Applicable emission limit definition

Applicable emission limit means an emission limit to which an engine is subject;
Applicable emission limit means an emission limit to which an engine is subject to for approval;

Examples of Applicable emission limit in a sentence

  • Applicable emission limit from 326 IAC 8 in pounds of VOC per gallon of coating.

  • This equivalency was determined by the following equation: E = L / (1 - (L/D)) WhereL= Applicable emission limit from 326 IAC 8 in pounds of VOC per gallon of coatingD= Density of VOC in coating in pounds per gallon of VOCE= Equivalent emission limit in pounds of VOC per gallon of coating solids as applied Actual solvent density shall be used to determine compliance of surface coating operation using the compliance methods in 326 IAC 8-1-2(a).

  • The equivalent emission limit shall be established by the following equation: where: =A = Allowable equivalent emission limit, in kg of VOC/l (lb of VOC/gal) of coating solids, as applied.E = Applicable emission limit as specified in section 3.1, in kg of VOC/l (lb of VOC/gal) of coating, excluding water and exempt solvent, as applied.S = Solids volume fraction representative of a compliance coating, in liter (gallon) of solids per liter (gallon) of coating, excluding water and exempt solvents, as applied.

  • This equivalency was determined by the following equation: E = L / (1 - (L/D))Where:L = Applicable emission limit from 326 IAC 8 in pounds of VOC per gallon of coating;D = Density of VOC in coating in pounds per gallon of VOC;E = Equivalent emission limit in pounds of VOC per gallon of coating solids as applied.

  • The equivalency was determined by the following equation: E = L / (1 - (L/D))= 1.7 / (1 – (1.7 / 7.36)) = 2.21 lbs VOC/gal coating solids Where:L= Applicable emission limit from 326 IAC 8 in pounds of VOC per gallon of coating less water; D= Density of VOC in coating in pounds per gallon of VOC (lbs/gal) as applied; and E= Equivalent emission limit in pounds of VOC per gallon of coating solids as applied.

Related to Applicable emission limit

  • emission limit value means the mass, expressed in terms of certain specific parameters, concentration and/or level of an emission, which may not be exceeded during one or more periods of time;

  • Emission limitation means a requirement established by the Board, the director or the Administrator, EPA, which limits the quantity, rate or concentration of emission of air pollutants on a continuous emission reduction including any requirement relating to the operation or maintenance of a source to assure continuous emission reduction (Section 302(k)).

  • Lowest achievable emission rate (LAER) means for any source, that rate of emissions which reflects the most stringent emission limitation which is contained in the implementation plan of any State for such class or category of source, unless the owner or operator of the proposed source demonstrates that such limitations are not achievable, or the most stringent emission limitation which is achieved in practice by such class or category of source, whichever is more stringent. In no event shall the application of this term permit a proposed new or modified source to emit any pollutant in excess of the amount allowable under applicable New Source Standards of Performance.

  • Lowest Achievable Emission Rate (LAER) means, for any source, the more stringent rate of emissions based on the following:

  • Applicable ECF Percentage means, for any fiscal year, (a) 50% if the Total Leverage Ratio as of the last day of such fiscal year is greater than or equal to 6.00 to 1.00, (b) 25% if the Total Leverage Ratio as of the last day of such fiscal year is less than 6.00 to 1.00 but greater than or equal to 5.00 to 1.00 and (c) 0% if the Total Leverage Ratio as of the last day of such fiscal year is less than 5.00 to 1.00.

  • Defined Contribution Dollar Limitation means, for any Limitation Year, $46,000, as adjusted for increases in the cost-of-living under Code section 415(d). If a short Limitation Year is created because of a Plan amendment changing the Limitation Year to a different 12-consecutive month period, the Defined Contribution Dollar Limitation for the short Limitation Year will not exceed the amount determined in the preceding sentence multiplied by a fraction, the numerator of which is the number of months in the short Limitation Year and the denominator of which is 12.

  • Method detection limit means the minimum concentration of a hazardous substance that can be measured and reported with 99% confidence that the analyte concentration is greater than zero and is determined from analysis of a sample in a given matrix that contains the analyte.

