Build Standards definition

Build Standards means unless otherwise agreed by the District Council Dwellings
Sample 1Sample 2
Build Standards means unless otherwise agreed by the District Council Dwellings that achieve at least the minimum requirements of Building for Life 12 (which is a government endorsed industry standard for well-designed homes)
Sample 1Sample 2
Build Standards means unless otherwise agreed by the District Council Dwellings that achieve at least the minimum requirements of Building for Life 12 (which is a
Sample 1Sample 2

Examples of Build Standards in a sentence

  • All gages are to be designed and built per SL’s Gage and Fixture Design and Build Standards.

  • After adoption, the City Manager is authorized to transfer appropriated funds between major expenditure categories within departments and between departments.

  • This results from decrease in prices of HST bought by farmers, and ultimately, decrease in final price faced by consumers.

  • FC-3: Configuration Management FC-3.1 Voya implements and maintains accurate and complete configuration details (e.g., Infrastructure Build Standards) for all computing assets used in accessing, storing, processing, or transmitting Client PI.

  • Similarly, the public consultations for both the Mandatory Build Standards for private sewers and Sustainable Urban Drainage (SUDS) Standards which had been due out early in the year were not finally released until mid December.

  • Work will include identifying and delivering large scale remote Renewable Energy projects which are essential to remain within the carbon budget, procuring a Solar PV partner, delivering a Zero Carbon whole building retrofit pilot, agreeing the Manchester Build Standards to be used going forward, developing an accelerated boiler replacement programme and commission expert consultancy to validate existing views about the pathway to zero carbon heat.

  • Progress to date in implementing the proposals and policies set out in the RPP2We consider relevant policies/proposals in turn and as follows: Domestic Building Energy Standards– New Build Standards.

  • With the introduction of the Mandatory Build Standards, changes will be required in Part H of the Building Regulations to remove criteria which is applicable to foul sewers and foul lateral drains.

  • A specific condition of a Section 104 agreement is that the new sewer development meets Mandatory Build Standards (MBS), which set out the required standards in the design and construction of new sewers and lateral drains.

Related to Build Standards

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • Technical Standards means the technical standards set out in paragraph 2.4 of the Order Form;

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Minimum Standards means standards of practice that interpret the legal definition of nursing as well as provide criteria against which violations of the law can be determined.

  • National Standards means the document entitled “National Standards for the Volatile Organic Compound Content of Canadian Commercial/Industrial Surface Coating Products Automotive Refinishing, October 1998, PN 1288" and published by the Canadian Council of Ministers of the Environment;

  • harmonised standard means harmonised standard as defined in point (c) of point 1 of Article 2 of Regulation (EU) No 1025/2012;

  • Technical standard means a document that specifies design, predicted performance and operation and maintenance specifications for a material, device or method.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Security Standards means the final rule implementing HIPAA’s Security Standards for the Protection of Electronic PHI, as amended.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Environmental and Social Standards or “ESSs” means, collectively: (i) “Environmental and Social Standard 1: Assessment and Management of Environmental and Social Risks and Impacts”; (ii) “Environmental and Social Standard 2: Labor and Working Conditions”; (iii) “Environmental and Social Standard 3: Resource Efficiency and Pollution Prevention and Management”;

  • auditing standards means auditing standards as defined in National Instrument 52-107 Acceptable Accounting Principles and Auditing Standards;

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Pretreatment standards means all applicable Federal rules and regulations implementing Section 307 of the Act, as well as any nonconflicting State or local standards. In cases of conflicting standards or regulations, the more stringent thereof shall be applied.

  • Environmental Standards means regulations or certification specifications governing the certification of designs with regard to noise characteristics and exhaust emissions of civil aeronautical products and appliances.