[Momentum Version Sample Clauses

[Momentum Version. Except to the extent expressly provided otherwise in this Attachment, <<customer_short_name>> may not maintain unbundled network elements or combinations of unbundled network elements, that are no longer offered pursuant to this Agreement (collectively “Arrangements”). In the event BellSouth determines that <<customer_short_name>> has in place any Arrangements after the Effective Date of this Agreement, BellSouth may, upon 30 days written disconnect such Arrangements with out notice under this Agreement to <<customer_short_name>> migrate discontinued UNEs to similar arrangements provided under available tariffs.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
[Momentum Version. Notwithstanding any other provision of this Agreement, BellSouth shall not be obligated to commingle or combine Network Elements or Combinations with any service, network element or other offering that it is obligated to make available only pursuant to Section 271 of the Act.
Sample 1Sample 2Sample 3
[Momentum Version. The rates for <<customer_short_name>>’s Embedded Base of Dark Fiber Loops during the Transition Period shall, according to the terms of Section 51.31.319 of the FCC Rules, 47 C.F.R. § 51.319, as in effect of the Effective Date of this Attachment, be: be as set forth in Exhibit A 2.8.4.4.1 115% of the rate Momentum was obligated to pay for the Dark Fiber Loop on June 15, 2004; or 2.8.4.4.2 155% of the rate the Commission established between June 16, 2004 and March 11, 2005 for the Dark Fiber Loop. 2.8.4.4.3 To the extend that a Commission order referenced in this section raised some rate and lowered others for UNE Dark Fiber Loop, BellSouth must choose to apply either all or none of these rate changes and must notify Momentum within 10 days of the Effective Date of this Attachment which option BellSouth selects.
Sample 1Sample 2Sample 3
[Momentum Version. During the Transition Period only, BellSouth shall make Local Switching available for the Embedded Base, in addition to all elements that are required to be provided in conjunction with Local Switching, at the rates, terms and conditions set forth in this Attachment. The Transition Period shall apply only to <<customer_short_name>>’s Embedded Base and <<customer_short_name>> shall not place new orders to add new customers for Local Switching pursuant to this Agreement.
Sample 1Sample 2Sample 3
[Momentum Version. During the Transition Period only, BellSouth shall make UNE-P available for the Embedded Base, in addition to all elements that are required to be provided in conjunction with UNE-P, at the rates, terms and conditions set forth in this Attachment. The Transition Period shall apply only to <<customer_short_name>>’s Embedded Base and <<customer_short_name>> shall not place new orders to add new customers for UNE-P pursuant to this Agreement.
Sample 1Sample 2Sample 3
[Momentum Version. For calls terminating to third party carriers, such as CLECs, wireless carriers and independent companies, utilizing their own switches to serve their End Users, <<customer_short_name>> is required to enter into interconnection or traffic exchange agreements with such third parties for the exchange of traffic through BellSouth’s network. If such third party carrier bills BellSouth for terminating such calls, BellSouth shall forward such bills to Momentum and is not responsible for payment of charges incurred by Momentum. [BellSouth version] For calls terminating to third party carriers, such as CLECs, wireless carriers and independent companies, utilizing their own switches to serve their End Users, <<customer_short_name>> is required to enter into interconnection or traffic exchange agreements with such third parties for the exchange of traffic through BellSouth’s network. If <<customer_short_name>> does not have such an agreement with a third party carrier and BellSouth is charged termination charges by a third party terminating a call originated by <<customer_short_name>>, or if such third party carrier bills BellSouth for terminating such calls, despite the existence of such an agreement, then BellSouth may, at its option: 5.5.3.1.1 pay such charges as billed by the third party carrier and charge End Office Switching as set forth in Exhibit A to <<customer_short_name>> for each such call; or 5.5.3.1.2 pay such charges as billed by the third party carrier and <<customer_short_name>> will reimburse the full amount of such charges within thirty (30) days of BellSouth’s request for reimbursement.
Sample 1
[Momentum Version. For calls originated by third party carriers, such as CLECs, wireless carriers and independent companies,utilizing their own switches to serve their End Users, <<customer_short_name>> is required to enter into interconnection or traffic exchange agreements with such third parties for the exchange of traffic through BellSouth’s network. <<customer_short_name>> may xxxx the third parties according to such agreements and shall not xxxx BellSouth for the exchange of traffic through BellSouth’s network. BellSouth shall not receive compensation from third party carriers due Momentum.
Sample 1
AutoNDA by SimpleDocs
[Momentum Version. Intercarrier compensation shall apply as follows for intralata 1+ dialed calls originated by <<customer_short_name>> utilizing Local Switching where <<customer_short_name>> uses BellSouth’s 5124 CIC for its End User’s LPIC: 5.5.3.3.1 For calls terminating to a BellSouth End User or to an End User served by BellSouth resold services, BellSouth shall charge <<customer_short_name>> for End Office Switching as set forth in Exhibit A at the terminating end office.
Sample 1
[Momentum Version. For calls terminating to a CLEC where such CLEC is utilizing a BellSouth switch port or port/loop combination to provide service to its End User, BellSouth shall charge <<customer_short_name>> for End Office Switching as set forth in Exhibit A at the terminating end office. BellSouth will not charge the terminating CLEC for End Office Switching at the terminating end office. In the event that BellSouth is charged termination charges by the CLEC, BellSouth shall forward such bills to Momentum and is not responsible for payment of charges incurred by Momentum. [BellSouth Version] For calls terminating to a CLEC where such CLEC is utilizing a BellSouth switch port or port/loop combination to provide service to its End User, BellSouth shall charge <<customer_short_name>> for End Office Switching as set forth in Exhibit A at the terminating end office. BellSouth will not charge the terminating CLEC for End Office Switching at the terminating end office. In the event that BellSouth is charged termination charges by the CLEC, BellSouth may pay such charges and <<customer_short_name>> will reimburse BellSouth the full amount of such charges within thirty (30) days following BellSouth’s request for reimbursement.
Sample 1

