Brush coating definition

Brush coating means the application of a coating material to a substrate by means of a brush (this technique is commonly used for touch-up and maskant operations).
Sample 1Sample 2Sample 3

Examples of Brush coating in a sentence

  • Brush coating and/or stripe coating with a primer shall be applied to welds, cutouts, sharp edges, rivets, crevices, and bolts to ensure complete coverage and proper thickness prior to final primer applications.

  • Brush coating is done through the use of a synthetic or natural hair brush which is appropriately sized and compatible with the product being applied.

  • For the purposes of this subsection (h), flow coating means a non-atomized technique of applying coating to a substrate with a fluid nozzle with no air supplied to the nozzle; D) Roll coating; E) Brush coating; F) Dip coating, including electrodeposition.

Related to Brush coating

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Specialty coating means a coating that is used for unusual job performance requirements, usually in small amounts. These products include but are not limited to adhesion primers, resist coatings, soft coatings, reflective coatings, electrostatic prep coatings, headlamp lens coatings, ink pad printing coatings, stencil coatings, texture coatings (automotive), vacuum metalizing coatings, and gloss flatteners.

  • Low-solids coating means a coating containing 0.12 kilogram or less of solids per liter (one pound or less of solids per gallon) of coating material.

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Energy means electricity, natural gas, steam, hot or chilled water, fuel oil, or other product for use in a building, or renewable on-site electricity generation, for purposes of providing heating, cooling, lighting, water heating, or for powering or fueling other end-uses in the building and related facilities, as reflected in Utility bills or other documentation of actual Energy use.