Code of Safety for Special Purpose Ships definition

Code of Safety for Special Purpose Ships means the Code annexed to IMO Resolution A.534(13);
Sample 1Sample 2Sample 3

Examples of Code of Safety for Special Purpose Ships in a sentence

  • The vessel is to be all of steel, welded construction, double hulled, meeting the requirements of Code of Safety for Special Purpose Ships, 2008; and Guidelines for ships operating in Arctic Ice Covered waters as amended, all applicable SOLAS, MARPOL, Classification and Indian National Regulations.

  • The Isle of Man accepts the Code of Safety for Special Purpose Ships, 2008 (SPS Code) to new vessels constructed to the Code from 01 July 2014.Ships which do not meet the requirements of this Code can be constructed to an equivalent standard, as follows:1.

  • MSC.266(84) Code of Safety for Special Purpose Ships 2008.Compliance to Indian Merchant Ships (IMS) Rules Class VIII.

  • The term "Special Personnel" is as defined in the "Code of Safety for Special Purpose Ships, 2008" (cf.

  • The vessel is to be all of steel, welded construction, double hulled, meeting therequirements of Code of Safety for Special Purpose Ships, 2008; and Guidelines for ships operating in Arctic Ice Covered waters as amended, all applicable SOLAS, MARPOL, Classification and Indian National Regulations.

  • The Vessel with engines and equipment shall be designed & built under the dual class of IRS and one of the classification societies from DNV-GL, BV, ABS and LR and shall comply with:-Class Notations (DNV-GL notations given as reference): DNV+1A1, PC5, HELDK, SPS, E0, CLEAN DESIGN, NAUT-AW, DPS2, LFL*, TMON, SILENTA, VIBR, COMF V(3)-C(3), WINTERIZED COLD(-15, -35) Compliant with IMO Res.MSC.266(84) Code of Safety for Special Purpose Ships 2008.

  • Although we cannot recall the moments of our conception and birth, that makes them no less real to us.

  • In view of the fitness check recommendations, it is therefore proposed to clarify in Article 3(2) that Directive 2009/45/EC does not apply to➢ Ships referred in Regulation 1.2.3 of Chapter I of the Code of Safety for Special Purpose Ships, IMO Resolution MSC.266(84) of 13 May 2008, as amended.

  • Name of Ship Class & Class No. IMO No. Flag Port of Registry Gross Tonnage *Type of Ship (in SMC/ISSC) Date on which keel was laid **Date of (expected) Registry Crew Nationality * In case the ship was constructed in compliance with the IMO Code of Safety for Special Purpose Ships (SPS Code), “Special Purpose Ship” is to be described.** The date when the ship was (will be) registered with the current flag is to be described referring to Certificate of Registry or Continuous Synopsis Record (CSR).

  • Code of Safety for Special Purpose Ships 2008 as Amended TONNAGE45International Convention on Tonnage Measurement of Ships 1969 RESTRICTED VESSELS360Ships that assist North Korea will be captured and processed.February 2018 YACHT370Yacht Technical PolicyDecember 2018 The Panama Maritime Authority always committed to offer a service of excellence has put together all circulars in a more friendly format or E-book for your easier and more convenient viewing.

Related to Code of Safety for Special Purpose Ships

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Spatial Planning and Land Use Management Act means the Spatial Planning and Land Use Management Act, 2013 (Act 16 of 2013);

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • General air quality operating permit or "general permit" means an air quality operating permit that meets the requirements of ARM 17.8.1222, covers multiple sources in a source category, and is issued in lieu of individual permits being issued to each source.

  • StarCompliance Code of Ethics application means the web-based application used to electronically pre-clear personal securities transactions and file many of the reports required herein. The application can be accessed via the AB network at: https://alliance-ng.starcompliance.com/.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Corporations Regulations means the Corporations Regulations 2001 (Cth).

  • health and safety file means a file, or other record containing the information in writing required by these Regulations "health and safety plan" means a site, activity or project specific documented plan in accordance with the client's health and safety specification;

  • Health and Safety Plan means a documented plan which addresses hazards identified and includes safe work procedures to mitigate, reduce or control the hazards identified;

  • Safety Management System means a systematic approach to managing safety, including the necessary organisational structures, accountabilities, policies and procedures;

  • General purpose radiographic x-ray system means any radiographic x-ray system which, by design, is not limited to radiographic examination of specific anatomical regions.

  • Operating Manual means Exhibit A of the Conditions.

  • General purpose cleaner means a product designed for general all-purpose cleaning, in contrast to cleaning products designed to clean specific substrates in certain situations. General purpose cleaner includes products designed for general floor cleaning, kitchen or countertop cleaning, and cleaners designed to be used on a variety of hard surfaces and does not include general purpose degreasers and electronic cleaners.

  • Safety Management Certificate has the meaning given to it in the ISM Code.

  • General Special Servicer mean the Person performing the duties and obligations of special servicer with respect to the Mortgage Pool (exclusive of (A) any Serviced Loan Combination or related REO Property as to which a different Loan Combination Special Servicer has been appointed with respect thereto and (B) any Excluded Special Servicer Mortgage Loan or any related REO Property as to which an Excluded Mortgage Loan Special Servicer has been appointed with respect thereto).

  • Operational Manual means the manual referred to in Section 3.03 of this Agreement;

  • General purpose equipment means equipment, which is not limited to research, medical, scientific or other technical activities. Examples include office equipment and furnishings, modular offices, telephone networks, information technology equipment and systems, air conditioning equipment, reproduction and printing equipment, and motor vehicles.

  • National Road Traffic Act means the National Road Traffic Act, 1996 (Act 93 of 1996);

  • International air transportation means transportation by air between a place in the United States and a place outside the United States or between two places both of which are outside the United States.

  • Regional economic integration organization means an organization constituted by sovereign States of a given region to which its member States have transferred competence in respect of matters governed by this Convention and which has been duly authorized, in accordance with its internal procedures, to sign, ratify, accept, approve or accede to this Convention;

  • Clean air standards, as used in this clause means:

  • General purpose adhesive means any non-aerosol adhesive designed for use on a variety of substrates. “General Purpose Adhesive” does not include (i) contact adhesives, (ii) construction, panel, and floor covering adhesives, (iii) adhesives designed exclusively for application on one specific category of substrates (i.e., substrates that are composed of similar materials, such as different types of metals, paper products, ceramics, plastics, rubbers, or vinyls), or (iv) adhesives designed exclusively for use on one specific category of articles (i.e., articles that may be composed of different materials but perform a specific function, such as gaskets, automotive trim, weather-stripping, or carpets).

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.

  • Environmental, Health, and Safety Requirements means all federal, state, local and foreign statutes, regulations, and ordinances concerning public health and safety, worker health and safety, and pollution or protection of the environment, including without limitation all those relating to the presence, use, production, generation, handling, transportation, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control, or cleanup of any hazardous materials, substances or wastes, as such requirements are enacted and in effect on or prior to the Closing Date.

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;