Test fixture Sample Clauses

Test fixture. PCB motherboard must be 2.6 mm thick ±0.2mm and have no copper content between datum K and datum F (see Fig 2) except for a 4mm chassis ground, as shown in Fig 5. • Space for an EMI shield as included in the MSA should be provided. • A wind tunnel housing with poor thermal conduction will be used - a plastic (IR transparent to allow the potential use of an infrared camera) is recommended. • Dimensions of system and other features are represented in the drawings documenting the test unit • For the multiple module configurations it is assumed that the conditions drawn for module 1 will be duplicated for module ‘N’. i.e. the EMI shield will be present for all modules. • Blanking plates will be provided to close the front faceplate when modules are not inserted in test chamber slots but they will not fill the slot in the test PCB. • For multiple module tests the modules will all be adjacent to one another with no gaps from empty test chamber slots. It is recommended to fill slots from the slot closest to the inlet and incrementally leewards as more modules are added. • The test chamber will be clear of obstruction for 30cm after the outlet.
AutoNDA by SimpleDocs

Related to Test fixture

  • Furniture, Fixtures and Equipment Sublessee shall have the right to use during the Term the office furnishings and equipment within the Subleased Premises that are identified on Exhibit C attached hereto, as such exhibit may be adjusted by mutual agreement of the parties prior to the Third Floor Premises Delivery Date (the “Furniture”), provided Sublessee may only use the Furniture located in the Second Floor Premises after the Second Floor Commencement Date. The Furniture is provided in its “AS IS, WHERE IS” condition, without representation or warranty whatsoever. Sublessee shall insure the Furniture under the property insurance policy required under the Master Lease, as incorporated herein, and pay all taxes with respect to the Furniture. Sublessee shall maintain the Furniture in good condition and repair, reasonable wear and tear excepted, and shall be responsible for any loss or damage to the same occurring during the Term. Sublessee shall surrender the Furniture to Sublessor upon the termination of this Sublease in the same condition as exists as of the applicable Delivery Date, reasonable wear and tear excepted. Sublessee shall not remove any of the Furniture from the Subleased Premises. Notwithstanding anything to the contrary herein, Sublessee may provide Sublessor with written notice one (1) time not less than forty-five (45) days prior to the Third Floor Premises Delivery Date that lists any items of Furniture that Sublessee does not want to use and Sublessor shall, at no cost to Sublessee, remove such items from the Subleased Premises prior to the Third Floor Premises Delivery Date and such items shall no longer be considered Furniture hereunder. Notwithstanding the foregoing, provided Sublessee is not in default beyond the expiration of any applicable cure or grace period as of the date of the expiration or earlier termination of this Sublease, which condition may be waived by Sublessor in its sole discretion, then upon the expiration or earlier termination of this Sublease, the Furniture shall become the property of Sublessee, and Sublessee shall accept the same in its “AS IS, WHERE IS” condition, without representation or warranty whatsoever except as provided in the Bill of Sale referred to in the following sentence. In the event the Furniture is to become the property of Sublessee upon the expiration or earlier termination of this Sublease pursuant to the terms of the immediately preceding sentence, then Sublessor agrees to execute and deliver to Sublessee a Bill of Sale in the form of Exhibit D attached hereto conveying and transferring to Sublessee the Furniture.

  • Removal of Fixtures (a) So long as the Tenant is not in default hereunder at the expiration of the Term, the Tenant shall then have the right to remove its trade fixtures from the Premises but shall make good any damage caused to the Premises resulting from the installation or removal thereof; provided that all alterations, additions and improvements constructed and installed in the Premises and attached in any manner to the floors, walls or ceiling, including any floor covering and light fixtures, are hereby deemed not to be trade fixtures and shall remain upon and be surrendered with the Premises, except to the extent the Landlord requires removal thereof. (b) If the Tenant fails to remove its trade fixtures and restore the Premises as aforesaid, all such trade fixtures shall become the property of the Landlord except to the extent that the Landlord continues to require removal thereof. (c) Should the Tenant abandon the Premises or should this Lease be terminated before the proper expiration of the Term due to a default on the part of the Tenant then, in such event, as of the moment of default by the Tenant, all trade fixtures and furnishings of the Tenant (whether or not attached in any manner to the Premises) shall, except to the extent the Landlord requires the removal thereof, become and be deemed to be the property of the Landlord, without indemnity to the Tenant and as additional liquidated damages in respect of such default but without prejudice to any other right or remedy of the Landlord. (d) Notwithstanding that any trade fixtures, alterations, additions, improvements or fixtures are or may become the property of the Landlord, the Tenant shall forthwith remove all or part of the same and shall make good any damage caused to the Premises resulting from the installation or removal thereof, all at the Tenant’s expense, should the Landlord so require by notice to the Tenant. (e) If the Tenant, after receipt of a notice from the Landlord, fails to promptly remove any trade fixtures, furnishings, alterations, additions, improvements and fixtures in accordance with such notice, then the Landlord may enter into the Premises and remove therefrom all or part of such trade fixtures, furnishings, alterations, additions, improvements and fixtures without any liability and at the expense of the Tenant, which expense shall forthwith be paid by the Tenant to the Landlord.

