Warranty as to Products Sample Clauses

Warranty as to Products. CMC represents and warrants to Cabot that, when delivered to Cabot, the Products and Services will conform in all respects to the specifications then in effect and as then set forth in the materials specified on Schedule A hereto. CMC MAKES NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER WITH RESPECT TO THE PRODUCTS OR SERVICES, WHETHER USED ALONE OR IN COMBINATION WITH OTHER SUBSTANCES, EVEN IF THE PURPOSES OR USES OF SUCH PRODUCTS ARE KNOWN BY CMC.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Warranty as to Products. Davies represents and warrants to Cabot that, when shipped to Cabot or a customer of Cabot, as the case may be, by Davies, the Products will conform in all respects to the specifications then in effect and as then set forth in the materials specified on Schedule A hereto.
Sample 1Sample 2Sample 3
Warranty as to Products. Cabot represents and warrants to CMC that, when shipped to CMC, the Products will conform in all respects to the specifications then in effect and as then set forth in the materials specified on Schedule A and Schedule B hereto. CABOT MAKES NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER WITH RESPECT TO THE PRODUCTS, WHETHER USED ALONE OR IN COMBINATION WITH OTHER SUBSTANCES, EVEN IF THE PURPOSES OR USES OF SUCH PRODUCTS ARE KNOWN BY CABOT.
Sample 1Sample 2
Warranty as to Products. Seller warrants that each Product shall be free from defects and in full conformity with the Specifications for the warranty term. The term of Seller's warranty to Buyer is [ * ] from the date Product is placed in service with the end-user (provided that in no event shall this period [ * ] after the date Seller shipped that Product). [ * ] warranty period set forth above, will not apply for a particular Product if Seller establishes and provides reasonable evidence to Buyer that Buyer or Buyer's dealer has not complied with the Storage Guidelines in Caterpillar document TIBU4855, which is attached hereto as Exhibit D, with respect to that Product, and such failure to comply was the primary cause for the Product failure.
Sample 1
Warranty as to Products. Licensee warrants to Licensor that the Products in connection with which the Trademarks are used shall, at all times, conform to Good Manufacturing Practices (GMPs) and shall conform in all material respects with all laws and regulations applicable in the Territory. Products will be produced, packaged, advertised and distributed consistent with the quality standards applied prior to the Effective Date by Licensor or any of its pre-Effective Date Affiliates to the Products in the Territory and any new Products introduced after the Effective Date of this Agreement shall also be produced and packaged consistent with such quality standards. In the case of new Products which are not confectionery products, such Products shall be produced consistent with the quality standards applied by reputable manufacturers of such products.
Sample 1
Warranty as to Products. Seller warrants that each Product shall be free from defects and in full conformity with the Specifications for the warranty term. The term of Seller’s warranty to Buyer is twelve (12) months from the date Product is placed in service with the end-user (provided that in no event shall this period exceed thirty-six (36) months after the date Seller shipped that Product). The thirty-six (36) month warranty period set forth above, will not apply for a particular Product if Seller establishes and provides reasonable evidence to Buyer that Buyer or Buyer’s dealer has not complied with the Storage Guidelines in Caterpillar document TIBU4855, which is attached hereto as Exhibit D, with respect to that Product, and such failure to comply was the primary cause for the Product failure.
Sample 1
Warranty as to Products. Licensee warrants to Licensor that the Products in connection with which the Trademarks are used shall, at all times, conform to Good Manufacturing Practices (GMPs) and shall conform in all material respects with all laws and regulations applicable. Products will be produced, packaged, advertised and distributed consistent with the quality standards applied prior to the Original Effective Date by Licensor or any of its pre-Original Effective Date Affiliates to the Products in the Territory and consistent with the quality standards applied prior to the Effective Date by Licensor or any of its pre-Effective Date Affiliates to the products outside the Territory. Any new Products introduced in the Territory after the Original Effective Date or introduced outside of the Territory after the Effective Date shall also be produced and packaged consistent respectively with such quality standards. In the case of new Products which are not confectionery products, such Products shall be produced consistent with the quality standards applied by reputable manufacturers of such products.
Sample 1
AutoNDA by SimpleDocs

Related to Warranty as to Products

  • Other Products and Services As our customer, you have access to a suite of financial products and services availed by ourselves, our affiliates and strategic partners designed to help you address and achieve your financial needs and goals. You agree that you can obtain information about such Products and Services via our website xxx.xxxxxxxx.xxx.xx and you further agree that we can from time to time communicate information in relation to such Products or Services to you specifically or generally to all cardmembers via such communication mode as we consider appropriate.

  • Products and Services General Information

  • Additional Products and Services Subject to the allocation of funds, the CPO may add similar equipment, supplies, services, or locations, within the scope of this Agreement, to the list of equipment, supplies, services, or locations to be performed or provided by giving written notification to Contractor. For purposes of this Section, the “Effective Date” means the date specified in the notification from the CPO. As of the Effective Date, each item added is subject to this Agreement, as if it had originally been a part, but the charge for each item starts to accrue only on the Effective Date. In the event the additional equipment, supplies, services, or locations are not identical to the items(s) already under this Agreement, the charges therefor will then be Contractor’s normal and customary charges or rates for the equipment, supplies, services, or locations classified in the Fees and Costs (Exhibit “F”).

  • Manufacturer Warranties Prior to the transfer to the Interconnected Transmission Owner of title to the Transmission Owner Interconnection Facilities built by the Interconnection Customer, the Interconnection Customer shall produce documentation satisfactory to the Interconnected Transmission Owner evidencing the transfer to the Interconnected Transmission Owner of all manufacturer warranties for equipment and/or materials purchased by the Interconnection Customer for use and/or installation as part of the Transmission Owner Interconnection Facilities built by the Interconnection Customer.

