Common use of Wide Area Network Clause in Contracts

Wide Area Network. Subject to Section 13.2 (Export) of the Agreement and payment of any applicable Fees, Customer is granted the right to allow its employees to remotely access the Licensed Materials through a wide area network (“ WAN ”). Customer may select the following options for WAN rights at the time of acquiring the Licensed Materials under this Attachment: (I) “None” (no WAN rights permitted), (2) “Local” (WAN rights only permitted within the same time zone as the Designated Equipment, or if outside the Americas, within the same country), (3) “Region” (WAN rights only permitted within the specific Region selected with access through Designated Equipment in the Region). and (4) “Multi-Region” (WAN rights permitted in more than one Region as selected by Customer). Customer’s WAN selection will be determined at time of selection of the Licensed Materials. The available Regions for such Multi-Region WAN rights are: (1) the Americas, (2) Europe and Middle East, (3) India, and (4) Australia and Asia (excluding Japan). The parties hereby agree to the foregoing terms and conditions. By: /s/ Xxxx X. Xxxxxxx By: Name: Xxxx X. Xxxxxxx Name: Xxxxxxxxx X. Xxxxxx Title: CFO Title: Associate General Counsel Date: 12/10/10 Date: Please return originals to: Cadence Design Systems, Inc. Attn: Xxxxxxxxx X. Xxxxxx Associate General Counsel 0000 Xxxxx Xxxxxx San Jose, CA 95134 72010; RET MaskWeaver Base Level *** % 72011: RET Scatter Bar OPC *** % 72014; RET Model-based OPC *** % 72015; RET ModelTuner *** % 72017; RET MaskWeaver MultiThreading *** % 72018; RET MaskWeaver Distributed Processing ModelServer Pack *** % 72019; RET CPL Gate Mask Synthesis *** % 72020; Virtuoso Phase Designer *** % 72021; RET DDL Gate Mask Synthesis *** % 72023; Virtuoso RET Analyser (VRA) *** % 72024; RET MaskWeaver Hitachi 700 Fracture Option *** % 72025; RET MaskWeaver Hitachi HL-800 Fracture Option *** % 72026; RET MaskWeaver Hitachi HL-950 Fracture Option *** % 72027; RET MaskWeaver VSB1 1 Fracture Option *** % 72030; RET LithoCruiser with GUI Option *** % 72031; RET LithoCruiser without GUI Option *** % 72032; RET LithoCruiser AutoRuleOPC *** % 72034; Virtuoso RET Designer (VRD) *** % 72035; Virtuoso RET Designer -DP (VRD-DP) *** % 72036; Virtuoso RET Verifier *** % 72037; Virtuoso RET Verifier DP (VRV DP) *** % 72039; Virtuoso(R) RET Imager *** % CPS100; Cadence InCyte Chip Estimator L *** % CPS200; Cadence InCyte Chip Estimator XL *** % CPS200UG1; Upgrade from Cadence InCyte Chip Estimator L to XL *** % PA1220; Allegro(R) Design Publisher - XL *** % PA8210; Allegro FPGA System Planner - L *** % PA8215; Allegro FPGA System Planner Two FPGA Option - L *** % PA8610; Allegro FPGA System Planner - XL *** % XX0000XX0; Upgrade from PA8210 to PA8610 *** % PA8610UG2; Upgrade from PA8210 + PA8215 to PA8610 *** % PA8630; Allegro FPGA System Planner - GXL *** % PA8630UG1; Upgrade from PA8610 to PA8630 *** % SLMA-071NPH0629 (“Agreement”) Inphi Corporation (“CUSTOMER”) Xxxx Xxxxxxx 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Ship-To Address: 79% 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Xxxx-To Address: 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Cadence Design Systems, Inc. 0000 Xxxxx Xxxxxx San Jose, CA 94234 Attachment Effective Date: 30-June-11 Attachment Expiry Date: 29-Dec-13 eDAcard PLATINUM eDAcard Activation Period: Activation Period Effective Date 30-Jun-11 Activation Period Expiry date: 22-Dec-13 Termination Date: 29-Dec-13 $ 5,000,000 eDAcard Balance: eDAcard Site(s): Distribution of eDAcard Balance: The following authorized users & specific site(s) will be issued eDAcard(s) as indicated below: Xxxx Xxxxxxx – Xxxxxxxxx Xxxxxxx, XX 00000 $5,000,000 xxxxxxxx@xxxxx-xxxx.xxx eDAcard WAN Premium ***% LOCAL:***% REGION, ***% MULTI-REGION eDAcard Discount Rate: ***% Note: The Licensed Materials may be drawn down at their respective list price less ***% discount except for the Licensed Materials listed in Addendum A. The Licensed Materials Listed in Addendum A may be drawn down at their respective list price less the applicable discount set forth in Addendum A. eDAcard PLATINUM number TBD $ 5,000,000 eDAcard Fees Payment Terms Total Total Fees Due $ 5,000,000 Payment Schedule Additional Ship-To addresses provided by CUSTOMER with estimated percentage expected Use: 0000 Xxxxxxx Xxxxxx Xxxxx 00X, Xxxxx Xxxxx, XX 00000 21% The parties hereby agree to the foregoing terms and conditions In addition to the terms and conditions attached hereto which are hereby incorporated by reference. Inphi Corporation Initials: JSE Cadence Design Systems Confidential Product Quotation 12/23/2010 9:17 AM This Product Quotation Attachment (“ Attachment ”), which is appended to the Software License and Maintenance Agreement referenced on page 1 of this Attachment (“ Agreement ”), contains the terms and conditions for Customer’s Use of Licensed Materials based upon Cadence’s eDAcard Platinum licensing model. This Attachment is a Product Quotation as defined in the Agreement. All capitalized terms not otherwise defined herein shall have the same meaning as ascribed to them in the Agreement. In the event of any conflict between the terms of the Agreement and the terms of this Attachment, the terms of the Agreement shall prevail.