Related to [Momentum Version

  • SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.

  • Distribution of UDP and TCP queries DNS probes will send UDP or TCP “DNS test” approximating the distribution of these queries.

  • SOFTWARE PRODUCT LICENSE The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold.

  • Source Code Escrow On the date hereof, Company shall deliver to an independent third party escrow agent, selected and designated by AMEX and approved by Company (such approval not to be unreasonably withheld) ("Escrow Agent"), for deposit in accordance with an escrow agreement among the Escrow Agent and the parties hereto and substantially in the form attached as Exhibit E ("Escrow Agreement"), a current and complete copy of the source code (the "Source Code") for the Domain Name and any other materials required to operate the Source Code (the "Escrow Materials"). Within [ ** ] of the installation of any new update to the Service (or any other substantial modification to the Source Code, the Domain Name or the Service) or within [ ** ] of the last deposit hereunder, whichever is sooner, Company shall deliver to the Escrow Agent, for deposit in accordance with such Escrow Agreement, any and all changes to the Escrow Materials which correspond to changes, if any, made to the corresponding Escrow Material or shall notify Escrow Agent that no changes were made during the preceding period. All materials deposited hereunder shall be considered "Escrow Materials" as the term is used herein. In the event of (i) the Company's insolvency (as defined in Section 16(e)) or (ii) the Company's material breach of the terms of this Agreement specifically because of its gross negligence or willful misconduct and such breach is not fully remedied within thirty (30) days of AMEX's notice to Company, then notwithstanding any other rights and remedies to which AMEX may be entitled, AMEX shall immediately have the right to obtain a copy of the Escrow Materials from the Escrow Agent upon written notice as provided in the Escrow Agreement for use in continued provision of the Service. AMEX shall have the right, at any time upon at least ten (10) days' written notice to Company and Escrow Agent, to select and designate a new escrow agent to replace the Escrow Agent hereunder. Upon such notice, Escrow Agent shall completely, safely and securely transfer the Escrow Materials to the new escrow agent (which will then become the "Escrow Agent" hereunder) and confirm such transfer in writing to AMEX and Company. ** INDICATES CONFIDENTIAL TREATMENT REQUESTED.

  • Mail Order Catalog Warnings In the event that, the Settling Entity prints new catalogs and sells units of the Products via mail order through such catalogs to California consumers or through its customers, the Settling Entity shall provide a warning for each unit of such Product both on the label in accordance with subsection 2.4 above, and in the catalog in a manner that clearly associates the warning with the specific Product being purchased. Any warning provided in a mail order catalog shall be in the same type size or larger than other consumer information conveyed for such Product within the catalog and shall be located on the same display page of the item. The catalog warning may use the Short-Form Warning content described in subsection 2.3(b) if the language provided on the Product label also uses the Short-Form Warning.

  • Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety

  • Computer Equipment Recycling Program If this Contract is for the purchase or lease of computer equipment, then Contractor certifies that it is in compliance with Subchapter Y, Chapter 361 of the Texas Health and Safety Code related to the Computer Equipment Recycling Program and the Texas Commission on Environmental Quality rules in 30 TAC Chapter 328.

  • Distribution System The Transmission Owner’s facilities and equipment used to transmit electricity to ultimate usage points such as homes and industries directly from nearby generators or from interchanges with higher voltage transmission networks which transport bulk power over longer distances. The voltage levels at which Distribution Systems operate differ among areas. Distribution Upgrades – The additions, modifications, and upgrades to the Transmission Owner’s Distribution System at or beyond the Point of Interconnection to facilitate interconnection of the Small Generating Facility and render the transmission service necessary to effect the Interconnection Customer’s wholesale sale of electricity in interstate commerce.

  • Unbundled Sub-Loop Distribution Voice Grade (USLD-VG) is a copper sub- loop facility from the cross-box in the field up to and including the point of demarcation at the End User’s premises and may have load coils.

  • Preference for domestically manufactured goods The provisions of paragraphs 2.54 and 2.55 of the Guidelines and Appendix 2 thereto shall apply to goods manufactured in the territory of the Borrower.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!