  • Possession limit as used in s. NR 19.275, means the maximum number of a turtle species or group of turtle species which may be possessed by a person at any time.

  • Available RP Capacity Amount means (i) the amount of Restricted Payments that may be made at the time of determination pursuant to Sections 7.06(d), (g), (h) and (l) minus (ii) the sum of the amount of the Available RP Capacity Amount utilized by the Borrower or any Restricted Subsidiary to (A) make Restricted Payments in reliance on Sections 7.06 (g), (h) or (l), (B) incur Liens pursuant to Section 7.01(bb), (C) make Investments pursuant to Section 7.02(n), (D) incur Indebtedness pursuant to Section 7.03(y) and (E) make prepayments, redemptions, purchases, defeasances and other payments in respect of Junior Financings prior to their scheduled maturity utilizing the Available RP Capacity Amount pursuant to Section 7.13 plus (iii) the aggregate principal amount of Indebtedness prepaid prior to or substantially concurrently at such time, solely to the extent such Indebtedness (A) was secured by Liens pursuant to Section 7.01(bb) or (B) was incurred pursuant to Section 7.03(y) and not secured pursuant to Section 7.01(bb) (it being understood that the amount under this clause (iii) shall only be available for use under Sections 7.01(bb) and/or 7.03(y), as applicable).

  • Average Actual Deferral Percentage means the average (expressed as a percentage) of the Actual Deferral Percentages of the Eligible Participants in a group.

  • Positive beam limitation means the automatic or semi-automatic adjustment of an x-ray beam to the size of the selected image receptor, whereby exposures cannot be made without such adjustment.

  • Incremental Available Transfer Capability Revenue Rights means the rights to revenues that are derived from incremental Available Transfer Capability created by the addition of Merchant Transmission Facilities or of one of more Customer-Funded Upgrades.

  • Applicable Commitment Commission Percentage means (i) for each day on which the Aggregate Exposure is less than or equal to 50% of the Total Commitment, 0.375% and (ii) for each day on which the Aggregate Exposure exceeds 50% of the Total Commitment, 0.250%.

  • Method Detection Limit (MDL means the minimum concentration of a substance (analyte) that can be measured and reported with 99 percent confidence that the analyte concentration is greater than zero and is determined from analysis of a sample in a given matrix containing the analyte.

  • Maximum Concentration Level Assessment means the Maximum Concentration Level Assessment for the purposes of a Basic Comprehensive Certificate of Approval, described in the Basic Comprehensive User Guide, prepared by a Toxicologist using currently available toxicological information, that demonstrates that the concentration at any Point of Impingement for a Compound of Concern that does not have a Ministry Point of Impingement Limit is not likely to cause an adverse effect as defined by the EPA. The concentration at Point of Impingement for a Compound of Concern must be calculated in accordance with O. Reg. 419/05.

  • Class C Required Amount means with respect to any Payment Date, an amount equal to the excess of the amount described in Section 4.4(a)(v) over Available Finance Charge Collections applied to pay such amount pursuant to Section 4.4(a).

  • Actual Deferral Percentage means, for a specified group of Participants for a Plan Year, the average of the ratios (calculated separately for each Participant in the group) of (1) the amount of Employer contributions actually paid over to the Trust on behalf of the Participant for the Plan Year to (2) the Participant's Earnings for the Plan Year (or, provided that the Employer applies this method to all Employees for a Plan Year, the Participant's Earnings for that portion of the Plan Year during which he was eligible to participate in the Plan). Employer contributions on behalf of any Participant shall include: (i) his Elective Deferrals, including Excess Elective Deferrals of Highly Compensated Employees, but excluding (A) Excess Elective Deferrals of Non-Highly Compensated Employees that arise solely from Elective Deferrals made under the Plan or another plan maintained by an Affiliated Employer, and (B) Elective Deferrals that are taken into account in the Average Contribution Percentage test described in Section 5.10 (provided the ADP test is satisfied both with and without exclusion of these Elective Deferrals), and excluding Elective Deferrals returned to a Participant to reduce an Excess Amount as defined in Section 6.5(f); and (ii) if the Employer has elected to make Qualified Nonelective Contributions, such amount of Qualified Nonelective Contributions, if any, as shall be necessary to enable the Plan to satisfy the ADP test and not used to satisfy the ACP test; and (iii) if the Employer has elected to make Qualified Matching Contributions, such amount of Qualified Matching Contributions, if any, as shall be necessary to enable the Plan to satisfy the ADP test and not used to satisfy the ACP test. For purposes of computing Actual Deferral Percentages, an Employee who would be a Participant but for his failure to make Elective Deferrals shall be treated as a Participant on whose behalf no Elective Deferrals are made.