Wide Area Network. Subject to Section 13.2 (“Export”) of the Agreement between the parties hereto and payment of any applicable Fees, Customer is granted the right to allow its employees to remotely access the Licensed Materials through a wide area network (“ “WAN”). The Licensed Materials must be located on Designated Equipment within the same time zone (or Region(s) if Regional WAN ”rights are acquired) as such employees are located and must only be accessed by employees within such time zone or Region(s). Customer may select the following options for WAN rights at the time of acquiring the Licensed Materials under this Attachment: (I1) “None” None (no WAN rights permitted), (2) “Local” Local (WAN rights only permitted within the same time zone as the Designated Equipment, or if outside the Americas, within the same country), (3) “Region” (WAN rights only permitted within the specific Region selected with access through Designated Equipment in the Regionselected). , and (4) “Multi-Region” (WAN rights permitted in more than one Region as selected by Customer). Customer’s WAN selection will be determined at time is specified on page 1 of selection of the Licensed Materialsthis Attachment. The available Regions for such Multi-Region WAN rights are: (1i) the Americas, (2) Europe and Middle East, (3) India, and (4) Asia and Australia and Asia (excluding Japan). The parties hereby agree to the foregoing terms and conditions. By: /s/ Xxxx Xxx X. Xxxxxxx By: /s/ Xxxxxxx X. Xxxxxxxx Name: Xxxx Xxx X. Xxxxxxx Name: Xxxxxxxxx Xxxxxxx X. Xxxxxx Xxxxxxxx Title: CFO Title: VP & Associate General Counsel Date: 12/10/10 6/29/07 Date: 6/29/07 Please return originals to: Cadence Design Systems, Inc. Attn: Xxxxxxxxx Xxxxxxx X. Xxxxxx Xxxxxxxx VP & Associate General Counsel 0000 Xxxxx Xxxxxx San Jose, CA 95134 72010; RET MaskWeaver Base Level *** % 72011: RET Scatter Bar OPC *** % 72014; RET Model-based OPC *** % 72015; RET ModelTuner *** % 72017; RET MaskWeaver MultiThreading *** % 72018; RET MaskWeaver Distributed Processing ModelServer Pack *** % 72019; RET CPL Gate Mask Synthesis *** % 72020; Virtuoso Phase Designer *** % 72021; RET DDL Gate Mask Synthesis *** % 72023; Virtuoso RET Analyser (VRA) *** % 72024; RET MaskWeaver Hitachi 700 Fracture Option *** % 72025; RET MaskWeaver Hitachi HL-800 Fracture Option *** % 72026; RET MaskWeaver Hitachi HL-950 Fracture Option *** % 72027; RET MaskWeaver VSB1 1 Fracture Option *** % 72030; RET LithoCruiser with GUI Option *** % 72031; RET LithoCruiser without GUI Option *** % 72032; RET LithoCruiser AutoRuleOPC *** % 72034; Virtuoso RET Designer (VRD) *** % 72035; Virtuoso RET Designer -DP (VRD-DP) *** % 72036; Virtuoso RET Verifier *** % 72037; Virtuoso RET Verifier DP (VRV DP) *** % 72039; Virtuoso(R) RET Imager *** % CPS100; Cadence InCyte Chip Estimator L *** % CPS200; Cadence InCyte Chip Estimator XL *** % CPS200UG1; Upgrade from Cadence InCyte Chip Estimator L to XL *** % PA1220; Allegro(R) Design Publisher - XL *** % PA8210; Allegro FPGA System Planner - L *** % PA8215; Allegro FPGA System Planner Two FPGA Option - L *** % PA8610; Allegro FPGA System Planner - XL *** % XX0000XX0; Upgrade from PA8210 to PA8610 *** % PA8610UG2; Upgrade from PA8210 + PA8215 to PA8610 *** % PA8630; Allegro FPGA System Planner - GXL *** % PA8630UG1; Upgrade from PA8610 to PA8630 *** % SLMA-071NPH0629 (“Agreement”) Inphi Corporation (“CUSTOMER”) Xxxx Xxxxxxx 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation ShipeDAcard PLATINUM number: TBD Quotation Number: INPH1 101111 DEW Quotation Expiration Date: 15-To Address: 79% 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Xxxx-To Address: 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Cadence Design Systems, Inc. 0000 Xxxxx Xxxxxx San Jose, CA 94234 Attachment Dec-10 Activation Period Effective Date: 3015-June-11 Attachment Dec-10 Activation Period Expiry Date: 299-Dec-13 eDAcard PLATINUM eDAcard Activation Period: Activation Period Effective Date 30-Jun-11 Activation Period Expiry date: 22-Dec-13 Mar-12 Termination Date: 2916-Dec-13 $ 5,000,000 eDAcard Balance: eDAcard Site(s): Mar-12 Distribution of eDAcard Balance: Balance The following authorized users & specific site(sspecific(s) will be issued eDAcard(s) as indicated below: . Xxxx Xxxxxxx – Xxxxxxxxx Xxxxxxxx Xxxxxxx, XX 00000 $5,000,000 250,000 xxxxxxxx@xxxxx-xxxx.xxx eDAcard WAN Premium Premium: ***% LOCAL:***% REGION, LOCAL; ***% REGION; *** MULTI-REGION eDAcard Discount Rate: ***% Note: The Licensed Materials may be drawn down at their respective list price less a ***% discount except for the Licensed Materials listed in Addendum A. The Licensed Materials Listed listed in Addendum A may be drawn down at their respective list price less the applicable discount set forth in Addendum A. eDAcard PLATINUM number number: TBD $ 5,000,000 eDAcard Fees Payment Terms Total Total Fees Due $ 5,000,000 Payment Schedule Additional Ship-To addresses provided by CUSTOMER with estimated percentage expected Use: 0000 Xxxxxxx Xxxxxx Xxxxx 00X, Xxxxx Xxxxx, XX 00000 21% The parties hereby agree to the foregoing terms and conditions In in addition to the terms and conditions attached hereto which are hereby incorporated by reference. Inphi Corporation Initials: JSE Cadence Design Systems Confidential Product Quotation 12/23/2010 9:17 AM 12/7/2010 3:52 PM This Product Quotation Attachment (“ Attachment “Attachment”), which is appended to the Software License and Maintenance Agreement referenced on page 1 of this Attachment (“ Agreement “Agreement”), contains the terms and conditions for Customer’s Use of Licensed Materials based upon Cadence’s eDAcard Platinum licensing model. This Attachment is a Product Quotation as defined in the Agreement. All capitalized terms not otherwise defined herein shall have the same meaning as ascribed to them in the Agreement. In the event of any conflict between the terms of the Agreement and the terms of this Attachment, the terms of the Agreement shall prevail.

Wide Area Network. Subject to Section 13.2 (“Export”) of the Agreement between the parties hereto and payment of any applicable Fees, Customer is granted the right to allow its employees to remotely access the Licensed Materials through a wide area network (“ “WAN”). The Licensed Materials must be located on Designated Equipment within the same time zone (or Region(s) if Regional WAN ”rights are acquired) as such employees are located and must only be accessed by employees within such time zone or Region(s). Customer may select the following options for WAN rights at the time of acquiring the Licensed Materials under this Attachment: (I1) “None” None (no WAN rights permitted), (2) “Local” Local (WAN rights only permitted within the same time zone as the Designated Equipment, or if outside the Americas, within the same country), (3) “Region” (WAN rights only permitted within the specific Region selected with access through Designated Equipment in the Regionselected). , and (4) “Multi-Region” (WAN rights permitted in more than one Region as selected by Customer). Customer’s WAN selection will be determined at time is specified on page 1 of selection of the Licensed Materialsthis Attachment. The available Regions for such Multi-Region WAN rights are: (1i) the Americas, (2) Europe and Middle East, (3) India, and (4) Asia and Australia and Asia (excluding