Construction Standards The Developer shall construct the Subdivision in accordance with the Subdivision Plan, as approved by the Planning Commission, and if applicable, the requirements of the Design Review Committee, and in accordance with the requirements of (a) the Millington Subdivision Regulations; (b) standards and specifications contained in “Local Public Works Standard, and Specifications”, as amended to include specific requirements for construction in Millington, TN; (c) the Building Code (as adopted by Shelby County); (d) the Fire Code (as adopted by Shelby County); (e) the Millington Zoning Ordinance; and (f) the applicable Ordinances of the City. Items (a) through (f) are hereby made a part of this Agreement by reference and are hereinafter referred to collectively as the “Codes”. References herein to the Codes are to those in effect on the Effective Date unless amendments are hereafter made which apply to all improvements or subdivisions regardless of their date of commencement and/or completion of construction. The Conditions of Approval established by the Planning Commission, and, as applicable, the Design Review Committee (any or all of which as may have been modified by the Board of Mayor and Aldermen) are set forth in Exhibit “A” to this Agreement and are incorporated herein by reference and made a part hereof.
General specifications For the purpose of this Regulation, the vehicle shall fulfil the following requirements:
MSAA Indicator Technical Specification Document This Agreement shall be interpreted with reference to the MSAA Indicator Technical Specifications document.
Tenant Improvement Plans Any work proposed by Tenant (the “Tenant Improvements”) shall be subject to Landlord’s reasonable prior approval and shall be subject to the other terms and conditions of this Exhibit C; provided that it will be reasonable for Landlord to withhold its approval or consent (as and when applicable under this Exhibit C) if Landlord’s Mortgagee has not consented to the matter that is the subject of such approval or consent. All architectural, engineering and other design fees shall be paid by Tenant. Tenant shall use its architect, engineers and other design professionals, all of whom shall comply with any applicable licensing or governmental requirements of the City of Seattle and the State of Washington; Tenant’s architect shall be approved by Landlord (“Tenant’s Architect”), which approval shall not be unreasonably withheld, conditioned or delayed. Landlord shall also be entitled to receive a copy of the agreement between Tenant and Tenant’s Architect (the “Architect Agreement”). Tenant shall cause Tenant’s Architect to prepare a draft space plan (the “Space Plan”) for the Tenant Improvements and shall submit the proposed Space Plan to Landlord for the latter’s approval (not to be unreasonably withheld) in a time period to allow Tenant to timely complete its Tenant Improvements under this Lease. Landlord shall deliver to Tenant any written objections, questions or comments of Landlord with regard to the Space Plan within ten (10) business days of receipt; Landlord’s consent thereto shall be deemed given if not denied in writing within said ten (10) business day period. If Landlord denies its approval, it shall specify the reasons for doing so in detail. Tenant shall cause the Space Plan to be revised to address such written comments and shall resubmit said Space Plan to Landlord for approval. Such process shall continue until Landlord has approved the Space Plan. Tenant’s Architect shall then prepare working drawings and specifications for the Tenant Improvements, including architectural, structural, plumbing, mechanical, electrical, and fire protection drawings as required, suitable for permit application (the “Working Drawings”) and shall submit the proposed Working Drawings to Landlord for the latter’s approval in a time period to allow Tenant to timely complete its Tenant Improvements under this Lease. The Space Plan and Working Drawings shall be subject to Landlord’s approval, which Landlord agrees shall not be unreasonably withheld, conditioned, or delayed. Landlord shall not be deemed to have acted unreasonably if it withholds its approval thereof because, in Landlord’s reasonable opinion, the work, as described in any such item: (i) is likely to adversely affect Building Systems, the structure of the Building or the safety of the Building and/or their occupants; (ii) might impair Landlord’s ability to furnish services to Tenant or other tenants in the Building; (iii) would materially increase the cost of operating the Building; (iv) would violate any governmental laws, rules or ordinances (or interpretations thereof); (v) contains or uses hazardous or toxic materials or substances; (vi) would negatively affect the appearance of the Building; (vii) is reasonably likely to adversely affect another tenant’s premises; or (viii) is prohibited by any ground lease affecting the Building or any mortgage, trust deed or other instrument encumbering the Building. Landlord shall deliver to Tenant any written objections, questions or comments of Landlord with regard to the Working Drawings, within ten (10) business days of Landlord’s receipt of the Working Drawings; Landlord’s consent thereto shall be deemed given if not denied in writing within said ten (10) business day period. If Landlord denies its approval, it shall specify the reasons for doing so in detail. Tenant shall cause the Working Drawings to be revised to address such written comments and shall resubmit said Working Drawings to Landlord for approval. Landlord may, when approving the Tenant Improvement Plans, elect to require Tenant to remove any Non-Standard Improvements which are made to the Premises. If Landlord so elects, Tenant shall, at its own cost, restore the Premises to the condition designated by Landlord in its election, before the last day of the Term. Such process shall continue until both parties have approved the Working Drawings. Landlord’s approval of the Space Plan and/or the Working Drawings shall not be deemed any representation or warranty that the same comply with applicable codes.
