Walls 12 Developer shall provide rustication patterns on all walls, except drainage headwalls, in Aesthetic 13 Area 3 in accordance with Exhibit L2.24 of the LAADCR. The final designs shall resemble these 14 simulations.
Toilet Facilities The Employer provides the Contractor access to toilet facilities. Temporary chemical toilets are provided by the Contractor where deemed necessary.
Heating, Ventilating and Air Conditioning General Office Area: The building shall be equipped with a combination heating, ventilation and air conditioning system. The system shall have ducted supply and return air. The space above the ceiling shall not be used as a supply or return plenum. The systems shall be sized in accordance with the
Exterior and interior functional areas and spaces of the Project, with technical and equipment requirements on each;
Use of Basement and Service Areas The basement(s) and service areas, if any, as located within the
PREMISES DEEMED UNINHABITABLE If the Premises is deemed uninhabitable due to damage beyond reasonable repair the Tenant will be able to terminate this Agreement by written notice to the Landlord. If said damage was due to the negligence of the Tenant, the Tenant shall be liable to the Landlord for all repairs and for the loss of income due to restoring the Premises back to a livable condition in addition to any other losses that can be proved by the Landlord.
Roof Any leaks or evidence of moisture? Yes No Unknown Type of Roof: Age Comments: Is there any existing fire retardant treated plywood? Yes No Unknown Comments:
Visibility 1. Unless the Council of Europe requests or agrees otherwise, the Grantee shall take all necessary measures to publicise the fact that the Action has been funded within the framework of a Joint Project between the European Union and the Council of Europe. Information given to the press and to the beneficiaries of the Action, all related publicity material, official notices, reports and publications, shall acknowledge that the Action was carried out with a grant from a Joint Project between the European Union and the Council of Europe and shall display in an appropriate way the Joint Projects’ visual identity (for instructions on use of the Joint Projects’ visual identity, see Appendix IV).
2. In cases where equipment or major items have been purchased using funds provided by the European Union or the Council of Europe, the Grantee shall indicate this clearly on that equipment and those major items (including display of the European Union and Council of Europe’s logos), provided that such actions do not jeopardise the safety and security of the Grantee’s staff.
3. The acknowledgement and Joint Projects’ visual identity shall be clearly visible in a manner that will not create any confusion regarding the identification of the Acton as a project of the Grantee and the ownership of the equipment and items by the Grantee.
4. All publications by the Grantee pertaining to the Action that have received funding from a Joint Project between the European Union and the Council of Europe, in whatever form and whatever medium, including the Internet, shall carry the following or a similar disclaimer: “This document has been produced using funds of a Joint Project between the European Union and the Council of Europe. The views expressed herein can in no way be taken to reflect the official opinion of the European Union or the Council of Europe”.
5. If the equipment purchased with a grant from a Joint Project is not transferred to the local partners of the Grantee or to the final recipient of the Action at the end of the implementation period of this Agreement, the visibility requirements as regards this equipment shall continue to apply between the end of the implementation period of this Agreement and the end of the Joint Project, if the latter lasts longer.
6. All layouts of any communication items prepared by the Grantee are subject to approval with the Contact point within the Council of Europe.
7. The Grantee accepts that the European Union and the Council of Europe may publish in any form and medium, including on their websites, the name and address of the Grantee, the purpose and amount of the grant and, if relevant, the percentage of co-financing.
Landscaping The Owner will, before its plan of subdivision is released for registration, pay to the Town in lieu of planting any trees on the public streets within the plan, the amount shown for the purpose upon Schedule “J”.
Provisioning Line Splitting and Splitter Space 3.8.1 The Data LEC, Voice CLEC or BellSouth may provide the splitter. When CCI or its authorized agent owns the splitter, Line Splitting requires the following: a non- designed analog loop from the serving wire center to the network interface device (NID) at the end user’s location; a collocation cross connection connecting the loop to the collocation space; a second collocation cross connection from the collocation space connected to a voice port; the high frequency spectrum line activation, and a splitter. The loop and port cannot be a loop and port combination (i.e. UNE-P), but must be individual stand-alone network elements. When BellSouth owns the splitter, Line Splitting requires the following: a non designed analog loop from the serving wire center to the network interface device (NID) at the end user’s location with CFA and splitter port assignments, and a collocation cross connection from the collocation space connected to a voice port.
3.8.2 An unloaded 2-wire copper loop must serve the end user. The meet point for the Voice CLEC and the Data LEC is the point of termination on the MDF for the Data LEC's cable and pairs.
3.8.3 The foregoing procedures are applicable to migration to Line Splitting Service from a UNE-P arrangement, BellSouth Retail Voice Service, BellSouth High Frequency Spectrum (CO Based) Line Sharing.
3.8.4 For other migration scenarios to line splitting, BellSouth will work cooperatively with CLECs to develop methods and procedures to develop a process whereby a Voice CLEC and a Data LEC may provide services over the same loop.