  • Class B Required Amount shall have the meaning set forth in subsection 4.04(b).

  • Required Availability means Excess Availability and unrestricted cash and Cash Equivalents in an amount of not less than $5,000,000.

  • Required Reserve Factor Floor means, for any Calculation Period, the sum (expressed as a percentage) of (a) 28.00% plus (b) the product of the Adjusted Dilution Ratio and the Dilution Horizon Ratio, in each case, as of the immediately preceding Cut-Off Date.

  • Applicable Measurement Period means the most recently completed four consecutive fiscal quarters of the Issuer immediately preceding the Applicable Calculation Date for which internal financial statements are available.

  • Applicable Share Limit means a number of Shares equal to (A) the minimum number of Shares that could give rise to reporting or registration obligations or other requirements (including obtaining prior approval from any person or entity) of a Dealer Person, or could result in an adverse effect on a Dealer Person, under any Applicable Restriction, as determined by Dealer in its reasonable discretion, minus (B) 1% of the number of Shares outstanding.

  • Maximum Incremental Facilities Amount means, at any date of determination, (a) the sum of (i) $500,000,000, plus (ii) an amount such that the Borrower is in Pro Forma Compliance with the Senior Secured Leverage Test (for the avoidance of doubt without netting any cash from the proceeds of any Indebtedness being incurred in reliance on such test and, if applicable, assuming the full amount of any New Revolving Credit Commitments are drawn), plus (iii) amounts used to incur Indebtedness the Net Cash Proceeds of which are substantially concurrently used to refinance or replace Revolving Credit Commitments and/or Term Loans (including any fees, accrued interest or other amounts owing in respect thereof), plus (iv) from and after the 2012 Extension Effective Date, the aggregate principal amount of 2014 Term Loans outstanding as of such date of determination, provided that such additional amounts pursuant to this clause (iv) are only available to the extent such amounts are used to incur Indebtedness the Net Cash Proceeds of which are substantially concurrently used to prepay 2014 Term Loans in accordance with Section 5.1 of this Agreement (such prepaid 2014 Term Loans, “Incremental Facility Prepaid 2014 Term Loans”) plus (v) the Dollar Equivalent principal amount of Term Loans (other than New Term Loans, Incremental Facility Prepaid 2014 Term Loans or Term Loans refinanced or replaced pursuant to clause (iii) above) voluntarily prepaid pursuant to Section 5.1 prior to such date, plus (vi) the amount of all Revolving Credit Commitments that have either been permanently reduced pursuant to Section 4.2 or have otherwise terminated in accordance with the terms of this Agreement after the 2012 Extension Effective Date (without duplication of the amounts incurred pursuant to clause (iii) above) minus (b) the sum of (i) the aggregate principal amount of New Loan Commitments incurred pursuant to Section 2.14(a) prior to such date and (ii) the aggregate principal amount of Permitted Other Indebtedness issued or incurred pursuant to Section 10.1(bb)(i)(a) prior to such date.

  • Base Day-ahead Scheduling Reserves Requirement means the thirty-minute reserve requirement for the PJM Region established consistent with the Applicable Standards, plus any additional thirty-minute reserves scheduled in response to an RTO-wide Hot or Cold Weather Alert or other reasons for conservative operations.

  • Maximum Basic Grant Amount’ has the same meaning as set out in item 1 of Schedule 1 of HESA;

  • Waiver eligibility span means the twelve-month period following either an individual's initial waiver enrollment date or a subsequent eligibility re- determination date.