Japan). The parties hereby agree to the foregoing terms and conditions. By: /s/ Xxxx Xxx X. Xxxxxxx By: /s/ Xxxxxxx X. Xxxxxxxx Name: Xxxx Xxx X. Xxxxxxx Name: Xxxxxxxxx Xxxxxxx X. Xxxxxx Xxxxxxxx Title: CFO Title: VP & Associate General Counsel Date: 12/10/10 6/29/07 Date: 6/29/07 Please return originals to: Cadence Design Systems, Inc. Attn: Xxxxxxxxx Xxxxxxx X. Xxxxxx Xxxxxxxx VP & Associate General Counsel 0000 Xxxxx Xxxxxx San Jose, CA 95134 72010; RET MaskWeaver Base Level *** % 72011: RET Scatter Bar OPC *** % 72014; RET Model-based OPC *** % 72015; RET ModelTuner *** % 72017; RET MaskWeaver MultiThreading *** % 72018; RET MaskWeaver Distributed Processing ModelServer Pack *** % 72019; RET CPL Gate Mask Synthesis *** % 72020; Virtuoso Phase Designer *** % 72021; RET DDL Gate Mask Synthesis *** % 72023; Virtuoso RET Analyser (VRA) *** % 72024; RET MaskWeaver Hitachi 700 Fracture Option *** % 72025; RET MaskWeaver Hitachi HL-800 Fracture Option *** % 72026; RET MaskWeaver Hitachi HL-950 Fracture Option *** % 72027; RET MaskWeaver VSB1 1 Fracture Option *** % 72030; RET LithoCruiser with GUI Option *** % 72031; RET LithoCruiser without GUI Option *** % 72032; RET LithoCruiser AutoRuleOPC *** % 72034; Virtuoso RET Designer (VRD) *** % 72035; Virtuoso RET Designer -DP (VRD-DP) *** % 72036; Virtuoso RET Verifier *** % 72037; Virtuoso RET Verifier DP (VRV DP) *** % 72039; Virtuoso(R) RET Imager *** % CPS100; Cadence InCyte Chip Estimator L *** % CPS200; Cadence InCyte Chip Estimator XL *** % CPS200UG1; Upgrade from Cadence InCyte Chip Estimator L to XL *** % PA1220; Allegro(R) Design Publisher - XL *** % PA8210; Allegro FPGA System Planner - L *** % PA8215; Allegro FPGA System Planner Two FPGA Option - L *** % PA8610; Allegro FPGA System Planner - XL *** % XX0000XX0; Upgrade from PA8210 to PA8610 *** % PA8610UG2; Upgrade from PA8210 + PA8215 to PA8610 *** % PA8630; Allegro FPGA System Planner - GXL *** % PA8630UG1; Upgrade from PA8610 to PA8630 *** % SLMA-071NPH0629 (“Agreement”) Inphi Corporation (“CUSTOMER”) Xxxx Xxxxxxx 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation ShipeDAcard PLATINUM number: TBD Quotation Number: INPH1 101111 DEW Quotation Expiration Date: 15-To Address: 79% 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Xxxx-To Address: 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Cadence Design Systems, Inc. 0000 Xxxxx Xxxxxx San Jose, CA 94234 Attachment Dec-10 Activation Period Effective Date: 3015-June-11 Attachment Dec-10 Activation Period Expiry Date: 29-Dec-13 eDAcard PLATINUM eDAcard Activation Period: Activation Period Effective Date 30-Jun-11 Activation Period Expiry date: 22-Dec-13 *** Termination Date: 29-Dec-13 $ 5,000,000 eDAcard Balance: eDAcard Site(s): *** Distribution of eDAcard Balance: Balance The following authorized users & specific site(sspecific(s) will be issued eDAcard(s) as indicated below: . Xxxx Xxxxxxx – Xxxxxxxxx Xxxxxxxx Xxxxxxx, XX 00000 $5,000,000 250,000 xxxxxxxx@xxxxx-xxxx.xxx eDAcard WAN Premium Premium: ***% LOCAL:***% REGION, LOCAL; ***% REGION; *** MULTI-REGION eDAcard Discount Rate: ***% Note: The Licensed Materials may be drawn down at their respective list price less a ***% discount except for the Licensed Materials listed in Addendum A. The Licensed Materials Listed listed in Addendum A may be drawn down at their respective list price less the applicable discount set forth in Addendum A. eDAcard PLATINUM number number: TBD $ 5,000,000 eDAcard Fees Payment Terms Total Total Fees Due $ 5,000,000 Payment Schedule Additional Ship-To addresses provided by CUSTOMER with estimated percentage expected Use: 0000 Xxxxxxx Xxxxxx Xxxxx 00X, Xxxxx Xxxxx, XX 00000 21% The parties hereby agree to the foregoing terms and conditions In in addition to the terms and conditions attached hereto which are hereby incorporated by reference. Inphi Corporation Initials: JSE Cadence Design Systems Confidential Product Quotation 12/23/2010 9:17 AM 12/7/2010 3:52 PM This Product Quotation Attachment (“ Attachment “Attachment”), which is appended to the Software License and Maintenance Agreement referenced on page 1 of this Attachment (“ Agreement “Agreement”), contains the terms and conditions for Customer’s Use of Licensed Materials based upon Cadence’s eDAcard Platinum licensing model. This Attachment is a Product Quotation as defined in the Agreement. All capitalized terms not otherwise defined herein shall have the same meaning as ascribed to them in the Agreement. In the event of any conflict between the terms of the Agreement and the terms of this Attachment, the terms of the Agreement shall prevail.

Wide Area Network. Subject to Section 13.2 (“Export”) of the Agreement between the parties hereto and payment of any applicable Fees, Customer is granted the right to allow its employees to remotely access the Licensed Materials through a wide area network (“ “WAN”). The Licensed Materials must be located on Designated Equipment within the same time zone (or Region(s) if Regional WAN ”rights are acquired) as such employees are located and must only be accessed by employees within such time zone or Region(s). Customer may select the following options for WAN rights at the time of acquiring the Licensed Materials under this Attachment: (I1) “None” None (no WAN rights permitted), (2) “Local” Local (WAN rights only permitted within the same time zone as the Designated Equipment, or if outside the Americas, within the same country), (3) “Region” (WAN rights only permitted within the specific Region selected with access through Designated Equipment in the Regionselected). , and (4) “Multi-Region” (WAN rights permitted in more than one Region as selected by Customer). Customer’s WAN selection will be determined at time is specified on page 1 of selection of the Licensed Materialsthis Attachment. The available Regions for such Multi-Region WAN rights are: (1i) the Americas, (2) Europe and Middle East, (3) India, and (4) Asia and Australia and Asia (excluding Japan). The parties hereby agree to the foregoing terms and conditions. INPHI CORPORATION CADENCE DESIGN SYSTEMS, INC. By: /s/ Xxxx Xxx X. Xxxxxxx By: /s/ Xxxxxxx X. Xxxxxxxx Name: Xxxx Xxx X. Xxxxxxx Name: Xxxxxxxxx Xxxxxxx X. Xxxxxx Xxxxxxxx Title: CFO Title: VP & Associate General Counsel Date: 12/10/10 6/29/07 Date: 6/29/07 Please return originals to: Cadence Design Systems, Inc. Attn: Xxxxxxxxx Xxxxxxx X. Xxxxxx Xxxxxxxx VP & Associate General Counsel 0000 Xxxxx Xxxxxx San Jose, CA 95134 72010; RET MaskWeaver Base Level CONFIDENTIAL MATERIAL REDACTED AND FILED SEPARATELY WITH THE COMMISSION. REDACTED MATERIAL IS MARKED WITH ASTERISKS (“*** % 72011: RET Scatter Bar OPC *** % 72014; RET Model-based OPC *** % 72015; RET ModelTuner *** % 72017; RET MaskWeaver MultiThreading *** % 72018; RET MaskWeaver Distributed Processing ModelServer Pack *** % 72019; RET CPL Gate Mask Synthesis *** % 72020; Virtuoso Phase Designer *** % 72021; RET DDL Gate Mask Synthesis *** % 72023; Virtuoso RET Analyser (VRA) *** % 72024; RET MaskWeaver Hitachi 700 Fracture Option *** % 72025; RET MaskWeaver Hitachi HL-800 Fracture Option *** % 72026; RET MaskWeaver Hitachi HL-950 Fracture Option *** % 72027; RET MaskWeaver VSB1 1 Fracture Option *** % 72030; RET LithoCruiser with GUI Option *** % 72031; RET LithoCruiser without GUI Option *** % 72032; RET LithoCruiser AutoRuleOPC *** % 72034; Virtuoso RET Designer (VRD) *** % 72035; Virtuoso RET Designer -DP (VRD-DP) *** % 72036; Virtuoso RET Verifier *** % 72037; Virtuoso RET Verifier DP (VRV DP) *** % 72039; Virtuoso(R) RET Imager *** % CPS100; Cadence InCyte Chip Estimator L *** % CPS200; Cadence InCyte Chip Estimator XL *** % CPS200UG1; Upgrade from Cadence InCyte Chip Estimator L ”). Product Quotation eDAcard Attachment B to XL *** % PA1220; Allegro(R) Design Publisher - XL *** % PA8210; Allegro FPGA System Planner - L *** % PA8215; Allegro FPGA System Planner Two FPGA Option - L *** % PA8610; Allegro FPGA System Planner - XL *** % XX0000XX0; Upgrade from PA8210 to PA8610 *** % PA8610UG2; Upgrade from PA8210 + PA8215 to PA8610 *** % PA8630; Allegro FPGA System Planner - GXL *** % PA8630UG1; Upgrade from PA8610 to PA8630 *** % the Software License and Maintenance Agreement SLMA-071NPH0629 (“Agreement”) eDAcard PLATINUM number: TBD Quotation Number: INPH1 101111 DEW Quotation Expiration Date: 15-Dec-10 Inphi Corporation (“CUSTOMER”) Inphi Corporation CADENCE DESIGN SYSTEMS, INC. Xxxx Xxxxxxx Ship-To Address: 100% 0000 Xxxxx Xxxxxx 000 X. Xxxxxxxx Xxxxxx Xxxx. , Xxxxx 000 112 S. Xxxxxxxx Xxxxxx Xxxx, Xxxxx 000 Xxx Xxxx, Xxxxxxxxxx 00000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Ship-To Address: 79% 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 XX 00000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Xxxx-To Address: 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Cadence Design Systems, Inc. 0000 Xxxxx Xxxxxx San Jose, CA 94234 XX 00000 Attachment Effective Date: 3015-June-11 Dec-10 Attachment Expiry Date: 29-Dec-13 *** eDAcard PLATINUM eDAcard Activation Period: Activation Period Effective Date 30Date: 15-Jun-11 Dec-10 Activation Period Expiry dateDate: 22-Dec-13 *** Termination Date: 29-Dec-13 $ 5,000,000 *** eDAcard Balance: $250,000 eDAcard Site(s): Distribution of eDAcard Balance: Balance The following authorized users & specific site(sspecific(s) will be issued eDAcard(s) as indicated below: . Xxxx Xxxxxxx – Xxxxxxxxx Xxxxxxxx Xxxxxxx, XX 00000 $5,000,000 250,000 xxxxxxxx@xxxxx-xxxx.xxx eDAcard WAN Premium Premium: ***% LOCAL:***% REGION, LOCAL; ***% REGION; *** MULTI-REGION eDAcard Discount Rate: ***% Note: The Licensed Materials may be drawn down at their respective list price less a ***% discount except for the Licensed Materials listed in Addendum A. The Licensed Materials Listed listed in Addendum A may be drawn down at their respective list price less the applicable discount set forth in Addendum A. eDAcard PLATINUM number number: TBD $ 5,000,000 eDAcard Fees $250,000 Payment Terms Total Total Fees Due $ 5,000,000 250,000 Payment Schedule Additional Ship-To addresses provided by CUSTOMER with estimated percentage expected Use: 0000 Xxxxxxx Xxxxxx Xxxxx 00X, Xxxxx Xxxxx, XX 00000 21% Payment Invoice Date Due Date Total Amount 1 *** *** $*** 2 *** *** $*** 3 *** *** $*** 4 *** *** $*** Total [USD] $*** The parties hereby agree to the foregoing terms and conditions In in addition to the terms and conditions attached hereto which are hereby incorporated by reference. Inphi Corporation Initials: JSE Cadence Design Systems Confidential Product Quotation 12/23/2010 9:17 AM 12/7/2010 3:52 PM Page 1 Production Quotation Terms and Conditions For Floating Pool eDAcard License Model This Product Quotation Attachment (“ Attachment “Attachment”), which is appended to the Software License and Maintenance Agreement referenced on page 1 of this Attachment (“ Agreement “Agreement”), contains the terms and conditions for Customer’s Use of Licensed Materials based upon Cadence’s eDAcard Platinum licensing model. This Attachment is a Product Quotation as defined in the Agreement. All capitalized terms not otherwise defined herein shall have the same meaning as ascribed to them in the Agreement. In the event of any conflict between the terms of the Agreement and the terms of this Attachment, the terms of the Agreement shall prevail. A. eDAcard LICENSING MODEL 1. Availability of Licensed Materials: Cadence’s eDAcard licensing model establishes a mechanism whereby Customer may access, select and Use Licensed Materials through Cadence’s web site (“eDAcard Web Site”) during the eDAcard activation period. The activation period is defined as beginning on the Activation Period Effective Date and ending on the Activation Period Expiry Date (“eDAcard Activation Period”) as set forth on page 1 of this Attachment. Use of the Licensed Materials will be pursuant to the terms and conditions of the Agreement and this Attachment. A list of the available Licensed Materials can be viewed on the eDAcard Web Site. The Term of Use for licenses for the Licensed Materials, which includes Maintenance Services, can be selected for a pre-determined duration (i.e. weekly, monthly, quarterly, yearly or any combination thereof). In no event, however, shall the Term of Use for any Licensed Materials licensed during the eDAcard Activation Period extend beyond the Attachment Expiry Date. 2. Licensed Materials: Customer shall only Use Licensed Materials available through the eDAcard Web Site.

Wide Area Network. Subject to Section 13.2 (Export) of the Agreement and payment of any applicable Fees, Customer is granted the right to allow its employees to remotely access the Licensed Materials through a wide area network (“ WAN “WAN”). Customer may select the following options for WAN rights at the time of acquiring the Licensed Materials under this Attachment: (I) “None” (no WAN rights permitted), (2) “Local” (WAN rights only permitted within the same time zone as the Designated Equipment, or if outside the Americas, within the same country), (3) “Region” (WAN rights only permitted within the specific Region selected with access through Designated Equipment in the Region). and (4) “Multi-Region” (WAN rights permitted in more than one Region as selected by Customer). Customer’s WAN selection will be determined at time of selection of the Licensed Materials. The available Regions for such Multi-Region WAN rights are: (1) the Americas, (2) Europe and Middle East, (3) India, and (4) Australia and Asia (excluding Japan). The parties hereby agree to the foregoing terms and conditions. CUSTOMER: INPHI CORPORATION CADENCE DESIGN SYSTEMS, INC. By: /s/ Xxxx X. Xxxxxxx By: Name: Xxxx X. Xxxxxxx Name: Xxxxxxxxx X. Xxxxxx Title: CFO Title: Associate General Counsel Date: 12/10/10 Date: Please return originals to: Cadence Design Systems, Inc. Attn: Xxxxxxxxx X. Xxxxxx Associate General Counsel 0000 Xxxxx Xxxxxx San Jose, CA 95134 Product Quotation eDAcard Platinum (SLMA) 3-22-10 3 CONFIDENTIAL MATERIAL REDACTED AND FILED SEPARATELY WITH THE COMMISSION. REDACTED MATERIAL IS MARKED WITH ASTERISKS (“***”). Addendum A To Attachment B to the Software License and Maintenance Agreement SLMA-071NPHO629 3rd Party & Exception Product(s) Discount(s) 72010; RET MaskWeaver Base Level *** *% 72011: RET Scatter Bar OPC *** *% 72014; RET Model-based OPC *** *% 72015; RET ModelTuner *** *% 72017; RET MaskWeaver MultiThreading *** *% 72018; RET MaskWeaver Distributed Processing ModelServer Pack *** *% 72019; RET CPL Gate Mask Synthesis *** *% 72020; Virtuoso Phase Designer *** *% 72021; RET DDL Gate Mask Synthesis *** *% 72023; Virtuoso RET Analyser (VRA) *** *% 72024; RET MaskWeaver Hitachi 700 Fracture Option *** *% 72025; RET MaskWeaver Hitachi HL-800 