Thickness Measurements Sample Clauses

Thickness Measurements. The measurement of insulation thickness and over sheath thickness shall be made on samples taken not less than 150mm from the ends of factory length. These measurements shall be taken as required by the purchaser, or if not so required on random samples taken by the manufacturer.
AutoNDA by SimpleDocs
Thickness Measurements. Verification of the installed tube thickness shall be determined by measuring the thickness of the available samples using a calibrated measuring device. A minimum of four (4) readings shall be taken from each sample (minus the coating thickness provided by the bidder) and the mean value of all readings shall be used. The sample thickness shall be acceptable if it meets or exceeds 90% of the design minimum wall thickness specified. Penalties assessed to the contractor for failing to obtain 90% of the design thickness are described in Part I, subsection 4.5.

Related to Thickness Measurements

  • Temperature Measurement Temperature will be measured by the nearest automatic Melbourne Bureau of Meteorology Monitoring Station for example (but not limited to): Melbourne, Moorabbin, Dunns Hill, Melbourne Airport, Frankston, and Point Xxxxxx. At the commencement of each project, the onsite management and employee representatives shall agree which is to be the applicable automatic weather monitoring station.

  • Mileage Measurement Where required, the mileage measurement for LIS rate elements is determined in the same manner as the mileage measurement for V&H methodology as outlined in NECA Tariff No. 4.

  • Usage Measurement Usage measurement for calls shall begin when answer supervision or equivalent Signaling System 7 (SS7) message is received from the terminating office and shall end at the time of call disconnect by the calling or called subscriber, whichever occurs first.

  • Registry Performance Specifications Registry Performance Specifications for operation of the TLD will be as set forth in Specification 10 attached hereto (“Specification 10”). Registry Operator shall comply with such Performance Specifications and, for a period of at least one (1) year, shall keep technical and operational records sufficient to evidence compliance with such specifications for each calendar year during the Term.

  • Interim Measures Notwithstanding any requirements for alternative dispute resolution procedures as set forth in Articles 18(B), any party to the Dispute may apply to a court for interim measures (i) prior to the constitution of the arbitral tribunal (and thereafter as necessary to enforce the arbitral tribunal’s rulings); or (ii) in the absence of the jurisdiction of the arbitral tribunal to rule on interim measures in a given jurisdiction. The Parties agree that seeking and obtaining such interim measures shall not waive the right to arbitration. The arbitrators (or in an emergency the presiding arbitrator acting alone in the event one or more of the other arbitrators is unable to be involved in a timely fashion) may grant interim measures including injunctions, attachments and conservation orders in appropriate circumstances, which measures may be immediately enforced by court order. Hearings on requests for interim measures may be held in person, by telephone, by video conference or by other means that permit the parties to the Dispute to present evidence and arguments.

  • Provisional Measures 1. The judicial authorities shall have the authority to order prompt and effective provisional measures: (a) to prevent an infringement of any intellectual property right from occurring, and in particular to prevent the entry into the channels of commerce in their jurisdiction of goods, including imported goods immediately after customs clearance; (b) to preserve relevant evidence in regard to the alleged infringement. 2. The judicial authorities shall have the authority to adopt provisional measures inaudita altera parte where appropriate, in particular where any delay is likely to cause irreparable harm to the right holder, or where there is a demonstrable risk of evidence being destroyed. 3. The judicial authorities shall have the authority to require the applicant to provide any reasonably available evidence in order to satisfy themselves with a sufficient degree of certainty that the applicant is the right holder and that the applicant’s right is being infringed or that such infringement is imminent, and to order the applicant to provide a security or equivalent assurance sufficient to protect the defendant and to prevent abuse. 4. Where provisional measures have been adopted inaudita altera parte, the parties affected shall be given notice, without delay after the execution of the measures at the latest. A review, including a right to be heard, shall take place upon request of the defendant with a view to deciding, within a reasonable period after the notification of the measures, whether these measures shall be modified, revoked or confirmed. 5. The applicant may be required to supply other information necessary for the identification of the goods concerned by the authority that will execute the provisional measures. 6. Without prejudice to paragraph 4, provisional measures taken on the basis of paragraphs 1 and 2 shall, upon request by the defendant, be revoked or otherwise cease to have effect, if proceedings leading to a decision on the merits of the case are not initiated within a reasonable period, to be determined by the judicial authority ordering the measures where a Member's law so permits or, in the absence of such a determination, not to exceed 20 working days or 31 calendar days, whichever is the longer. 7. Where the provisional measures are revoked or where they lapse due to any act or omission by the applicant, or where it is subsequently found that there has been no infringement or threat of infringement of an intellectual property right, the judicial authorities shall have the authority to order the applicant, upon request of the defendant, to provide the defendant appropriate compensation for any injury caused by these measures. 8. To the extent that any provisional measure can be ordered as a result of administrative procedures, such procedures shall conform to principles equivalent in substance to those set forth in this Section. SECTION 4: SPECIAL REQUIREMENTS RELATED TO BORDER MEASURES12

  • Measuring EPP parameters Every 5 minutes, EPP probes will select one “IP address” of the EPP servers of the TLD being monitored and make an “EPP test”; every time they should alternate between the 3 different types of commands and between the commands inside each category. If an “EPP test” result is undefined/unanswered, the EPP service will be considered as unavailable from that probe until it is time to make a new test.

  • Measuring DNS parameters Every minute, every DNS probe will make an UDP or TCP “DNS test” to each of the public-­‐DNS registered “IP addresses” of the name servers of the domain name being monitored. If a “DNS test” result is undefined/unanswered, the tested IP will be considered unavailable from that probe until it is time to make a new test.

  • New Job Classifications When a new classification (which is covered by the terms of this collective agreement) is established by the Hospital, the Hospital shall determine the rate of pay for such new classification and notify the local Union of the same. If the local Union challenges the rate, it shall have the right to request a meeting with the Hospital to endeavour to negotiate a mutually satisfactory rate. Such request will be made within ten (10) days after the receipt of notice from the Hospital of such new occupational classification and rate. Any change mutually agreed to resulting from such meeting shall be retroactive to the date that notice of the new rate was given by the Hospital. If the parties are unable to agree, the dispute concerning the new rate may be submitted to arbitration as provided in the agreement within fifteen (15) days of such meeting. The decision of the arbitrator (or board of arbitration as the case may be) shall be based on the relationship established by comparison with the rates for other classifications in the bargaining unit having regard to the requirements of such classification. When the Hospital makes a substantial change in the job content of an existing classification which in reality causes such classification to become a new classification, the Hospital agrees to meet with the Union if requested to permit the Union to make representation with respect to the appropriate rate of pay. If the matter is not resolved following the meeting with the Union, the matter may be referred to arbitration as provided in the agreement within fifteen (15) days of such meeting. The decision of the arbitrator (or board of arbitration as the case may be) shall be based on the relationship established by comparison with the rates for other classifications in the bargaining unit having regard to the requirements of such classifications. The parties further agree that any change mutually agreed to or awarded as a result of arbitration shall be retroactive only to the date that the Union raised the issue with the Hospital. The parties further agree that the above process as provided herein shall constitute the process for Pay Equity Maintenance as required by the Pay Equity Act.

  • Corrective Measures If the Participating Generator fails to meet or maintain the requirements set forth in this Agreement and/or the CAISO Tariff, the CAISO shall be permitted to take any of the measures, contained or referenced in the CAISO Tariff, which the CAISO deems to be necessary to correct the situation.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!