Cooling air definition

Cooling air means the clean, conditioned, and controlled air provided to the brake assembly by the climatic conditioning unit through the ducting as required during the test and described in this UN GTR.
Cooling air means the clean, conditioned, and controlled air provided to the brake assembly by the environmental conditioning system during the test through fixed and smooth ducts and the sampling tunnel.
Cooling air means the clean, conditioned, and controlled air provided to the brake assembly by the climatic conditioning unit during the test.

Examples of Cooling air in a sentence

  • Cooling air is moved through these two coolers with a specially selected engine fan.

  • Cooling air temperature and humidity sensors placed upstream of the brake enclosure per paragraphs 7.2.1.1. and 7.2.1.2.

  • Cooling air flows upward through the shaft countercurrently to the flow of the calcined product.

  • Cooling air shall be drawn into the enclosure along the engine and discharged out through a ducted fan discharge at the other end of the enclosure.

  • Cooling air to each MPC storage cavity is provided by four independent ducts.

  • Cooling air shall be drawn from the available air within the room.

  • Air Intakes• Cooling air intakes must be so constructed that there is NO forward projection/protrusion to catch or foul in the event of accident.

  • Dymola output: Cooling air mass flow rate and heat rejection for the condenser Table 2 presents simulation results compared to the measured values.

  • Cooling air is preheated by lime in the cooling zone and is withdrawn, de-dusted and re- injected via the combustion chambers.

  • This study conducted a literature review to identify the main determinants of ICT adoption and use in emergency management.

Related to Cooling air

  • Pooling Substation/ Pooling Point means a point where more than one Project may connect to a common Transmission System. Multiple Projects can be connected to a pooling substation from where common transmission system shall be constructed and maintained by the WPD(s) to get connected to the ISTS substation. The voltage level for such common line shall be 220 kV or above. Further, the metering of the pooled power shall be done at the injection point, i.e. the ISTS substation. However, the voltage level of transmission system of individual projects up to the pooling substation may be at 33 kV and above. Sub-meters shall be installed at the pooling substation for metering and forecasting and scheduling of individual Projects. The losses in the common transmission system up to the injection point shall be apportioned to the individual Projects for the purpose of billing.

  • Ambient air means that portion of the atmosphere, external to buildings, to which the general public has access.

  • Generator means a device that produces electricity.

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Sanitary Sewer Overflow or “SSO” means an overflow, spill, diversion, or release of wastewater from or caused by Akron’s Sanitary Sewer System. This term shall include: 1) discharges to waters of the State or United States from Akron's Sanitary Sewer System; and 2) any release of wastewater from Akron's Sanitary Sewer System to public or private property that does not reach waters of the State or the United States, including Building/Property Backups.

  • Sanitary Sewer System means all facilities, including approved LOSS, used in the collection, transmission, storage, treatment, or discharge of any waterborne waste, whether domestic in origin or a combination of domestic, commercial, or industrial wastewater. LOSS are only considered sanitary sewer systems if they are designed to serve urban densities. Sanitary sewer system is also commonly known as public sewer system.

  • Incinerator means any enclosed device that:

  • Cooling Off Period means the duration of time counted from the date when the direct seller and the direct selling entity enter into an agreement and ending with the date on which the contract is to be performed and within which direct seller may repudiate the agreement without being subject to penalty for breach of contract.

  • Modular building manufacturer means a person or corporation who owns or operates a