Calibration curve definition

Calibration curve means the graphical relationship between the known values, such as concentrations, of a series of calibration standards and their instrument response.
Sample 1Sample 2Sample 3
Calibration curve means the functional relationship between in- strument response and target analyte concentration determined for a series of calibration standards. The calibration curve is obtained by plotting the instrument response versus concentration and performing a regression analysis of the data.
Sample 1Sample 2Sample 3
Calibration curve means the relationship between an analyzer’s response to the injec- tion of a series of calibration gases and the actual concentrations of those gases.
Sample 1Sample 2

Examples of Calibration curve in a sentence

  • The determination of whether a partnership meets the requirements for the exception for small partnerships under section 6231(a)(1)(B) and this paragraph (a) shall be made with respect to each partnership taxable year.

  • Calibration curve was constructed by using standard solution with 25 ppb, 50ppb and 100 ppb with r >0.95 for each analyte.Statistical Analysis Multivariate technique such as Principal Component Analysis (PCA) and cluster analysis were carried out to interpret the data in order to group the carbons based on their physical and chemical properties, adsorptive properties, and overall properties.

  • Calibration curve of Cu. Photometric measurements were made at 610 nm At the outset the test run analysis is carried out in order to characterize the calibration curves.

  • Loss of target analytes possible. Depending on the type of sample container/vessel in which the sample is collected, sample may need to be transferred before injection into sparger –potential sample loss in transfer process. Low recovery of polar/water soluble compounds. Calibration curve not matrix-matched if liquid standards are used. Not recommended for polar/water soluble compounds. Surrogates (liquid- phased) are used, but introduced separately into sparger.

  • Calibration curve data were constructed in the range of the concentrations of 10µg/ml to 100µg/ml.

  • Calibration curve was prepared by plotting absorbance versus respective concentration of PRO.This series consisted of five concentrations of standard HCT solution ranging from 5-25 μg/ml.

  • Calibration curve is bent at ~700Gy, but is not saturated up to 960Gy.2C-32, 2D-06 and 4A-18For each sample, four to thirteen data were obtained along the traverse from the surface to center of a cubic sample.

  • Calibration curve: SMD measured by PDA is plotted against SLIPI-LIF/Mie ratio of ethanol and butanol derived from data at different recording times aESOI, 298 K fuel temperature.

  • Calibration curve parameters, calculated concentrations for the standards, and calculated concentrations for the quality control samples were provided.

  • Calibration curve was prepared by plotting absorbance versus respective concentration of HCT.


More Definitions of Calibration curve

Calibration curve means a graphical display of the functional relationship between the instrument or analytical device response and the analyte amount.
Sample 1
Calibration curve means the graphical relationship between the known values, such as
Sample 1

Related to Calibration curve

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Process Gas means gas used for which alternate fuels, other than another gaseous fuel, are not technically feasible such as in applications requiring precise temperature controls and precise flame characteristics.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Generation Interconnection Customer means an entity that submits an Interconnection Request to interconnect a new generation facility or to increase the capacity of an existing generation facility interconnected with the Transmission System in the PJM Region.

  • Carbon dioxide or “CO2” means the most common of the six primary greenhouse gases, consisting on a molecular level of a single carbon atom and two oxygen atoms.

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.

  • Meter means a device which records the demand and/or the electrical energy consumed and includes conventional and prepayment meters;

  • Surplus Interconnection Customer means either an Interconnection Customer whose Generating Facility is already interconnected to the PJM Transmission System or one of its affiliates, or an unaffiliated entity that submits a Surplus Interconnection Request to utilize Surplus Interconnection Service within the Transmission System in the PJM Region. A Surplus Interconnection Customer is not a New Service Customer.

  • Assay means a laboratory analysis of Crude Petroleum to include the following: A.P.I. Gravity, Reid vapor pressure, composition, pour point, water and sediment content, sulfur content, viscosity, distillation, hydrogen sulfide, flash/boiling point and other characteristics as may be required by Carrier.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • Interconnection Customer means a Generation Interconnection Customer and/or a Transmission Interconnection Customer.

  • DNA sample means any material that has come from a human body and consists of or includes human cells;

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Bid sample means a sample to be furnished by a bidder to show the characteristics of the item offered in the bid.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • Cooling curve means the graphical relationship between heat units stored and cooling time.

  • Outputs means the goods or services that are produced by an entity or other person;

  • Capacity Export Transmission Customer means a customer taking point to point transmission service under Tariff, Part II to export capacity from a generation resource located in the PJM Region that has qualified for an exception to the RPM must-offer requirement as described in Tariff, Attachment DD, section 6.6(g).

  • Blend means seed consisting of more than one variety of a kind, each in excess of five percent by weight of the whole.

  • Bulk mixing plant means machinery, appliances or other similar devices that are assembled in such a manner so as to be able to mix materials in bulk for the purposes of using the mixed product for construction work;

  • Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.