Fracture Option *** *% 72026; RET MaskWeaver Hitachi HL-950 Fracture Option *** *% 72027; RET MaskWeaver VSB1 1 Fracture Option *** *% 72030; RET LithoCruiser with GUI Option *** *% 72031; RET LithoCruiser without GUI Option *** *% 72032; RET LithoCruiser AutoRuleOPC *** *% 72034; Virtuoso RET Designer (VRD) *** *% 72035; Virtuoso RET Designer -DP (VRD-DP) *** *% 72036; Virtuoso RET Verifier *** *% 72037; Virtuoso RET Verifier DP (VRV DP) *** *% 72039; Virtuoso(R) RET Imager *** *% CPS100; Cadence InCyte Chip Estimator L *** *% CPS200; Cadence InCyte Chip Estimator XL *** *% CPS200UG1; Upgrade from Cadence InCyte Chip Estimator L to XL *** *% PA1220; Allegro(R) Design Publisher - XL *** *% PA8210; Allegro FPGA System Planner - L *** *% PA8215; Allegro FPGA System Planner Two FPGA Option - L *** *% PA8610; Allegro FPGA System Planner - XL *** *% XX0000XX0; Upgrade from PA8210 to PA8610 *** *% PA8610UG2; Upgrade from PA8210 + PA8215 to PA8610 *** *% PA8630; Allegro FPGA System Planner - GXL *** *% PA8630UG1; Upgrade from PA8610 to PA8630 *** *% Inphi Corporation Initials: JSE 1 of 1 CONFIDENTIAL MATERIAL REDACTED AND FILED SEPARATELY WITH THE COMMISSION. REDACTED MATERIAL IS MARKED WITH ASTERISKS (“***”). Product Quotation eDAcard Attachment C to the Software License and Maintenance Agreement SLMA-071NPH0629 (“Agreement”) eDAcard PLATINUM number: TBD Quotation number: INPH1_101111_DEW Quotation Expiration Date: 31-Dec-10 Inphi Corporation (“CUSTOMER”) Xxxx Xxxxxxx 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Ship-To Address: 79% 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Xxxx-To Address: 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Cadence Design Systems, Inc. 0000 Xxxxx Xxxxxx San Jose, CA 94234 Attachment Effective Date: 30-June-11 Attachment Expiry Date: 29-Dec-13 *** eDAcard PLATINUM eDAcard Activation Period: Activation Period Effective Date 30-Jun-11 Activation Period Expiry date: 22-Dec-13 *** Termination Date: 29-Dec-13 *** $ 5,000,000 eDAcard Balance: eDAcard Site(s): Distribution of eDAcard Balance: The following authorized users & specific site(s) will be issued eDAcard(s) as indicated below: Xxxx Xxxxxxx – Xxxxxxxxx Xxxxxxx, XX 00000 $5,000,000 xxxxxxxx@xxxxx-xxxx.xxx Note: eDAcard WAN Premium ***% LOCAL:***% REGION, ***% MULTI-REGION eDAcard Discount Rate: ***% Note: The Licensed Materials may be drawn down at their respective list price less ***% discount except for the Licensed Materials listed in Addendum A. The Licensed Materials Listed in Addendum A may be drawn down at their respective list price less the applicable discount set forth in Addendum A. eDAcard PLATINUM number TBD eDAcard Fees $ 5,000,000 eDAcard Fees Payment Terms Total Total Fees Due $ 5,000,000 Payment Schedule Payment Invoice Date Due Date Total Amount 1 *** *** $*** 2 *** *** $*** 3 *** *** $*** 4 *** *** $*** 5 *** *** $*** 6 *** *** $*** 7 *** *** $*** 8 *** *** $*** 9 *** *** $*** 10 *** *** $*** Total [USD] $*** Additional Ship-To addresses provided by CUSTOMER with estimated percentage expected Use: 0000 Xxxxxxx Xxxxxx Xxxxx 00X, Xxxxx Xxxxx, XX 00000 21% The parties hereby agree to the foregoing terms and conditions In addition to the terms and conditions attached hereto which are hereby incorporated by reference. Inphi Corporation Initials: JSE Cadence Design Systems Confidential Product Quotation 12/23/2010 9:17 AM Page 16 Product Quotation Terms and Conditions For Floating Pool eDAcard License Model This Product Quotation Attachment (“ Attachment “Attachment”), which is appended to the Software License and Maintenance Agreement referenced on page 1 of this Attachment (“ Agreement “Agreement”), contains the terms and conditions for Customer’s Use of Licensed Materials based upon Cadence’s eDAcard Platinum licensing model. This Attachment is a Product Quotation as defined in the Agreement. All capitalized terms not otherwise defined herein shall have the same meaning as ascribed to them in the Agreement. In the event of any conflict between the terms of the Agreement and the terms of this Attachment, the terms of the Agreement shall prevail. A. eDAcard LICENSING MODEL 1. Availability of Licensed Materials: Cadence’s eDAcard licensing model establishes a mechanism whereby Customer may access, select and Use Licensed Materials through Cadence’s web site (“eDAcard Web Site”) during the eDAcard activation period. The activation period is defined as beginning on the Activation Period Effective Date and ending on the Activation Period Expiry Date (“eDAcard Activation Period”) as set forth on page 1 of this Attachment. Use of the Licensed Materials will be pursuant to the terms and conditions of the Agreement and this Attachment. A list of the available Licensed Materials can be viewed on the eDAcard Web Site. The Term of Use for licenses for the Licensed Materials, which includes Maintenance Services, can be selected for a pre-determined duration (i.e. weekly, monthly, quarterly, yearly or any combination thereof). In no event, however, shall the Term of Use for any Licensed Materials licensed during the eDAcard Activation Period extend beyond the Attachment Expiry Date. 2. Licensed Materials: Customer shall only Use Licensed Materials available through the eDAcard Web Site.

Wide Area Network. Subject to Section 13.2 (Export) of the Agreement and payment of any applicable Fees, Customer is granted the right to allow its employees to remotely access the Licensed Materials through a wide area network (“ WAN ”). Customer may select the following options for WAN rights at the time of acquiring the Licensed Materials under this Attachment: (I1) “None” (no WAN rights permitted), (2) “Local” (WAN rights only permitted within the same time zone as the Designated Equipment, or if outside the Americas, within the same country), (3) “Region” (WAN rights only permitted within the specific Region selected with access through Designated Equipment in the Region). , and (4) “Multi-Region” (WAN rights permitted in more than one Region as selected by Customer). Customer’s WAN selection will be determined at time of selection of the Licensed Materials. The available Regions for such Multi-Region WAN rights are: (1) the Americas, (2) Europe and Middle East, (3) India, and (4) Australia and Asia (excluding Japan). The parties hereby agree to the foregoing terms and conditions. By: /s/ Xxxx X. Xxxxxxx By: Name: Xxxx X. Xxxxxxx Name: Xxxxxxxxx X. Xxxxxx Title: CFO Title: Associate General Counsel Date: 12/10/10 12/22/10 Date: Product Quotation eDAcard Platinum (SLMA) 3-22-10-MA 18 Xxxxx X0, Xxxx Xxxxx Xxxxxxxx Xxxx, Xxxxxxxx, Xxxxxx 0, Xxxxxxx By: Name: Title: Date: Please return originals to: Cadence Design Systems, Inc. Attn: Xxxxxxxxx X. Xxxxxx Associate General Counsel 0000 Xxxxx Xxxxxx San Jose, CA 95134 72010; RET MaskWeaver Base Level *** % 72011: RET Scatter Bar OPC *** % 72014; RET ModelProduct Quotation eDAcard Platinum (SLMA) 3-based OPC *** % 72015; RET ModelTuner *** % 72017; RET MaskWeaver MultiThreading *** % 72018; RET MaskWeaver Distributed Processing ModelServer Pack *** % 72019; RET CPL Gate Mask Synthesis *** % 72020; Virtuoso Phase Designer *** % 72021; RET DDL Gate Mask Synthesis *** % 72023; Virtuoso RET Analyser (VRA) *** % 72024; RET MaskWeaver Hitachi 700 Fracture Option *** % 72025; RET MaskWeaver Hitachi HL-800 Fracture Option *** % 72026; RET