  • Third Party Products and Services Any third-party hardware, software and/or services that is delivered by ResMed for use either standalone or in conjunction with ResMed products and/or services, shall be subject to the third-party terms and conditions and/or license agreements between Customer and the third party. Such third-party hardware, software and/or services is provided by ResMed "AS IS," without any warranty of any kind. Any representations or warranties as to such hardware, software and/or services shall only be as granted by the applicable third parties, if any, that accompany such products and/or software and/or services. Any representations, warranties, or other similar obligations with respect to such third-party hardware, software and/or services flow directly from the third party to Customer and ResMed shall have no responsibility at all for any such representations, warranties, obligations or lack thereof.

  • Manufacturer’s Warranties If a Lease Vehicle is covered by a Manufacturer’s warranty, the Lessee, during the Vehicle Term for such Lease Vehicle, shall have the right to make any claims under such warranty that the Lessor could make.

  • Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.

  • Goods and Services 4.3.1. The Supplier shall ensure that the Goods and/or the Services provided are fit for the purposes that may reasonably be inferred from the technical specifications and in accordance with the timetable for performance defined in the Contract. In any event the Supplier commits himself to achieve performance and results stipulated in the Contract. 4.3.2. The Goods and/or Services shall be delivered in a state of full completion with the complete “Documentation” (any operation and maintenance manuals, drawings, calculations, technical data, logic diagrams, progress reports, quality documentation, conformity certificates, test reports, bill of lading, certificates of origin, export control classification list number as per any applicable export regulation - such as the European Council Regulation 428/2009 (as amended) and/or the U.S. Export Administration Regulations (“EAR”), percentage of U.S. origin content, U.S. Export Control Classification Number (“ECCN”) or U.S. Munitions List category (“USML”) (if applicable) export authorizations and licenses, Harmonized Tariff Code - and any such other documents required under the Contract and/or applicable Laws) associated therewith as well as all instructions, recommendationsandother indicationsnecessaryin orderfor themtobeused correctly and under the appropriate safety conditions. If so required by the Purchaser, the Supplier shall submit any such Documentation to the Purchaserwith sufficient timeforreview andapproval by the Customer, in accordancewith the time-lines agreed between the Purchaser and the Customer. Where the Documentation provided by the Supplier is not compliant with Purchaser’s contractual requirements, the Supplier must make the necessary modifications, and indemnify the Purchaser for any costs, liabilities or penalties incurred by the Purchaser as a result of the non-compliance and/or delay. 4.3.3. Goods or Services that donotmeetall the requirements set in this Article 4.3 shall be considered as having a Non-Conformity as per Article 10 of these General Conditions and may be recorded as a non-conformity event (NCE) as defined in the Supplier Quality Manual. 4.3.4. If the Supplier is not certain that the results of the Services or Goods comply with the requirements defined in this Article 4.3, it shall inform immediately the Purchaser thereof in writing, providing all the needed indications concerning the risks of non- compliance and the measures that the Supplier intends to take in order to remedy the situation. The Purchaser shall notify its acceptance or rejection of the Supplier’s proposals as soon as possible and in writing. 4.3.5. If the Purchaser assesses on its part that the Supplier is not performing the Services and/or supplying the Goods in accordance with the Contract, itmay require the Supplier to indicate to it, in writing, the measures that the Supplier intends to take to remedy the situation. The Purchaser shall notify the Supplier in writing as soon as possible of its acceptance or rejection of the Supplier’s proposals.

  • Supply of Products ‌‌ 3.1 The Supplier warrants that the Products shall: (a) correspond with their description and any applicable Product Specification; (b) conform in all respects with the Order and any relevant sample; (c) be of satisfactory quality and fit for any purpose held out by the Supplier or made known to the Supplier by Ornua, expressly or by implication, and in this respect Ornua relies on the Supplier's skill and judgement; (d) be manufactured by properly trained and qualified personnel using all reasonable skill, care and diligence and in a good and workmanlike manner;‌ (e) where they are manufactured products, be free from defects in design, materials and workmanship and remain so for the period set out in the Product Specification or, if none is specified, for at least 12 months after delivery; (f) comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Products;‌ (g) comply with all relevant standards including any UK Standards, European Standards or International Standards applicable in the UK and the country or State where the Products are to be used; and (h) in the case of Products containing food stuffs, when delivered to Ornua, comply with all applicable food and hygiene legislation and regulations and best industry practice.‌ 3.2 The Supplier shall ensure that at all times it has and maintains all licences, permissions, authorisations, consents and permits needed to carry out its obligations under the Contract in respect of the supply of Products. Breach of this Condition shall be deemed a material breach of the Contract. 3.3 Ornua may inspect and test the Products at any time before delivery. The Supplier shall remain fully responsible for the Products despite any such inspection or testing and any such inspection or testing shall not reduce or otherwise affect the Supplier's obligations under the Contract. 3.4 If following such inspection or testing Ornua considers that the Products do not comply or are unlikely to comply with the Supplier's undertakings at clause 3.1, Ornua shall inform the Supplier and the Supplier shall immediately take such remedial action as is necessary to ensure compliance.‌ 3.5 Ornua may conduct further inspections and tests after the Supplier has carried out its remedial actions.

  • Manufacturer’s Warranty The Goods include the manufacturer’s standard limited parts warranty to replace defective parts covered under such warranty exclusive of labor. Labor is warranted by the Elevator Contractor for 90 days following installation. The manufacturer’s parts warranty may require that the Goods be maintained throughout the warranty period by an authorized manufacturer’s representative under a separate maintenance contract. Any warranty is conditioned on written notice to the Elevator Contractor within warranty period and contingent upon receipt of final payment to Elevator Contractor.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!