ASHRAE Standard 90.1 definition

ASHRAE Standard 90.1 means the American Society of Heating, Refrigerating and Air-Con- ditioning Engineers ANSI/ASHRAE/IES Stand- ard 90/1 Energy Standard for Buildings Except Lo -Rise Residential Buildings.
Sample 1Sample 2Sample 3
ASHRAE Standard 90.1 means the American So-
Sample 1Sample 2Sample 3

Examples of ASHRAE Standard 90.1 in a sentence

  • Climate zones are defined in ASHRAE Standard 169, as specified in ASHRAE Standard 90.1, and include eight primary climate zones in the United States, the hottest being climate zone 1 and the coldest being climate zone 8.

  • These models provide coverage of the significant changes in ASHRAE Standard 90.1 from 2016 to 2019 and are used to show the impacts of the changes on annual energy usage.

  • Provide duct and piping insulation in accordance with the ASHRAE Standard 90.1. External and internal insulation for the equipment shall be in compliance with the manufacturer's standard practice.

  • As discussed, DOE is required to conduct an evaluation of each class of covered equipment in ASHRAE Standard 90.1 every six years.

  • These models provide coverage of the significant changes in ASHRAE Standard 90.1 from 2013 to 2016 and are used to show the impacts of the changes on annual energy usage.

  • EPCA specifies that, for any commercial and industrial equipment addressed under 42 U.S.C. 6313(a)(6)(A)(i), DOE may prescribe an energy conservation standard more stringent than the level for such equipment in ASHRAE Standard 90.1, as amended, only if ‘‘clear and convincing evidence’’ shows that a more-stringent standard would result in significant additional conservation of energy and is technologically feasible and economically justified.

  • To adopt standards for PTACs and PTHPs that are more stringent than the efficiency levels in ASHRAE Standard 90.1 as amended, DOE must determine, supported by clear and convincing evidence, that such standards are technologically feasible.

  • Energy EfficiencyFor new construction, HTF-assisted projects must comply with energy efficiency standards of the 2007 edition of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 90.1. Uniform Relocation ActThe development of housing with HTF assistance is required to follow the requirements of the Uniform Relocation Assistance and Real Property Acquisition Policies Act of 1970.

  • Additionally, HVAC design shall comply with ASHRAE Standard 90.1, 62.1, and 55.

  • Id. In doing so, EPCA established Federal energy conservation standards that generally correspond to the levels in ASHRAE Standard 90.1, as in effect on October 24, 1992 (i.e., ASHRAE Standard 90.1–1989), for each type of covered equipment listed in 42U.S.C. 6313(a).

Related to ASHRAE Standard 90.1

  • State Standard Agreement means the form used by the State to enter into agreements with other parties. Several originally signed, fully executed versions of the State Standard Agreement, together with the integrated Contract Documents, shall each represent the Agreement as an individual “Contract Counterpart.”

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Common Reporting Standard (CRS) means the Standard for Automatic Exchange of Financial Account Information (“AEOFAI”) in Tax Matters and was developed in response to the G20 request and approved by the Organisation for Economic Co-operation and Development (OECD) Council on 15 July 2014, calls on jurisdictions to obtain information from their financial institutions and automatically exchange that information with other jurisdictions on an annual basis. It sets out the financial account information to be exchanged, the financial institutions required to report, the different types of accounts and taxpayers covered, as well as common due diligence procedures to be followed by financial institutions.

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Air Standards Manager means the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, or any other person who represents and carries out the duties of the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, as those duties relate to the conditions of this Certificate.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Technical standard means a document that specifies design, predicted performance and operation and maintenance specifications for a material, device or method.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Maintenance Manual shall have the meaning ascribed to it in Clause 10.7; “Maintenance Programme” shall have the meaning set forth in Clause 14.3; “Maintenance Period” shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause14.2;

  • Contract Standard means such standard as complies in each and every respect with all relevant provisions of the Contract;

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Minimum Standards means standards of practice that interpret the legal definition of nursing as well as provide criteria against which violations of the law can be determined.

  • Technical Standards means the technical standards set out in paragraph 2.4 of the Order Form;

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Service Standards means the set of Service Measures, Service Levels, conditions and Service Guarantee Payments as set out in Schedule 1;

  • harmonised standard means harmonised standard as defined in point (c) of point 1 of Article 2 of Regulation (EU) No 1025/2012;

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • Basic Comprehensive User Guide means the Ministry document titled Basic Comprehensive Certificates of Approval (Air) User Guide” dated April 2004 as amended.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Standard Interface means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.

  • standard scale means the standard scale contained in section 55 of the Interpretation Act 2015 (of Tynwald)33;