MaskWeaver Hitachi HL-950 Fracture Option *** % 72027; RET MaskWeaver VSB1 1 Fracture Option *** % 72030; RET LithoCruiser with GUI Option *** % 72031; RET LithoCruiser without GUI Option *** % 72032; RET LithoCruiser AutoRuleOPC *** % 72034; Virtuoso RET Designer (VRD) *** % 72035; Virtuoso RET Designer -DP (VRD22-DP) *** % 72036; Virtuoso RET Verifier *** % 72037; Virtuoso RET Verifier DP (VRV DP) *** % 72039; Virtuoso(R) RET Imager *** % CPS100; Cadence InCyte Chip Estimator L *** % CPS200; Cadence InCyte Chip Estimator XL *** % CPS200UG1; Upgrade from Cadence InCyte Chip Estimator L to XL *** % PA1220; Allegro(R) Design Publisher - XL *** % PA8210; Allegro FPGA System Planner - L *** % PA8215; Allegro FPGA System Planner Two FPGA Option - L *** % PA8610; Allegro FPGA System Planner - XL *** % XX0000XX0; Upgrade from PA8210 to PA8610 *** % PA8610UG2; Upgrade from PA8210 + PA8215 to PA8610 *** % PA8630; Allegro FPGA System Planner - GXL *** % PA8630UG1; Upgrade from PA8610 to PA8630 *** % SLMA-071NPH0629 10-MA 19 SLMA-07INPH0629 (“Agreement”) Inphi Corporation (“CUSTOMERCustomer”) Xxxx Xxxxxxx Xxx 000 X. Xxxxxxxx Xxxxxx Xxxx. , Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 XX 00000 Inphi Corporation Ship-To Address: 79100% 000 X. Xxxxxxxx Xxxxxx Xxxx. , Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Xxxx-To Address: 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 XX 00000 Cadence Design Systems, Inc. 0000 Xxxxx Xxxxxx San Jose, CA 94234 California 95134 Attachment Effective Date: 3028-June-11 Sep-12 Attachment Expiry Date: 2931-Dec-13 eDAcard PLATINUM eDAcard Activation Period: Activation Period Effective Date 30-Jun-11 Activation Period Expiry date: 22-Dec-13 Termination Attachment Price Book Date: 2927-Dec-13 $ 5,000,000 eDAcard Balance: eDAcard Site(s): Distribution of eDAcard Balance: The following authorized users & specific site(s) will be issued eDAcard(s) as indicated below: Xxxx Xxxxxxx – Xxxxxxxxx Xxxxxxx, XX 00000 $5,000,000 xxxxxxxx@xxxxx-xxxx.xxx eDAcard WAN Premium ***% LOCAL:***% REGION, ***% MULTI-REGION eDAcard Discount Rate: ***% Note: The Licensed Materials may be drawn down at their respective list price less ***% discount except for the Licensed Materials listed in Addendum A. The Licensed Materials Listed in Addendum A may be drawn down at their respective list price less the applicable discount set forth in Addendum A. eDAcard PLATINUM number TBD $ 5,000,000 eDAcard Fees Payment Terms Total Total Fees Due $ 5,000,000 Payment Schedule Additional Ship-To addresses provided by CUSTOMER with estimated percentage expected Use: 0000 Xxxxxxx Xxxxxx Xxxxx 00X, Xxxxx Xxxxx, XX 00000 21% The parties hereby agree to the foregoing terms and conditions In addition to the terms and conditions attached hereto which are hereby incorporated by reference. Inphi Corporation Initials: JSE Cadence Design Systems Confidential Product Quotation 12/23/2010 9:17 AM This Product Quotation Attachment (“ Attachment ”), which is appended to the Software License and Maintenance Agreement referenced on page 1 of this Attachment (“ Agreement ”), contains the terms and conditions for Customer’s Use of Licensed Materials based upon Cadence’s eDAcard Platinum licensing model. This Attachment is a Product Quotation as defined in the Agreement. All capitalized terms not otherwise defined herein shall have the same meaning as ascribed to them in the Agreement. In the event of any conflict between the terms of the Agreement and the terms of this Attachment, the terms of the Agreement shall prevail.Aug-12

Wide Area Network. Subject to Section 13.2 (Export) of the Agreement and payment of any applicable Fees, Customer is granted the right to allow its employees to remotely access the Licensed Materials through a wide area network (“ WAN “WAN”). Customer may select the following options for WAN rights at the time of acquiring the Licensed Materials under this Attachment: (I) “None” (no WAN rights permitted), (2) “Local” (WAN rights only permitted within the same time zone as the Designated Equipment, or if outside the Americas, within the same country), (3) “Region” (WAN rights only permitted within the specific Region selected with access through Designated Equipment in the Region). and (4) “Multi-Region” (WAN rights permitted in more than one Region as selected by Customer). Customer’s WAN selection will be determined at time of selection of the Licensed Materials. The available Regions for such Multi-Region WAN rights are: (1) the Americas, (2) Europe and Middle East, (3) India, and (4) Australia and Asia (excluding Japan). The parties hereby agree to the foregoing terms and conditions. By: /s/ Xxxx X. Xxxxxxx By: Name: Xxxx X. Xxxxxxx Name: Xxxxxxxxx X. Xxxxxx Title: CFO Title: Associate General Counsel Date: 12/10/10 Date: Please return originals to: Cadence Design Systems, Inc. Attn: Xxxxxxxxx X. Xxxxxx Associate General Counsel 0000 Xxxxx Xxxxxx San Jose, CA 95134 72010; RET MaskWeaver Base Level *** *% 72011: RET Scatter Bar OPC *** *% 72014; RET Model-based OPC *** *% 72015; RET ModelTuner *** *% 72017; RET MaskWeaver MultiThreading *** *% 72018; RET MaskWeaver Distributed Processing ModelServer Pack *** *% 72019; RET CPL Gate Mask Synthesis *** *% 72020; Virtuoso Phase Designer *** *% 72021; RET DDL Gate Mask Synthesis *** *% 72023; Virtuoso RET Analyser (VRA) *** *% 72024; RET MaskWeaver Hitachi 700 Fracture Option *** *% 72025; RET MaskWeaver Hitachi HL-800 Fracture Option *** *% 72026; RET MaskWeaver Hitachi HL-950 Fracture Option *** *% 72027; RET MaskWeaver VSB1 1 Fracture Option *** *% 72030; RET LithoCruiser with GUI Option *** *% 72031; RET LithoCruiser without GUI Option *** *% 72032; RET LithoCruiser AutoRuleOPC *** *% 72034; Virtuoso RET Designer (VRD) *** *% 72035; Virtuoso RET Designer -DP (VRD-DP) *** *% 72036; Virtuoso RET Verifier *** *% 72037; Virtuoso RET Verifier DP (VRV DP) *** *% 72039; Virtuoso(R) RET Imager *** *% CPS100; Cadence InCyte Chip Estimator L *** *% CPS200; Cadence InCyte Chip Estimator XL *** *% CPS200UG1; Upgrade from Cadence InCyte Chip Estimator L to XL *** *% PA1220; Allegro(R) Design Publisher - XL *** *% PA8210; Allegro FPGA System Planner - L *** *% PA8215; Allegro FPGA System Planner Two FPGA Option - L *** *% PA8610; Allegro FPGA System Planner - XL *** *% XX0000XX0; Upgrade from PA8210 to PA8610 *** *% PA8610UG2; Upgrade from PA8210 + PA8215 to PA8610 *** *% PA8630; Allegro FPGA System Planner - GXL *** *% PA8630UG1; Upgrade from PA8610 to PA8630 *** *% SLMA-071NPH0629 (“Agreement”) Quotation number: INPH1_101111_DEW Inphi Corporation (“CUSTOMER”) Xxxx Xxxxxxx 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Ship-To Address: 79% 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Xxxx-To Address: 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Cadence Design Systems, Inc. 0000 Xxxxx Xxxxxx San Jose, CA 94234 Attachment Effective Date: 30-June-11 Attachment Expiry Date: 29-Dec-13 *** eDAcard PLATINUM eDAcard Activation Period: Activation Period Effective Date 30-Jun-11 Activation Period Expiry date: 22-Dec-13 *** Termination Date: 29-Dec-13 *** $ 5,000,000 eDAcard Balance: eDAcard Site(s): Distribution of eDAcard Balance: The following authorized users & specific site(s) will be issued eDAcard(s) as indicated below: Xxxx Xxxxxxx – Xxxxxxxxx Xxxxxxx, XX 00000 $5,000,000 xxxxxxxx@xxxxx-xxxx.xxx Note: