Ambient water temperature definition

Ambient water temperature means the spatial (longitudinal, lateral and vertical) and temporal water temperature measured in the receiving body of water prior to a specific waste heat discharge, and is outside the influence of any thermal mixing zone.
Sample 1Sample 2Sample 3

Examples of Ambient water temperature in a sentence

  • Ambient water temperature conditions in the Rogue and Klamath river systems range from 4oC to approximately 24oC.

  • There are two different ways to do this:  Ambient water temperature The concentration of each component in the infiltrated water mass is set equal to the concentration in the ambient sea water.

  • Ambient water temperature is an important factor for aquatic life and can influence other water quality aspects such as dissolved oxygen (the solubility of oxygen decreases as water temperature increases).

  • There are two different ways to do this: ⚫ Ambient water temperature The concentration of each component in the infiltrated water mass is set equal to the concentration in the ambient sea water.

  • Ambient water temperature may exceed the temperature criteria or the applicable site specific standard when the daily maximum air temperature exceeds the 90th percentile value of the daily maximum air temperatures in a given month calculated using at least 10 years of air temperature data.

  • Ambient water temperature of 20oC is sufficient for replication of WSSV, and b.

  • The use of £22,000 of the 2003/04 Health Programme budget to support partnership initiatives aimed at reducing health inequalities, as part of the GLA’s contribution to the London Health Commission work programme.2. The GLA entering into a funding agreement with Health Link for the deliveryof a project which supports delivery of both LHC and18/3/04Jeff JacobsNeale ColemanThe total cost of this project is £22,000 and will be met from the 2003/04 Health Programme budget.

  • Work requires application and modification of established practices in some area of responsibility, with some individual discretion and judgment exercised in emergency situations.

  • Ambient water temperature was lower in 2015 than previous years because sampling occurred from mid-September through mid-November instead of the typical mid-July through October sampling period.

  • Such risks, uncertainties, contingencies and other important factors could cause the actual results, performance or achievements of the Toyota Companies or industry results to differ materially from those results expressed or implied in this presentation by such forward-looking statements.

Related to Ambient water temperature

  • Ambient air means that portion of the atmosphere, external to buildings, to which the general public has access.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Ballast water means water with its suspended matter taken on board a ship to control trim, list, draught, stability or stresses of the ship.

  • Potable means water suitable for drinking by the public.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Invasive plant species means species of plants not historically found in California that spread outside cultivated areas and can damage environmental or economic resources. Invasive species may be regulated by county agricultural agencies as noxious species. Lists of invasive plants are maintained at the California Invasive Plant Inventory and USDA invasive and noxious weeds database.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • CO2 means carbon dioxide.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Vapor tight means equipment that allows no loss of vapors. Compliance with vapor-tight requirements can be determined by checking to ensure that the concentration at a potential leak source is not equal to or greater than 100 percent of the lower explosive limit (LEL) when measured with a combustible gas detector, calibrated with propane, at a distance of 1 inch (2.54 cm) from the source.

  • Filtration means a process for removing particulate matter from water by passage through porous media.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Pressure means the total load or force per unit area acting on a surface.

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.