  • Personal Property In addition to the real property described in Section II, the Seller shall include the following personal property:

  • Stored equipment We accept no responsibility for any stored equipment or other property brought on to or left at the premises, and all liability for loss or damage is hereby excluded. All equipment and other property (other than stored equipment) must be removed at the end of each hiring or we will charge fees each day or part of a day at the hire fee per hiring until the same is removed. We may, in our discretion, dispose of any items referred to below by sale or otherwise on such terms and conditions as we think fit, and charge you any costs we incur in storing and selling or otherwise disposing of the same, in any of the following circumstances: (i) your failure either to pay any charges in respect of stored equipment due and payable or to remove the same within seven days after the agreed storage period has ended (ii) your failure to dispose of any property brought on to the premises for the purposes of the hiring.

  • Tooling Unless otherwise specified in this Agreement, all tooling and/or all other articles required for the performance hereof shall be furnished by Seller, maintained in good condition and replaced when necessary at Seller's expense. If NETAPP agrees to pay Seller for special tooling or other items either separately or as a stated part of the unit price of Goods purchased herein, title to same shall be and remain in NETAPP upon payment therefore.

  • Fixtures The Seller agrees that all fixtures shall be included as part of the sale EXCEPT: _

  • Removal of Equipment Subject, always, to the other terms and provisions of this Fee Agreement, the Company and any Sponsor Affiliates shall be entitled to remove and dispose of components of the Project from the Project in its sole discretion with the result that said components shall no longer be considered a part of the Project and, to the extent such constitute Economic Development Property, shall no longer be subject to the terms of this Fee Agreement. Economic Development Property is disposed of only when it is scrapped or sold or removed from the Project. If it is removed from the Project, it is subject to ad valorem property taxes to the extent the Property remains in the State and is otherwise subject to ad valorem property taxes.

  • Tenant’s Equipment Tenant shall provide notice to Landlord prior to moving any heavy machinery, heavy equipment, freight, bulky matter or fixtures (collectively, “Equipment”) into or out of the Building and shall pay to Landlord any costs actually incurred by Landlord in connection therewith. If such Equipment requires special handling, Tenant agrees (a) to employ only persons holding all necessary licenses to perform such work, (b) all work performed in connection therewith shall comply with all applicable Requirements and (c) such work shall be done only during hours designated by Landlord.

  • Removal of Tenant’s Property Upon the expiration or earlier termination of this Lease or the termination of Tenant's right of possession of the Premises only, Tenant shall have the right, at its sole cost and expense, for a period of fifteen ( 15) days thereafter to remove Tenant's Property, Distinctive Property and the Financed Personalty, respectively, from the Premises, provided that Tenant shall pay to Landlord Rent due under Article 3 hereof for the actual number of days which elapse during such fifteen (15) day period until the Tenant's Property, Distinctive Property and the Financed Personalty, as applicable, are removed from the Premises. If and to the extent that Tenant fails to remove any of such property by the expiration of said fifteen (15) day period, Landlord agrees that Tenant Lender, TE Lender and Franchisor each shall have the right for a period of forty (45) days thereafter to remove the same from the Premises, provided that Tenant shall pay to Landlord Rent due hereunder for the actual number of days which elapse until Tenant Lender, TE Lender or Franchisor remove the same from the Premises during such forty five (45) day period. If and to the extent that any such property remains on the Premises on the sixtieth (60th) day after such termination, the same shall be deemed abandoned, and at Landlord's option shall become the property of Landlord and may be sold or disposed of as Land-lord may determine; provided, however, that Landlord shall not use, suffer or permit the use of any Distinctive Property unless the attributes or features thereof associated with Tenant or Franchisor are removed or obliterated. Any and all damage to the Building caused by or resulting from the removal of Tenant's Property, Distinctive Property or Financed Personalty shall promptly be repaired at no cost or expense to Landlord and Tenant shall be liable for such cost and expense unless such repairs are made by Tenant, Franchisor or TE Lender, as the case may be.

  • Utility Installations Trade Fixtures Alterations 8.3.1 The term “Utility Installations” refers to all floor and window coverings, air and/or vacuum lines, power panels, electrical distribution, security and fire protection systems, communication cabling, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term “Trade Fixtures” shall mean Lessee’s machinery and equipment that can be removed without doing material damage to the Premises. The term “Alterations” shall mean any modification of the improvements, other than Utility Installations or Trade Fixtures, whether by addition or deletion. “Lessee Owned Alterations and/or Utility Installations” are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Section 8.4.1.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!