Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, DPI may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office.
2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of DPI’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of DPI’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to DPI’s demarcation point associated with DPI’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1.
2.8.6.3 DPI is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected by a BellSouth technician to a cross-connect panel within the BellSouth RT/cross-box and shall allow DPI’s sub-loops to be placed on the USLC and transported to DPI’s collocation space at a DS1 level.
Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Money To Go may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office.
2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of Money To Go’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of Money To Go’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal (RT) site with the SWC is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to Money To Go’s demarcation point associated with Money To Go’s collocation space within the SWC that serves the RT. USLC service is offered with or without concentration and with or without a protection DS1.
2.8.6.3 Money To Go is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected, by a BellSouth technician, to a cross-connect panel within the BellSouth RT/cross-box and shall allow Money To Go’s sub-loops to be placed on the USLC and transported to Money To Go’s collocation space at a DS1 level.
Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Lightyear may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office.
2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of Lightyear’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of Lightyear’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to Lightyear’s demarcation point associated with Lightyear’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1.
2.8.6.3 Lightyear is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected, by a BellSouth technician, to a cross-connect panel within the BellSouth RT/cross-box and shall allow Lightyear’s sub-loops to be placed on the USLC and transported to Lightyear’s collocation space at a DS1 level.
Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Louisville Telephone may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office.
2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of Louisville Telephone’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of Louisville Telephone’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to Louisville Telephone’s demarcation point associated with Louisville Telephone’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1.
Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Symtelco may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office.
2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of Symtelco’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of Symtelco’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to Symtelco’s demarcation point associated with Symtelco’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1.
2.8.6.3 Symtelco is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected by a BellSouth technician to a cross-connect panel within the BellSouth RT/cross-box and shall allow Symtelco’s sub-loops to be placed on the USLC and transported to Symtelco’s collocation space at a DS1 level.
Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Global Connection may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office.
2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of Global Connection’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of Global Connection’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to Global Connection’s demarcation point associated with Global Connection’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1.
2.8.6.3 Global Connection is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected, by a BellSouth technician, to a cross-connect panel within the BellSouth RT/cross-box and shall allow Global Connection’s sub-loops to be placed on the USLC and transported to Global Connection’s collocation space at a DS1 level.
Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Talk America may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office.
2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of Talk America’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of Talk America’s sub- loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to Talk America’s demarcation point associated with Talk America’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1.
2.8.6.3 Talk America is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected, by a BellSouth technician, to a cross-connect panel within the BellSouth RT/cross-box and shall allow Talk America’s sub-loops to be placed on the USLC and transported to Talk America’s collocation space at a DS1 level.
Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Comm South may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office.
2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of Comm South’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of Comm South’s sub- loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to Comm South’s demarcation point associated with Comm South’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1.
2.8.6.3 Comm South is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected, by a BellSouth technician, to a cross-connect panel within the BellSouth RT/cross-box and shall allow Comm South’s sub-loops to be placed on the USLC and transported to Comm South’s collocation space at a DS1 level.
Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Xxxx Communications may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office.
2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of Xxxx Communications’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of Xxxx Communications’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to Xxxx Communications’s demarcation point associated with Xxxx Communications’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1.
2.8.6.3 Xxxx Communications is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected by a BellSouth technician to a cross-connect panel within the BellSouth RT/cross-box and shall allow Xxxx Communications’s sub-loops to be placed on the USLC and transported to Xxxx Communications’s collocation space at a DS1 level.
Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, <<customer_name>> may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office.
2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of <<customer_name>>’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of <<customer_name>>’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to the <<customer_name>>’s demarcation point associated with <<customer_name>>’s collocation space within the SWC that serves the RT. USLC service is offered with or without concentration and with or without a protection DS1.
2.8.6.3 <<customer_name>> is required to deliver its sub-loops to its own cross-box, remote terminal (RT), or other similar device and deliver a single cable to the BellSouth RT. This cable shall connected, by a BellSouth technician, to a cross- connect panel within the BellSouth RT/cross-box and shall allow <<customer_name>>’s sub-loops to be placed on the ULSC and transported to <<customer_name>>’s collocation space at a DS1 level.
