Common use of Testing/Trouble Reporting Clause in Contracts

Testing/Trouble Reporting. 1.13.4.1 Clearwave Communications will be responsible for testing and isolating troubles on Network Elements. Clearwave Communications must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from XxxxXxxxx at the time of the trouble report, Clearwave Communications will be required to provide the results of the Clearwave Communications test which indicate a problem on the BellSouth network. 1.13.4.2 Once Clearwave Communications has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Clearwave Communications reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Clearwave Communications a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Clearwave Communications (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill Clearwave Communications for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Clearwave Communications InterGlobe will be responsible for testing and isolating troubles on Network Elements. Clearwave Communications InterGlobe must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from XxxxXxxxx BellSouth at the time of the trouble report, Clearwave Communications InterGlobe will be required to provide the results of the Clearwave Communications InterGlobe test which indicate a problem on the BellSouth network. 1.13.4.2 Once Clearwave Communications InterGlobe has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Clearwave Communications InterGlobe reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Clearwave Communications InterGlobe a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Clearwave Communications InterGlobe (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill Clearwave Communications InterGlobe for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Clearwave Communications U-Dial will be responsible for testing and isolating troubles on Network Elements. Clearwave Communications U-Dial must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from XxxxXxxxx BellSouth at the time of the trouble report, Clearwave Communications U-Dial will be required to provide the results of the Clearwave Communications U-Dial test which indicate a problem on the BellSouth network. 1.13.4.2 Once Clearwave Communications U-Dial has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Clearwave Communications U-Dial reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Clearwave Communications U-Dial a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Clearwave Communications U-Dial (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill Clearwave Communications U-Dial for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Clearwave Communications Micro-Comm will be responsible for testing and isolating troubles on Network Elements. Clearwave Communications Micro-Comm must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from XxxxXxxxx BellSouth at the time of the trouble report, Clearwave Communications Micro-Comm will be required to provide the results of the Clearwave Communications Micro-Comm test which indicate a problem on the BellSouth network. 1.13.4.2 Once Clearwave Communications Micro-Comm has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Clearwave Communications Micro-Comm reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Clearwave Communications Micro-Comm a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Clearwave Communications Micro-Comm (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill Clearwave Communications Micro-Comm for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Clearwave Communications Speedy Reconnect will be responsible for testing and isolating troubles on Network Elements. Clearwave Communications Speedy Reconnect must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from XxxxXxxxx BellSouth at the time of the trouble report, Clearwave Communications Speedy Reconnect will be required to provide the results of the Clearwave Communications Speedy Reconnect test which indicate a problem on the BellSouth network. 1.13.4.2 Once Clearwave Communications Speedy Reconnect has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Clearwave Communications Speedy Reconnect reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Clearwave Communications Speedy Reconnect a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Clearwave Communications Speedy Reconnect (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill Clearwave Communications xxxx Speedy Reconnect for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Clearwave Communications Nex-Phon will be responsible for testing and isolating troubles on Network Elements. Clearwave Communications Nex-Phon must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from XxxxXxxxx BellSouth at the time of the trouble report, Clearwave Communications Nex-Phon will be required to provide the results of the Clearwave Communications Nex-Phon test which indicate a problem on the BellSouth network. 1.13.4.2 Once Clearwave Communications Nex-Phon has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Clearwave Communications Nex-Phon reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Clearwave Communications Nex-Phon a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Clearwave Communications Nex-Phon (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill Clearwave Communications xxxx Nex- Phon for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Clearwave EZ Communications will be responsible for testing and isolating troubles on Network Elements. Clearwave EZ Communications must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from XxxxXxxxx at the time of the trouble report, Clearwave EZ Communications will be required to provide the results of the Clearwave EZ Communications test which indicate a problem on the BellSouth network. 1.13.4.2 Once Clearwave EZ Communications has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Clearwave EZ Communications reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Clearwave EZ Communications a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Clearwave EZ Communications (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill Clearwave EZ Communications for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Clearwave Communications Deland Actel will be responsible for testing and isolating troubles on Network Elements. Clearwave Communications Deland Actel must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from XxxxXxxxx BellSouth at the time of the trouble report, Clearwave Communications Deland Actel will be required to provide the results of the Clearwave Communications Deland Actel test which indicate a problem on the BellSouth network. 1.13.4.2 Once Clearwave Communications Deland Actel has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Clearwave Communications Deland Actel reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Clearwave Communications Deland Actel a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Clearwave Communications Deland Actel (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill Clearwave Communications xxxx Xxxxxx Actel for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Clearwave Communications FeroNetworks will be responsible for testing and isolating troubles on Network Elements. Clearwave Communications FeroNetworks must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from XxxxXxxxx BellSouth at the time of the trouble report, Clearwave Communications FeroNetworks will be required to provide the results of the Clearwave Communications FeroNetworks test which indicate a problem on the BellSouth network. 1.13.4.2 Once Clearwave Communications FeroNetworks has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Clearwave Communications FeroNetworks reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Clearwave Communications FeroNetworks a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Clearwave Communications FeroNetworks (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill Clearwave Communications xxxx FeroNetworks for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.

Testing/Trouble Reporting. 1.13.4.1 Clearwave Communications Xxxxxxx Telephone will be responsible for testing and isolating troubles on Network Elements. Clearwave Communications Xxxxxxx Telephone must test and isolate trouble to the BellSouth network before reporting the trouble to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from XxxxXxxxx BellSouth at the time of the trouble report, Clearwave Communications Xxxxxxx Telephone will be required to provide the results of the Clearwave Communications Xxxxxxx Telephone test which indicate a problem on the BellSouth network. 1.13.4.2 Once Clearwave Communications Xxxxxxx Telephone has isolated a trouble to the BellSouth network, and has issued a trouble report to BellSouth, BellSouth will take the actions necessary to repair the Network Element when trouble is found. BellSouth will repair its network facilities to its wholesale customers in the same time frames that BellSouth repairs similar services to its retail End Users. 1.13.4.3 If Clearwave Communications Xxxxxxx Telephone reports a trouble on a BellSouth Network Element and no trouble is found in BellSouth’s network, BellSouth will charge Clearwave Communications Xxxxxxx Telephone a Maintenance of Service Charge for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Network Element’s working status. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1. 1.13.4.4 In the event BellSouth must dispatch to the End User’s location more than once due to incorrect or incomplete information provided by Clearwave Communications Xxxxxxx Telephone (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will bill Clearwave Communications xxxx Xxxxxxx Telephone for each additional dispatch required to repair the Network Element due to the incorrect/incomplete information provided. BellSouth will assess the applicable Maintenance of Service rates from BellSouth’s FCC No.1 Tariff, Section 13.3.1.