Bag filter definition

Bag filter means a pressure-driven separation device that removes particulate matter larger than 1 micrometer using an engi- neered porous filtration media. They are typically constructed of a nonrigid, fabric filtration media housed in a pressure vessel in which the direction of flow is from the inside of the bag to outside.
Bag filter means a pressure-driven separation device that removes particulate matter larger than one micrometer using an engineered porous filtration media.
Bag filter means a pressure-driven separation device that removes particulate matter larger than one micrometer using an engineered porous filtration media. It is typically constructed of a non-rigid, fabric filtration media housed in a pressure vessel in which the direction of flow is from the inside of the bag to the outside.

Examples of Bag filter in a sentence

  • Bag filter alongwith stack of adequate height should be provided to coal/biomass fired boiler to control particulate emission within 50 mg/Nm3.

  • Additional Specific Conditions decided during the meeting of SEAC: i) The project proponent shall install Side Suction Hood followed by Pulse-jet Bag filter with offline cleaning technology as APCD as per the amount indicated in the Environment Management Plan.

  • Installation of Bag filter dust injection system in ABC The impact of above measures:-1) Installation of VFD drive in compressors leads to saving in auxiliary power consumption.

  • Dust collected from various pollution control equipments like Bag filter / Bag house will be totally recycled back to the system.

  • Additional Specific Conditions decided during the meeting of SEAC: i) The project proponent shall install Side Suction Hood followed by Pulse-jet Bag filter with offline cleaning technology as APCD as per the amount indicated in the revised Environment Management Plan.

  • Bag filter: An apparatus for removing dust from dust-laden air, employing cylinders of closely woven material that permit passage of air but retain solid particles.

  • One number differential pressure switch with two set points will be provided for each module of the Bag filter.

  • Bag filter will be provided to coal/briquettes fired Thermic fluid heater and steam boiler to control particulate emissions.

  • Write the date that the Bag filters were changed on the FILTER REQUENCY CHART under Filter Change No. 1/Actual.2. Determine the number of days between the Startup date and the Bag filter Change No. Actual date.

  • Bag filter along with stack of adequate height should be installed to coal fired boiler& Thermic fluid heater to control particulate emissions.


More Definitions of Bag filter

Bag filter means the filtration system used for removal of particulates from flue gas as described in the application.

Related to Bag filter

  • Cartridge filter means a discrete filter unit containing one or more disposable cartridges that contain both filter paper and activated carbon which trap and remove contaminants from the cleaning solvent.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Wedge filter means a filter which effects continuous change in transmission over all or a part of the useful beam.

  • Solid film lubricant means a very thin coating consisting of a binder system containing as its chief pigment material one or more of molybdenum disulfide, graphite, polytetrafluoroethylene (PTFE) or other solids that act as a dry lubricant between faying surfaces.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Slow sand filtration means a process involving passage of raw water through a bed of sand at low velocity (generally less than 0.4 meters per hour (m/h)) resulting in substantial particulate removal by physical and biological mechanisms.

  • Dynamic driving task means the same as that term is defined in Section 41-26-102.1.

  • Conventional filtration treatment means a series of processes including coagulation, flocculation, sedimentation, and filtration resulting in substantial particulate removal.

  • Catalog means the available list of tangible personal property or services, in the most current listing, regardless of date, during the life of the contract, that takes the form of a catalog, price list, schedule, shelf price or other form that:

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • HIV/AIDS means Human Immuno-deficiency Virus/Acquired Immune Deficiency Syndrome;

  • Dusting aid means a product designed or labeled to assist in removing dust and other soils from floors and other surfaces without leaving a wax or silicone based coating. “Dusting Aid” does not include “Pressurized Gas Duster.”

  • Catalogue means the catalogue of IT Products available for Order under the provisions of the Framework Agreement.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Central fill pharmacy means a pharmacy contracting with an originating pharmacy, or having the same owner as an originating phar- macy, that provides centralized prescription filling on behalf of the originating pharmacy pursuant to these rules.

  • Polystyrene foam means blown polystyrene and expanded and

  • Engines means, as of any date of determination, all Engines then leased hereunder.