Blank test definition

Blank test means the testing of an instrument to ensure that no alcohol from a previous test can interfere with a person's breath test.
Sample 1Sample 2Sample 3

Examples of Blank test in a sentence

  • Blank test was performed in the same experimental conditions without biosorbent.

  • Blank test soils were obtained from the Washington Range at Fort Greely, Alaska (FG), Yakima Training Center, Washington (YTC), and Camp Guernsey, Wyoming (CG).

  • Blank test certification application forms for the test results will be provided to the testing facilities by the [director] department.

  • Blank test shows that the conversion of BPA after 180 min at 140°C reaches only 37.0 % and leads to many by-products, as shown on the HPLC chromatogram displayed in Fig.

  • Blank test was carried out using the above procedure except that water was used instead of the test sample.

  • Blank test was also performed by analyzing test solution and fish homogeneate with no spiked test substance.

  • RF power 1.2 kW Plasma gas flow 15.0 L/min Auxiliary gas flow 1.5 L/min Nebulizer gas pressure 0.75 MPa Emission line S(Ⅰ): 180.669 nm 2.2.5.3 Blank test procedure A blank test was conducted throughout the entire procedure consisting of the decomposition procedure, the separation procedure, and the determination procedure.

  • If the reading of Air Blank test is greater than 0.00, the BAT must remove the Evidentiary Breath Alcohol Device from service.

  • The BAT should begin the Confirmation Test as soon as possible following this waiting period, and no longer than 30 minutes after the completion of the Screening Test.In the presence of the Athlete, the BAT performs an Air Blank test on the Evidentiary Breath Alcohol Device before beginning the Confirmation Test, and shows the reading to the Athlete.

  • The Pinnacle Award of DeKalb REALTORS® has been established and is sponsored by the Association, and all actions associated with the Pinnacle Award shall be subject to the approval of the Board of Directors of the Association.

Related to Blank test

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Witness test means the Company’s right to witness the commissioning testing and/or Company-required Interconnecting Customer-owned communication system. Commissioning testing is defined in IEEE Standard 1547-2003.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Borrowing Base Test means as of any date, a determination that (a) the lesser of (i) the Borrowing Base and (ii) the Facility Amount shall be equal to or greater than (b) the Advances Outstanding.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Acceptance Test Document means a document, which defines procedures for testing the functioning of installed system. The document will be finalized with the contractor within 7 days of issuance of the Letter of Award.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Coverage Test means each of the Class A/B Par Value Test, the Class A/B Interest Coverage Test, the Class C Par Value Test, the Class C Interest Coverage Test, the Class D Par Value Test, the Class D Interest Coverage Test, the Class E Par Value Test and the Class E Interest Coverage Test.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Coverage Tests The Overcollateralization Ratio Test and the Interest Coverage Test, each as applied to each specified Class or Classes of Secured Debt.

  • Incurrence Test means the incurrence test set out in Clause 12.1 (Incurrence Test).

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Confirmation test means a drug or alcohol test on a sample to substantiate the results of a prior drug or alcohol test on the same sample and which uses different chemical principles and is of equal or greater accuracy than the prior drug or alcohol test;

  • S&P CDO Monitor Test A test that will be satisfied on any date of determination (following receipt, at any time on or after the S&P CDO Monitor Election Date, by the Issuer and the Collateral Administrator of the Class Break-even Default Rates for each S&P CDO Monitor input file (in accordance with the definition of “Class Break-even Default Rate”)) if, after giving effect to a proposed sale or purchase of an additional Collateral Obligation, the Class Default Differential of the Highest Ranking Class of the Proposed Portfolio is positive. The S&P CDO Monitor Test will be considered to be improved if the Class Default Differential of the Proposed Portfolio that is not positive is greater than the corresponding Class Default Differential of the Current Portfolio.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Two Times Test As to any Distribution Date, (i) the Aggregate Subordinate Percentage is at least two times the Aggregate Subordinate Percentage as of the Closing Date; (ii) the aggregate of the Principal Balances of all Mortgage Loans Delinquent 60 days or more (including Mortgage Loans in REO and foreclosure) (averaged over the preceding six-month period), as a percentage of the aggregate of the Class Certificate Principal Balances of the Subordinate Certificates, does not equal or exceed 50%; and (iii) on or after the Distribution Date in January 2008, cumulative Realized Losses do not exceed 30% of the Original Subordinated Principal Balance or prior to the Distribution Date in January 2008, cumulative Realized Losses do not exceed 20% of the Original Subordinated Principal Balance.