PARKING RULES AND REGULATIONS The following rules and regulations govern the use of the parking facilities which serve the Building. Tenant will be bound by such rules and regulations and agrees to cause its employees, subtenants, assignees, contractors, suppliers, customers and invitees to observe the same: 1. Tenant will not permit or allow any vehicles that belong to or are controlled by Tenant or Tenant’s employees, subtenants, customers or invitees to be loaded, unloaded or parked in areas other than those designated by Landlord for such activities. No vehicles are to be left in the parking areas overnight and no vehicles are to be parked in the parking areas other than normally sized passenger automobiles, motorcycles and pick-up trucks. No extended term storage of vehicles is permitted. 2. Vehicles must be parked entirely within painted stall lines of a single parking stall. 3. All directional signs and arrows must be observed. 4. The speed limit within all parking areas shall be five (5) miles per hour. 5. Parking is prohibited: (a) in areas not striped for parking; (b) in aisles or on ramps; (c) where “no parking” signs are posted; (d) in cross-hatched areas; and (e) in such other areas as may be designated from time to time by Landlord or Landlord’s parking operator. 6. Landlord reserves the right, without cost or liability to Landlord, to tow any vehicle if such vehicle’s audio theft alarm system remains engaged for an unreasonable period of time. 7. Washing, waxing, cleaning or servicing of any vehicle in any area not specifically reserved for such purpose is prohibited. 8. Landlord may refuse to permit any person to park in the parking facilities who violates these rules with unreasonable frequency, and any violation of these rules shall subject the violator’s car to removal, at such car owner’s expense. Tenant agrees to use its best efforts to acquaint its employees, subtenants, assignees, contractors, suppliers, customers and invitees with these parking provisions, rules and regulations. 9. Parking stickers, access cards, or any other device or form of identification supplied by Landlord as a condition of use of the parking facilities shall remain the property of Landlord. Parking identification devices, if utilized by Landlord, must be displayed as requested and may not be mutilated in any manner. The serial number of the parking identification device may not be obliterated. Parking identification devices, if any, are not transferable and any device in the possession of an unauthorized holder will be void. Landlord reserves the right to refuse the sale of monthly stickers or other parking identification devices to Tenant or any of its agents, employees or representatives who willfully refuse to comply with these rules and regulations and all unposted city, state or federal ordinances, laws or agreements. 10. Loss or theft of parking identification devices or access cards must be reported to the management office in the Development immediately, and a lost or stolen report must be filed by the Tenant or user of such parking identification device or access card at the time. Landlord has the right to exclude any vehicle from the parking facilities that does not have a parking identification device or valid access card. Any parking identification device or access card which is reported lost or stolen and which is subsequently found in the possession of an unauthorized person will be confiscated and the illegal holder will be subject to prosecution. 11. All damage or loss claimed to be the responsibility of Landlord must be reported, itemized in writing and delivered to the management office located within the Development within ten (10) business days after any claimed damage or loss occurs. Any claim not so made is waived. Landlord is not responsible for damage by water or fire, or for the acts or omissions of others, or for articles left in vehicles. In any event, the total liability of Landlord, if any, is limited to Two Hundred Fifty Dollars ($250.00) for all damages or loss to any car. Landlord is not responsible for loss of use.
Project Work Plan The Statement of Work is the formal document incorporated into the Grant. The Project Work Plan documents how the Grantee will achieve the performance measures outlined in the Grant. Changes to the Statement of Work require an amendment. Project Work Plans may be changed with written approval from PEI and the Grantee.
Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.
Approval of Plans and Specifications The Plans and Specifications will conform to the requirements and conditions set out by applicable law or any effective restrictive covenant, and to all governmental authorities which exercise jurisdiction over the Leased Premises or the construction thereon.
BUILDING RULES AND REGULATIONS The following rules and regulations shall apply, where applicable, to the Premises, the Building, the parking facilities (if any), the Property and the appurtenances. In the event of a conflict between the following rules and regulations and the remainder of the terms of the Lease, the remainder of the terms of the Lease shall control. Capitalized terms have the same meaning as defined in the Lease.
Construction Progress Schedule A schedule indicating proposed activity sequences and durations, milestone dates for receipt and approval of pertinent information, preparation, submittal, and processing of Shop Drawings and Samples, delivery of materials or equipment requiring long-lead time procurement, and proposed date(s) of Material Completion and Occupancy and Final Completion. The schedule will be developed to represent the sixteen or seventeen CSI Specification Divisions. It shall have a minimum number of activities as required to adequately represent to Owner the complete scope of work and define the Project’s critical path and associated activities. If the Project is to be phased, then each individual Phase should be identified from start through completion of the overall Project and should be individually scheduled and described, including any Owner’s occupancy requirements and showing portions of the Project having occupancy priority. The format of the schedule will have dependencies indicated on a monthly grid identifying milestone dates such as construction start, phase construction, structural top out, dry-in, rough-in completion, metal stud and drywall completion, equipment installation, systems operational, Material Completion and Occupancy Date, final inspection dates, Punchlist, and Final Completion date.
