Cooling air temperature definition

Cooling air temperature means the temperature of the cooling air stream measured upstream of the brake enclosure.
Sample 1Sample 2Sample 3
Cooling air temperature means the temperature of the cooling air stream measured near the entry to the brake enclosure.
Sample 1Sample 2

Examples of Cooling air temperature in a sentence

  • Cooling air temperature and humidity sensors placed upstream of the brake enclosure per paragraphs 7.2.1.1. and 7.2.1.2.

  • Table 7.2. Summary of cooling air temperature, humidity, and flow requirementsParameter Cooling air temperature Cooling air relative humidity Cooling airflow Nominal value 23 ⁰C 50 % Set value (Qset) per paragraph 10.

  • Cooling air temperature, cooling water supply pressure and temperature for each cooler is monitored for alarm and trip of the machine for abnormal conditions.

  • The power values in the data table apply under the following conditions: • Continuous operation S1• Heating of the stator winding in accordance with thermal class F (without air filter, with air filter < thermal class H)• Cooling air temperature max.

  • Altitudes above 3300 feet.2. Cooling air temperature exceeds limits.3. Excessive load current harmonic factor.4. Operation above rated voltage or below rated frequency.5. Exposure to explosive environments.6. Exposure to fumes, vapors, or dust.7. Exposure to hot and humid climate or to excessive moisture, including steam, salt spray, and dripping water.8. Exposure to seismic shock or to abnormal vibration, shock, or tilting.9. Exposure to excessively high or low temperatures.10.

  • Cooling air temperature was defined to reproduce real engine temperature difference.Coolant to main flow pressure ratio was varied within 1.01–1.15 for investigation of flow discharge through vane cooling system and corresponded to real engine conditions.Characteristics of flow discharge were defined for leading and rear vane cavities and for each group of rows of film- cooling holes (leading edge, suction side, trailing edge).

  • In case of reduced cooling condition at higher altitudes or higher environmental temperatures, motor power should be changed according to tables below: Cooling air temperature °C Altitude above the sea level [m]20003000 Motors produced with protected windings for tropical work- ing conditions bear the marking ”TROPICALIZED”.

  • Cooling air temperature decreases as well, since the viscous dissipation due to disturbances also decreases through the flow field.

  • Table 7.2. Summary of cooling air temperature, humidity, and flow requirementsNominal value Average value: Maximum permissible tolerance Instantaneous values (1Hz): Maximum permissible tolerance Instantaneous values (1Hz): Permissible deviation beyond the maximum permissible tolerance Instantaneous values (1Hz): Maximum time exceeding the maximum permissible tolerance 7.2.1.1. Cooling Air Temperature Cooling air temperature at the measurement point shall be constant as defined below.

  • Cooling air temperature at the measurement point shall be constant throughout the entire brake emissions test.

Related to Cooling air temperature

  • Cooling Water means the water discharged from any use such as air conditioning, cooling or refrigeration, or to which the only pollutant added is heat.

  • Generator means a device that produces electricity.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • HVAC means heating, ventilation and air conditioning.

  • Sanitary Sewer System means all facilities, including approved LOSS, used in the collection, transmission, storage, treatment, or discharge of any waterborne waste, whether domestic in origin or a combination of domestic, commercial, or industrial wastewater. LOSS are only considered sanitary sewer systems if they are designed to serve urban densities. Sanitary sewer system is also commonly known as public sewer system.

  • Heating oil means petroleum that is No. 1, No. 2, No. 4-light, No. 4-heavy, No. 5-light, No. 5-heavy, and No. 6 technical grades of fuel oil; other residual fuel oils (including Navy Special Fuel Oil and Bunker C); and other fuels when used as substitutes for one of these fuel oils. Heating oil is typically used in the operation of heating equipment, boilers, or furnaces.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Engine under the Lease. The term "Engines" means, as of any date of determination, both Engines then leased to the Lessee pursuant to the Lease.

  • Ambient air means that portion of the atmosphere, external to buildings, to which the general public has access.

  • Ventilation means the supply of outside air into a building through window or other openings due to wind outside and convection effects arising from temperature, or vapour pressure differences (or both) between inside and outside of the building;

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.

  • Fire alarm system means a system designed to detect and annunciate the presence of fire, or by-products of fire. Fire alarm system includes smoke detectors.

  • Hot water means water at a temperature of 110°F. or higher.

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Ballast water means water with its suspended matter taken on board a ship to control trim, list, draught, stability or stresses of the ship.

  • Emergency generator means any generator of which the sole function is to provide emergency backup power during an interruption of electrical power from the electric utility. An emergency generator does not include: