Consistent removal definition

Consistent removal means the average of the lowest 50% of the removals measured according to Section 310.311. All sample data obtained for the measured pollutant during the time period prescribed in Section 310.311 must be reported and used in computing consistent removal. If a substance is measurable in the influent but not in the effluent, the effluent level may be assumed to be the limit of measurement, and those data may be used by the POTW at its discretion and subject to approval by the Agency. If the substance is not measurable in the influent, the data may not be used. Where the number of samples with concentrations equal to or above the limit of measurement is between eight and twelve, the average of the lowest six removals must be used. If there are less than eight samples with concentrations equal to or less than the limit of measurement, the Agency may approve alternate means of demonstrating consistent removal. “Measurement” refers to the ability of the analytical method or protocol to quantify as well as identify the presence of the substance in question.
Consistent removal means the average of the lowest 50 percent of the removal measured in accordance with subsection 62-625.420(2), F.A.C.
Consistent removal means the reduction in the amount of a pollutant or alteration of the nature of a pollutant in the effluent to a POTW to a lesstoxic or harmless state in the effluent which is achieved by that POTW according to the procedures set forth in 40 CFR, part 403.7 promulgated pursuant to the act.

Examples of Consistent removal in a sentence

  • Consistent removal shall be based provisionally on data from treatability studies or demonstrated removal at other treatment facilities where the quality and quantity of in- fluent are similar.

  • Consistent removal shall be based provisionally on data from treatability studies or demonstrated removal at other treatment facilities where the quality and quantity of influent are similar.

  • Consistent removal may be based provisionally on data from treatability studies or demonstrative removal at other treatment facilities where the quality and quantity of influent are similar.

  • Consistent removal shall be determined in accordance with 40 CFR 403.7(b).

  • Consistent removal for the first 18 months of discharge shall be based on data from treatability studies or demonstrated removal at other treat- ment facilities where the quality and quantity of influent are simi- lar.

  • Consistent removal shall be based provisionally on data from treatability studies or demonstrated removal at other comparable treatment facilities where the quality and quantity of influent are similar.

  • Consistent removal: Contributions of school discipline to the school-prison pipeline.

  • Consistent removal shall mean the average of the lowest 50 percent of the removals measured according to the procedures set forth in Section 403.7 (d) (2) of Title 40 of the Code of Federal Regulations.

  • Consistent removal is calculated by taking the average of the lowest 50 percent of the removal measured according to part 7049.0410.

  • Dow & L.R. Feggins, Consistent removal: Contributions of school discipline to the school-prison pipeline.


More Definitions of Consistent removal

Consistent removal means a reduction in the amount of a pollutant or alteration of the nature of the pollutant by the District's wastewater treatment system to a less toxic or harmless state in the effluent which is achieved by the system in ninety-five percent of the samples taken when collected in accordance with the provisions contained in Section 10.16.040.
Consistent removal means reduction in the amount of a pollutant or alteration
Consistent removal means reduction in the amount of a Pollutant or alteration of the nature of the Pollutant by the Sewage Treatment Plant to a less toxic or harmless state in the effluent which is achieved by the system in 95 percent of the samples taken when measured according to the procedures set forth in Section 403.7(c) (2) of (Title 40 of the Code of Federal Regulations, Part 403) - "General Pretreatment Regulations for Existing and New Sources of Pollution" promulgated pursuant to the Act. The Control Authority may then modify Pollutant discharge limits in the National Pretreatment Standards if the requirements contained in 40 CFR Part 403, Section 403.7, are fulfilled and prior approval from the Approval Authority is obtained.
Consistent removal means reduction in the amount of a pollutant or alteration of the nature of the pollutant by the wastewater treatment system to a less toxic or harmless state in the effluent which is achieved by the system (95 percent of the samples taken) when measured according
Consistent removal means reduction in the amount of pollutant or alteration of the nature of the pollutant by the wastewater treatment system to a less toxic or harmless level in the effluent which is achieved by the system ninety-five (95) percent of the samples taken when measured according to the procedures set forth in 62- 625.700. The city may then modify pollutant discharge limits in the federal pretreatment standards if the requirements contained in chapter 62-625 F.A.C., are fulfilled and prior approval from the approval authority is obtained.
Consistent removal means the average of the lowest 50% of the removals measured according to 35 Ill. Adm. Code 310.311. All sample data obtained for

Related to Consistent removal

  • Graffiti remover means a product labeled to remove spray paint, ink, marker, crayon, lipstick, nail polish, or shoe polish, from a variety of noncloth or nonfabric substrates. “Graffiti Remover” does not include “Paint Remover or Stripper,” “Nail Polish Remover,” or “Spot Remover.” Products labeled for dual use as both a paint stripper and graffiti remover are considered “Graffiti Removers.”

