Conductivity test definition

Conductivity test means a determination of the electrolytes in a dialysate.
Sample 1Sample 2Sample 3
Conductivity test means a determination of the electro- lytes in a dialysate.
Sample 1Sample 2Sample 3
Conductivity test means a determination of
Sample 1

Examples of Conductivity test in a sentence

  • Conductivity test shall be conducted on all carbon dioxide hose assemblies.

  • Conductivity test is also recommended as alternative test for rice seed vigor test.

  • Conductivity test shall be performed on all mains after they have been pressure tested and are full of water at normal operating pressure.

  • Conductivity test shall be carried out in the presence of the Engineer or the Engineer's duly authorized agent.

  • Conductivity test was used in determining the vigour of the seeds.

  • Conductivity test between stabilized and charged CMS diodes using PANi-H3PO4 films electrodeposited on gold substrates (2 mol/L, 30s).

  • Some of these methods include: • Chill proofing followed by a Concentration Product (CP) Test• Chill proofing followed by visual inspection (Cold Color Test)• Filtering at 25 ºF for 24 hours followed by visual inspection• Wine freeze/slush test• Conductivity test The stability test used in this study is the Cold Color Test and is described below.

  • Figure 11: Result of Conductivity test from ADITS and Batching plants Figure 12: The pH level test from various sample site as per National Environment Commission Discharge Standard (2010).

  • Conductivity test data in the frequency range of 10-2 to 107 Hz by experimental impedance spectroscopy method were used as input data for both samples.

  • Conductivity test is used to quantify the leakage of electrolytes from the seed coat with respect to age, storage life, and environmental factors such as temperature, humidity and mother plant nutrition.

Related to Conductivity test

  • Hydraulic conductivity means the quantity of water that will flow through a unit cross-sectional area of a porous material per unit of time under a hydraulic gradient of 1.0;

  • S&P CDO Monitor Test A test that will be satisfied on any date of determination (following receipt, at any time on or after the S&P CDO Monitor Election Date, by the Issuer and the Collateral Administrator of the Class Break-even Default Rates for each S&P CDO Monitor input file (in accordance with the definition of “Class Break-even Default Rate”)) if, after giving effect to a proposed sale or purchase of an additional Collateral Obligation, the Class Default Differential of the Highest Ranking Class of the Proposed Portfolio is positive. The S&P CDO Monitor Test will be considered to be improved if the Class Default Differential of the Proposed Portfolio that is not positive is greater than the corresponding Class Default Differential of the Current Portfolio.

  • Productivity as defined in ORS 427.005 means:

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Incurrence Test means the incurrence test set out in Clause 12.1 (Incurrence Test).

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Disinfection profile means a summary of daily Giardia lamblia inactivation through the treatment plant. The procedure for developing a disinfection profile is contained in s. NR 810.34.

  • Class C Coverage Tests means the Class C Interest Coverage Test and the Class C Par Value Test.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Coverage Tests The Overcollateralization Ratio Test and the Interest Coverage Test, each as applied to each specified Class or Classes of Secured Debt.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Coverage Test means each of the Class A/B Par Value Test, the Class A/B Interest Coverage Test, the Class C Par Value Test, the Class C Interest Coverage Test, the Class D Par Value Test, the Class D Interest Coverage Test, the Class E Par Value Test and the Class E Interest Coverage Test.

  • Cannabis testing facility means an entity registered by

  • Asset Test means, for an Asset Review, each Test, as defined in the Asset Representations Review Agreement, in Schedule A to the Asset Representations Review Agreement to be performed by the Asset Representations Reviewer on the related Asset Review Receivables.

  • Independent testing laboratory means an independent organization, accepted by the Contracting Officer, engaged to perform specific inspections or tests of the work, either at the site or elsewhere, and report the results of these inspections or tests.

  • Class D Coverage Tests means the Class D Interest Coverage Test and the Class D Par Value Test.