Calibration blank definition

Calibration blank means a sample containing insignifi- cant or undetectable levels of target analytes used to establish the analytical zero of a calibration function.
Sample 1Sample 2Sample 3
Calibration blank means an aliquot that consists of the same matrix as that used for the calibration standards, but without the analytes.
Sample 1Sample 2Sample 3
Calibration blank means a sample devoid of target analytes used to establish the analytical zero of a calibration function.
Sample 1

Examples of Calibration blank in a sentence

  • Calibration blank - Prepare by acidifying reagent water using the same combination and concentrations of acids used in the preparation of the matrix-matched calibration standards (Sec.

  • All the ‘1’ votes are counted for each candidate in an electorate.

  • Calibration blank - Consists of 1% (v/v) nitric acid in reagent grade water.

  • Calibration blank - Consists of 1% (v / v) nitric acid in reagent grade water.

  • Calibration blank – A calibration blank is usually an organic or aqueous solution that is as free of analyte as possible and prepared with the same volume of chemical reagents used in the preparation of the calibration standards and diluted to the same volume with the same solvent (water or organic) used in the preparation of the calibration standard.

  • The calibration curve for free phosphate determination consists of a Calibration blank and six non-zero calibra- tion standards covering concentrations ranging from 0.2 mM to 25.0 mM of Monobasic Potassium Phosphate buffer (0.2, 1.0, 5.0, 10.0, 14.5 & 25.0 mM).

  • Calibration blank: Using a micropipette, transfer 600 µL of water to a 1.5-mL microcentrifuge tube with a snap- top closure and close.

  • Hazard(s) Identification • Product identifier • Product name: Calibration blank solution 5pct HNO3 [500 mL bottle ] • Part number: 5190-7001 • Relevant identified uses of the substance or mixtur e and uses advised against No further relevant information available.

  • Upon written request of the applicant or permittee to the Director, an additional reasonable specified period of time not to exceed one year shall be granted upon determination of good cause by the Director.

  • Documents: arp funds.pdf ORD 121Declaring the City’s interest in certain vacant land as surplus, and our intention to transfer certain vacant land acquired by Shreveport Public Assembly & Recreation, to Shreveport Common, Inc.


More Definitions of Calibration blank

Calibration blank means a blank that consists of the same solvent as that used for the calibration standards, but without t he analytes.
Sample 1
Calibration blank means a sample containing insignificant or unde- tectable levels of target analytes used to establish the analytical zero of a calibra- tion function.
Sample 1
Calibration blank means a sample containing insignificant or undetectable levels of target analytes used to establish the analytical zero of a calibration function.
Sample 1

Related to Calibration blank

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Meter means a device which records the demand and/or the electrical energy consumed and includes conventional and prepayment meters;

  • Installation inspector means a person who, by reason of his knowledge of the physical sciences and the principles of engineering, acquired by a professional education and related practical experience, is qualified to supervise the installation of tank systems.

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Radiation detector means a device which in the presence of radiation provides a signal or other indication suitable for use in measuring one or more quantities of incident radiation.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Attenuation block means a block or stack, having dimensions 20 centimeters by 20 centimeters by 3.8 centimeters, of type 1100 aluminum alloy or other materials having equivalent attenuation.

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • Standard Amendment Coversheet refers to the form used by the Judicial Council to amend agreements with other parties. Several originally signed, fully executed versions of a Standard Amendment, together with the integrated Contract Documents, shall each represent an Amendment as an individual contract counterpart.

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • Batch means a specific quantity of Product that is intended to have uniform character and quality, within specified limits, and is produced according to a single manufacturing order during the same cycle of manufacture.

  • Metering Point means, for meters that do not use instrument transformers, the point at which the billing meter is connected. For meters that use instrument transformers, the point at which the instrument transformers are connected.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Disinfection profile means a summary of daily Giardia lamblia inactivation through the treatment plant. The procedure for developing a disinfection profile is contained in s. NR 810.32.

  • Sample means urine, blood, breath, saliva, or hair.

  • Clinical nurse specialist means a registered nurse with relevant post-basic qualifications and 12 months’ experience working in the clinical area of his/her specified post-basic qualification, or a minimum of four years’ post-basic registration experience, including three years’ experience in the relevant specialist field and who satisfies the local criteria.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.