  • preparing for re-use means checking, cleaning or repairing recovery operations, by which products or components of products that have become waste are prepared so that they can be re-used without any other pre-processing;

  • Paint remover or stripper means any product designed to strip or remove paints or other related coatings, by chemical action, from a substrate without markedly affecting the substrate. “Paint Remover or Stripper” does not include “Multi-purpose Solvent,” paint brush cleaners, products designed and labeled exclusively as “Graffiti Remover,” and hand cleaner products that claim to remove paints and other related coatings from skin.

  • Remediation Period has the meaning specified in Section 8.2(a);

  • Random selection process means a process by which currently income-eligible households are selected for placement in affordable housing units such that no preference is given to one applicant over another except for purposes of matching household income and size with an appropriately priced and sized affordable unit (e.g., by lottery).

  • Emergency removal for purposes of this Policy shall mean removing a respondent from the District’s education program or activity on an emergency basis, provided that the District undertakes an individualized safety and risk analysis, determines that an immediate threat to the physical health or safety of any student or other individual arising from the allegations of sexual harassment justifies removal, and provides the respondent with notice and an opportunity to challenge the decision immediately following the removal. Emergency Removals as permitted by this Policy shall not be construed to modify any rights under the Individuals with Disabilities Education Act, Section 504 of the Rehabilitation Act of 1973, or the Americans with Disabilities Act.

  • Complaints Procedure means the School's procedure for handling complaints from parents, as amended from time to time for legal or other substantive reasons, or in order to assist the proper administration of the School. It does not form part of the contract between you and the School. A copy of the most up-to-date procedure is on the School's website and is otherwise available from the School at any time upon request;

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.

  • Prosecution and Maintenance means, with regard to a particular Patent, the preparation, filing, prosecution and maintenance of such Patent, as well as re-examinations, reissues and the like with respect to that Patent, together with the conduct of interferences, the defense of oppositions and other similar proceedings with respect to that Patent.

  • Automotive rubbing or polishing compound means a product designed primarily to remove oxidation, old paint, scratches or swirl marks, and other defects from the painted surfaces of motor vehicles without leaving a protective barrier.

  • Waste reduction , or “pollution prevention” means the practice of minimizing the generation of waste at the source and, when wastes cannot be prevented, utilizing environmentally sound on-site or off-site reuse and recycling. The term includes equipment or technology modifications, process or procedure modifications, product reformulation or redesign, and raw material substitutions. Waste treatment, control, management, and disposal are not considered pollution prevention, per the definitions under Part 143, Waste Minimization, of the Natural Resources and Environmental Protection Act (NREPA), 1994 PA 451, as amended.

  • 85 percent removal means the arithmetic mean of the values for effluent samples collected in a period of 30 consecutive days shall not exceed 15 percent of the arithmetic mean of the values for influent samples collected at approximately the same times during the same period.

  • Ordering and Billing Forum (OBF means the forum comprised of local telephone companies and inter-exchange carriers (IXCs), whose responsibility is to create and document Telecommunication industry guidelines and standards.

  • Notice of Removal means a notice, under clause 17.4.5, from an Association to a Nominated Person Removing the Nominated Person.

  • Initial Environmental Examination or “IEE” means the initial environmental examination for the Project, including any update thereto, prepared and submitted by the Borrower and cleared by ADB;

  • Operation and Maintenance or “O&M” shall mean all activities required to operate, maintain, and monitor the effectiveness of the RA as specified in the SOW or any EPA-approved O&M Plan.

  • Dispute Resolution Process means the process described in clause 9

  • Initial appointment means appointment made otherwise than by promotion or transfer;

  • Monthly Minimum Removal Efficiency means the minimum reduction in the pollutant parameter specified when the effluent average monthly concentration for that parameter is compared to the influent average monthly concentration.

  • Internal Collaboration means collaborative arrangements within a group of companies or within various strategic business. units/subsidiaries/operating divisions in order to gain a strategic position whilst sharing resources, profits and losses as well as risks

  • Additional Servicer Each affiliate of each Servicer that services any of the Mortgage Loans and each Person who is not an affiliate of the any Servicer, who services 10% or more of the Mortgage Loans. For clarification purposes, the Master Servicer and the Securities Administrator are Additional Servicers.

  • Independent testing laboratory means an independent organization, accepted by the Contracting Officer, engaged to perform specific inspections or tests of the work, either at the site or elsewhere, and report the results of these inspections or tests.

  • Removal means a removal for disciplinary reasons from the student’s current educational placement other than a suspension and change in placement to an interim alternative educational setting (IAES) ordered by an impartial hearing officer because the student poses a risk of harm to himself or herself or others.

  • Complex or chronic medical condition means a physical,

  • COVID-19 symptoms means fever of 100.4 degrees Fahrenheit or higher, chills, cough, shortness of breath or difficulty breathing, fatigue, muscle or body aches, headache, new loss of taste or smell, sore throat, congestion or runny nose, nausea or vomiting, or diarrhea, unless a licensed health care professional determines the person’s symptoms were caused by a known condition other than COVID-19.