Ventilation system Sample Clauses

Ventilation system. 3.1. The interface between the trolley and the ventilation system should be solid, rigid and flat. The ventilation device is part of the trolley and not of the impactor as supplied by the manufacturer. Geometrical characteristics of the ventilation device shall be according to Figure 9.
Sample 1Sample 2Sample 3See All (8)
AutoNDA by SimpleDocs
Ventilation system. (a) For sufficient and proper air ventilation in the form of 24V DC, 200 mm cabin fan (12 Nos. Min) shall be provided on each side pillar on both sides of the bus. Further the drivers cab shall be fitted with a 24V DC, 200 mm diameter fan mounted at proper height on side structure. The colour of fan shall match the interior decor of the bus.
Sample 1
Ventilation system. The Company agrees to improve the ventilation system by, first, insuring that the ventilation fan is turned on whenever the Argon gas is turned on and, second, equipping the portable fan with wheels, a canopy, etc. to insure its convenient use.
Sample 1
Ventilation system. 5 Control System. .6 Electrical System. END OF SECTION Bid Opportunity No. 1008-2015 GENERAL COMMISSIONING REQUIREMENTS Transcona Centennial Pool, Phase 1B Page 1 of 16
Sample 1
Ventilation system. General The planning and execution of the below ventilation systems will follow the valid DIN norms, guidelines and regulations. Mechanical ventilation of the office areas is not planned. Basement rooms The inner basement and storage rooms will get air exhaust systems for simple, hourly air renewal in the rooms. Sanitary facilities and pantries as well as interior-lying rooms Sanitary facilities and pantries as well as interior-lying rooms (IT distributor room, etc.) will be given an air exhaust system. The individual ventilators will be located on the roof of the respective building units or in the rooms and will be controlled by means of switch timers. The air supply will come through a door undercut (1.5 cm - 2.0 cm) or front wall-fire protection elements, as per building code requirements. Telephony sound absorbers will be installed if necessary. Construction project: Office and Administrative Building Zeppelinstrasse/Xxxxxx-Xxxxxxx-Strasse, Bad Homburg BUILDING AND EQUIPMENT SPECIFICATION FOR LEASE AREA WING A Version of 10/25/2007
Sample 1
Ventilation system. The cooling and ventilation system will be upgraded to meet present-day standards for indoor climate.
Sample 1

Related to Ventilation system

  • HEATING The Hirer shall ensure that no unauthorised heating appliances shall be used on the premises when open to the public without the consent of the management committee. Portable Liquefied Propane Gas (LPG) heating appliances shall not be used.

  • HVAC A. Heating, ventilating and air conditioning equipment will be provided with sufficient capacity to accommodate a maximum population density of one (1) person per one hundred fifty (150) square feet of useable floor area served, and a combined lighting and standard electrical load of 3.0 xxxxx per square foot of useable floor area. In the event Tenant introduces into the Premises personnel or equipment which overloads the system’s ability to adequately perform its proper functions, Landlord shall so notify Tenant in writing and supplementary system(s) may be required and installed by Landlord at Tenant’s expense, if within fifteen (15) days Tenant has not modified its use so as not to cause such overload. Operating criteria of the basic system shall not be less than the following:

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.

  • Electrical Provide drawings for the following systems:

  • Water Provide hot water for lavatory purposes and cold water for drinking, lavatory and toilet purposes.

  • Plumbing fixtures and appliances shall be used only for the purposes for which designed, and no sweepings, rubbish, rags or other unsuitable material shall be thrown or deposited therein. Damage resulting to any such fixtures or appliances from misuse by a tenant or its agents, employees or invitees, shall be paid by such tenant.

Time is Money Join Law Insider Premium to draft better contracts faster.