eDAcard WAN Premium ***% LOCAL:***% REGION, ***% MULTI-REGION eDAcard Discount Rate: ***% Note: The Licensed Materials may be drawn down at their respective list price less ***% discount except for the Licensed Materials listed in Addendum A. The Licensed Materials Listed in Addendum A may be drawn down at their respective list price less the applicable discount set forth in Addendum A. eDAcard PLATINUM number TBD eDAcard Fees $ 5,000,000 eDAcard Fees Payment Terms Total Total Fees Due $ 5,000,000 Payment Schedule Invoice Date Due Date Total Amount 1 *** *** $*** 2 *** *** $*** 3 *** *** $*** 4 *** *** $*** 5 *** *** $*** 6 *** *** $*** 7 *** *** $*** 8 *** *** $*** 9 *** *** $*** 10 *** *** $*** Total [USD] $*** Additional Ship-To addresses provided by CUSTOMER with estimated percentage expected Use: 0000 Xxxxxxx Xxxxxx Xxxxx 00X, Xxxxx Xxxxx, XX 00000 21% The parties hereby agree to the foregoing terms and conditions In addition to the terms and conditions attached hereto which are hereby incorporated by reference. Inphi Corporation Initials: JSE Cadence Design Systems Confidential Product Quotation 12/23/2010 9:17 AM This Product Quotation Attachment (“ Attachment “Attachment”), which is appended to the Software License and Maintenance Agreement referenced on page 1 of this Attachment (“ Agreement “Agreement”), contains the terms and conditions for Customer’s Use of Licensed Materials based upon Cadence’s eDAcard Platinum licensing model. This Attachment is a Product Quotation as defined in the Agreement. All capitalized terms not otherwise defined herein shall have the same meaning as ascribed to them in the Agreement. In the event of any conflict between the terms of the Agreement and the terms of this Attachment, the terms of the Agreement shall prevail.

Wide Area Network. Subject to Section 13.2 (Export) of the Agreement and payment of any applicable Fees, Customer is granted the right to allow its employees to remotely access the Licensed Materials through a wide area network (“ WAN “WAN”). Customer may select the following options for WAN rights at the time of acquiring the Licensed Materials under this Attachment: (I) “None” (no WAN rights permitted), (2) “Local” (WAN rights only permitted within the same time zone as the Designated Equipment, or if outside the Americas, within the same country), (3) “Region” (WAN rights only permitted within the specific Region selected with access through Designated Equipment in the Region). and (4) “Multi-Region” (WAN rights permitted in more than one Region as selected by Customer). Customer’s WAN selection will be determined at time of selection of the Licensed Materials. The available Regions for such Multi-Region WAN rights are: (1) the Americas, (2) Europe and Middle East, (3) India, and (4) Australia and Asia (excluding Japan). The parties hereby agree to the foregoing terms and conditions. By: /s/ Xxxx X. Xxxxxxx By: Name: Xxxx X. Xxxxxxx Name: Xxxxxxxxx X. Xxxxxx Title: CFO Title: Associate General Counsel Date: 12/10/10 Date: Please return originals to: Cadence Design Systems, Inc. Attn: Xxxxxxxxx X. Xxxxxx Associate General Counsel 0000 Xxxxx Xxxxxx San Jose, CA 95134 72010; RET MaskWeaver Base Level *** *% 72011: RET Scatter Bar OPC *** *% 72014; RET Model-based OPC *** *% 72015; RET ModelTuner *** *% 72017; RET MaskWeaver MultiThreading *** *% 72018; RET MaskWeaver Distributed Processing ModelServer Pack *** *% 72019; RET CPL Gate Mask Synthesis *** *% 72020; Virtuoso Phase Designer *** *% 72021; RET DDL Gate Mask Synthesis *** *% 72023; Virtuoso RET Analyser (VRA) *** *% 72024; RET MaskWeaver Hitachi 700 Fracture Option *** *% 72025; RET MaskWeaver Hitachi HL-800 Fracture Option *** *% 72026; RET MaskWeaver Hitachi HL-950 Fracture Option *** *% 72027; RET MaskWeaver VSB1 1 Fracture Option *** *% 72030; RET LithoCruiser with GUI Option *** *% 72031; RET LithoCruiser without GUI Option *** *% 72032; RET LithoCruiser AutoRuleOPC *** *% 72034; Virtuoso RET Designer (VRD) *** *% 72035; Virtuoso RET Designer -DP (VRD-DP) *** *% 72036; Virtuoso RET Verifier *** *% 72037; Virtuoso RET Verifier DP (VRV DP) *** *% 72039; Virtuoso(R) RET Imager *** *% CPS100; Cadence InCyte Chip Estimator L *** *% CPS200; Cadence InCyte Chip Estimator XL *** *% CPS200UG1; Upgrade from Cadence InCyte Chip Estimator L to XL *** *% PA1220; Allegro(R) Design Publisher - XL *** *% PA8210; Allegro FPGA System Planner - L *** *% PA8215; Allegro FPGA System Planner Two FPGA Option - L *** *% PA8610; Allegro FPGA System Planner - XL *** *% XX0000XX0; Upgrade from PA8210 to PA8610 *** *% PA8610UG2; Upgrade from PA8210 + PA8215 to PA8610 *** *% PA8630; Allegro FPGA System Planner - GXL *** *% PA8630UG1; Upgrade from PA8610 to PA8630 *** *% SLMA-071NPH0629 (“Agreement”) Quotation number: INPH1_101111_DEW Inphi Corporation (“CUSTOMER”) Xxxx Xxxxxxx 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Ship-To Address: 79% 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Xxxx-To Address: 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Cadence Design Systems, Inc. 0000 Xxxxx Xxxxxx San Jose, CA 94234 Attachment Effective Date: 30-June-11 Attachment Expiry Date: 29-Dec-13 eDAcard PLATINUM eDAcard Activation Period: Activation Period Effective Date 30-Jun-11 Activation Period Expiry date: 22-Dec-13 Termination Date: 29-Dec-13 $ 5,000,000 eDAcard Balance: eDAcard Site(s): Distribution of eDAcard Balance: The following authorized users & specific site(s) will be issued eDAcard(s) as indicated below: Xxxx Xxxxxxx – Xxxxxxxxx Xxxxxxx, XX 00000 $5,000,000 xxxxxxxx@xxxxx-xxxx.xxx Note: eDAcard WAN Premium ***% LOCAL:***% REGION, ***% MULTI-REGION eDAcard Discount Rate: ***% Note: The Licensed Materials may be drawn down at their respective list price less ***% discount except for the Licensed Materials listed in Addendum A. The Licensed Materials Listed in Addendum A may be drawn down at their respective list price less the applicable discount set forth in Addendum A. eDAcard PLATINUM number TBD eDAcard Fees $ 5,000,000 eDAcard Fees Payment Terms Total Total Fees Due $ 5,000,000 Payment Schedule Invoice Date Due Date Total Amount 1 *** *** $*** 2 *** *** $*** 3 *** *** $*** 4 *** *** $*** 5 *** *** $*** 6 *** *** $*** 7 *** *** $*** 8 *** *** $*** 9 *** *** $*** 10 *** *** $*** Total [USD] $*** Additional Ship-To addresses provided by CUSTOMER with estimated percentage expected Use: 0000 Xxxxxxx Xxxxxx Xxxxx 00X, Xxxxx Xxxxx, XX 00000 21% The parties hereby agree to the foregoing terms and conditions In addition to the terms and conditions attached hereto which are hereby incorporated by reference. Inphi Corporation Initials: JSE Cadence Design Systems Confidential Product Quotation 12/23/2010 9:17 AM This Product Quotation Attachment (“ Attachment “Attachment”), which is appended to the Software License and Maintenance Agreement referenced on page 1 of this Attachment (“ Agreement “Agreement”), contains the terms and conditions for Customer’s Use of Licensed Materials based upon Cadence’s eDAcard Platinum licensing model. This Attachment is a Product Quotation as defined in the Agreement. All capitalized terms not otherwise defined herein shall have the same meaning as ascribed to them in the Agreement. In the event of any conflict between the terms of the Agreement and the terms of this Attachment, the terms of the Agreement shall prevail.

