Milestone. If Sellers’ Representative delivers such a notice and Purchaser determines, in its sole and reasonable discretion, that the applicable Additional Milestone has not been achieved, then, within thirty (30) days of Sellers’ Representative’s notice Purchaser shall notify Sellers’ Representative of such determination. If Sellers’ Representative believes that Sellers are entitled to payment of all or any portion of an Additional Milestone Payment hereunder which they have not received within thirty (30) days following the achievement of the Additional Milestone for which payment is due, Sellers’ Representative may, not later than twelve (12) months following the achievement of such Additional Milestone, deliver to Purchaser a notice setting forth Sellers’ Representative’s determination that all or a portion of such Additional Milestone Payment is due under this Agreement (the “Post-Closing Assessment Notice”). If Sellers’ Representative does not deliver to Purchaser a Post-Closing Assessment *** Portions of this page have been omitted pursuant to a request for Confidential Treatment filed separately with the Commission. Notice within such twelve (12) month period, then Sellers shall have been deemed to agree that the Additional Milestone has not been met and no payment with respect to such Additional Milestone is due to Sellers hereunder and Sellers shall have no further rights to such Milestone Payment or any portion thereof. Such Post-Closing Assessment Notice may be delivered before or after the expiration of the Post-Closing Milestone Period without affecting Sellers’ rights to the applicable Milestone Payment, provided that that applicable Additional Milestone was actually achieved prior to the expiration of such Post-Closing Milestone Period. If Purchaser shall object to Sellers’ determination that a Additional Milestone has been achieved as set forth in the Post-Closing Assessment Notice, then Purchaser shall deliver a dispute notice (a “Post-Closing Milestone Dispute Notice”) to Sellers’ Representative within fifteen (15) days following Sellers’ Representative’s delivery of the Post-Closing Assessment Notice. A representative of Purchaser, on the one hand, and the Sellers’ Representative, on the other, shall attempt in good faith to resolve any such objections within fifteen (15) days of the receipt by Sellers of the Post-Closing Milestone Dispute Notice. If no Post-Closing Milestone Dispute Notice is delivered within the fifteen (15) day time period, then Sellers’ determination that the Additional Milestone has been achieved, and that the amount of the Milestone Payment specified in the Post-Closing Milestone Dispute Notice is due hereunder, shall be deemed to be accepted and Purchaser shall pay to Sellers those amounts set forth in the Post-Closing Assessment Notice no later than five (5) days after the expiration of such fifteen (15) day time period.
Commercialization Efforts The RECIPIENT shall, including whether through its own efforts or the efforts of a licensee under a License Agreement allowed by the terms of this Attachment, use diligent and commercially reasonable efforts to commercialize at least one Commercial Product or Commercial Service or otherwise bring to practical application the Project Results in accordance with the commercial development plan submitted with the Application and including any changes to such commercial development plan in accordance with Section D3.01. For the avoidance of doubt, partnering or licensing activities shall be considered to be efforts to commercialize.