Wide Area Network. Subject to Section 13.2 (“Export”) of the Agreement between the parties hereto and payment of any applicable Fees, Customer is granted the right to allow its employees to remotely access the Licensed Materials through a wide area network (“ “WAN”). The Licensed Materials must be located on Designated Equipment within the same time zone (or Region(s) if Regional WAN ”rights are acquired) as such employees are located and must only be accessed by employees within such time zone or Region(s). Customer may select the following options for WAN rights at the time of acquiring the Licensed Materials under this Attachment: (I1) “None” None (no WAN rights permitted), (2) “Local” Local (WAN rights only permitted within the same time zone as the Designated Equipment, or if outside the Americas, within the same country), (3) “Region” (WAN rights only permitted within the specific Region selected with access through Designated Equipment in the Regionselected). , and (4) “Multi-Region” (WAN rights permitted in more than one Region as selected by Customer). Customer’s WAN selection will be determined at time is specified on page 1 of selection of the Licensed Materialsthis Attachment. The available Regions for such Multi-Region WAN rights are: (1i) the Americas, (2) Europe and Middle East, (3) India, and (4) Asia and Australia and Asia (excluding Japan). The parties hereby agree to the foregoing terms and conditions. By: /s/ Xxxx Xxx X. Xxxxxxx By: /s/ Xxxxxxx X. Xxxxxxxx Name: Xxxx Xxx X. Xxxxxxx Name: Xxxxxxxxx Xxxxxxx X. Xxxxxx Xxxxxxxx Title: CFO Title: VP & Associate General Counsel Date: 12/10/10 6/29/07 Date: 6/29/07 Please return originals to: Cadence Design Systems, Inc. Attn: Xxxxxxxxx Xxxxxxx X. Xxxxxx Xxxxxxxx VP & Associate General Counsel 0000 Xxxxx Xxxxxx San Jose, CA 95134 72010; RET MaskWeaver Base Level *** % 72011: RET Scatter Bar OPC *** % 72014; RET Model-based OPC *** % 72015; RET ModelTuner *** % 72017; RET MaskWeaver MultiThreading *** % 72018; RET MaskWeaver Distributed Processing ModelServer Pack *** % 72019; RET CPL Gate Mask Synthesis *** % 72020; Virtuoso Phase Designer *** % 72021; RET DDL Gate Mask Synthesis *** % 72023; Virtuoso RET Analyser (VRA) *** % 72024; RET MaskWeaver Hitachi 700 Fracture Option *** % 72025; RET MaskWeaver Hitachi HL-800 Fracture Option *** % 72026; RET MaskWeaver Hitachi HL-950 Fracture Option *** % 72027; RET MaskWeaver VSB1 1 Fracture Option *** % 72030; RET LithoCruiser with GUI Option *** % 72031; RET LithoCruiser without GUI Option *** % 72032; RET LithoCruiser AutoRuleOPC *** % 72034; Virtuoso RET Designer (VRD) *** % 72035; Virtuoso RET Designer -DP (VRD-DP) *** % 72036; Virtuoso RET Verifier *** % 72037; Virtuoso RET Verifier DP (VRV DP) *** % 72039; Virtuoso(R) RET Imager *** % CPS100; Cadence InCyte Chip Estimator L *** % CPS200; Cadence InCyte Chip Estimator XL *** % CPS200UG1; Upgrade from Cadence InCyte Chip Estimator L to XL *** % PA1220; Allegro(R) Design Publisher - XL *** % PA8210; Allegro FPGA System Planner - L *** % PA8215; Allegro FPGA System Planner Two FPGA Option - L *** % PA8610; Allegro FPGA System Planner - XL *** % XX0000XX0; Upgrade from PA8210 to PA8610 *** % PA8610UG2; Upgrade from PA8210 + PA8215 to PA8610 *** % PA8630; Allegro FPGA System Planner - GXL *** % PA8630UG1; Upgrade from PA8610 to PA8630 *** % SLMA-071NPH0629 (“Agreement”) Inphi Corporation (“CUSTOMER”) Xxxx Xxxxxxx 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Ship-To Address: 79% 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Inphi Corporation Xxxx-To Address: 000 X. Xxxxxxxx Xxxxxx Xxxx. Xxxxx 000 Xxxxxxxx Xxxxxxx, XX00000 Cadence Design Systems, Inc. 0000 Xxxxx Xxxxxx San Jose, CA 94234 Attachment Activation Period Effective Date: 3015-June-11 Attachment Dec-10 Activation Period Expiry Date: 299-Dec-13 eDAcard PLATINUM eDAcard Activation Period: Activation Period Effective Date 30-Jun-11 Activation Period Expiry date: 22-Dec-13 Mar-12 Termination Date: 2916-Dec-13 $ 5,000,000 eDAcard Balance: eDAcard Site(s): Mar-12 Distribution of eDAcard Balance: Balance The following authorized users & specific site(sspecific(s) will be issued eDAcard(s) as indicated below: . Xxxx Xxxxxxx – Xxxxxxxxx Xxxxxxxx Xxxxxxx, XX 00000 $5,000,000 250,000 xxxxxxxx@xxxxx-xxxx.xxx eDAcard WAN Premium Premium: ***% LOCAL:***% REGION, LOCAL; ***% REGION; *** MULTI-REGION eDAcard Discount Rate: ***% Note: The Licensed Materials may be drawn down at their respective list price less a ***% discount except for the Licensed Materials listed in Addendum A. The Licensed Materials Listed listed in Addendum A may be drawn down at their respective list price less the applicable discount set forth in Addendum A. eDAcard PLATINUM number number: TBD $ 5,000,000 eDAcard Fees Payment Terms Total Total Fees Due $ 5,000,000 Payment Schedule Additional Ship-To addresses provided by CUSTOMER with estimated percentage expected Use: 0000 Xxxxxxx Xxxxxx Xxxxx 00X, Xxxxx Xxxxx, XX 00000 21% The parties hereby agree to the foregoing terms and conditions In in addition to the terms and conditions attached hereto which are hereby incorporated by reference. Inphi Corporation Initials: JSE Cadence Design Systems Confidential Product Quotation 12/23/2010 9:17 AM 12/7/2010 3:52 PM This Product Quotation Attachment (“ Attachment ”), which is appended to the Software License and Maintenance Agreement referenced on page 1 of this Attachment (“ Agreement ”), contains the terms and conditions for Customer’s Use of Licensed Materials based upon Cadence’s eDAcard Platinum licensing model. This Attachment is a Product Quotation as defined in the Agreement. All capitalized terms not otherwise defined herein shall have the same meaning as ascribed to them in the Agreement. In the event of any conflict between the terms of the Agreement and the terms of this Attachment, the terms of the Agreement shall prevail.