Correlation factor definition

Correlation factor means a pollutant-specific multiplicative factor calculated by a manufacturer for an engine family or test group which establishes a relationship between chassis exhaust emission data, as determined from the test procedures specified in section 1960.1, 1961, or 1961.2, Title 13, California Code of Regulations, and engine exhaust emission data, as determined from the test procedures specified in section 1956.8, Title 13, California Code of Regulations.

Examples of Correlation factor in a sentence

  • Correlation factor for aggregate gradations from California Test 382 and LP-9.

  • Figure 28: Correlation between the level of organisational and entrepreneurial capital and the share of innovative service firms at national level DE BEGRLU PTEE 60% 55% Shareof innovativeservicefirms50% 45% 40% 35% 30% 25% 20% 15% 10%70 80 90 100 110 120 130Organizational and entrepreneurial capital Note: Correlation factor: r = 0.6009; p = 0.0065.Source: Based on CIS-5 data and The Sectoral Innovation Watch, Bruno et al.

  • The front of the cushion should be a minimum of 525 mm wide to allow for comfortable leg splay.

  • A mixed use scheme was recommended in the Planning Brief and the current scheme will provide a new community hall of 137.57 sq m (14.875 m long by 9.25 m wide) plus a meeting room of 16 sq m approx, kitchen of 7.7 sq m approx plus an entrance foyer/display area, ancillary toilet facilities and related ancillary café facilities.

  • Correlation factor between value of unit and value of benchmark index is a ratio, which shows statistical dependence between the values of unit and the values of benchmark index.

  • Correlation factor is equal to 0.3 (top), 0.6 (middle) and 0.9 (bottom).

  • The DSMC requires that studies submit all unexpected grade 3 and all grades 4 and 5 adverse events for review.

  • Figure (4.13), Correlation factor between average residual chlorine & Pin Worms diseases during summer season.

  • RESULTSTable 1: Correlation factor of safety standards with the patient safety performance Sig )significance level( r variable patient safety performance Regarding table 4, it may be conferred that there is a significant positive relation between safe clinical services and the patient safety performance in level 0.01.

  • Figure (4.16), Correlation factor between average residual chlorine & Giardiasis diseases during summer season.

Related to Correlation factor

  • Inflation Factor means a number determined for each tax year by dividing the consumer price index for June of the tax year by the consumer price index for June 2005.

  • Required Accumulation Factor Number shall be equal to a fraction, rounded upwards to the nearest whole number, the numerator of which is one and the denominator of which is equal to the lowest monthly principal payment rate on the Accounts, expressed as a decimal, for the three months preceding the date of such calculation.

  • Dilution Factors means, without duplication, with respect to any period, the aggregate amount of all deductions, credit memos, returns, adjustments, allowances, bad debt write-offs and other non-cash credits which are recorded to reduce accounts receivable in a manner consistent with current and historical accounting practices of the Borrower.

  • Limited Indexation Factor means, in respect of a Limited Indexation Month or Limited Indexation Date, as the case may be, the ratio of the Index Figure applicable to that month or date, as the case may be, divided by the Index Figure applicable to the month or date, as the case may be, twelve months prior thereto, provided that (a) if such ratio is greater than the Maximum Indexation Factor specified in the relevant Final Terms, it shall be deemed to be equal to such Maximum Indexation Factor and (b) if such ratio is less than the Minimum Indexation Factor specified in the relevant Final Terms, it shall be deemed to be equal to such Minimum Indexation Factor;

  • emission factor means the average emission rate of a greenhouse gas relative to the activity data of a source stream assuming complete oxidation for combustion and complete conversion for all other chemical reactions;

  • Accumulation Period Factor means, for any Collection Period, a fraction with:

  • Capacity Utilization Factor or “CUF” Shall have the same meaning as provided in CERC (Terms and Conditions for Tariff determination from Renewable Energy Sources) Regulations, 2009 as amended from time to time. Here, the CUF is expressed in AC terms.

  • Participation Factor means a percentage to be determined in the reasonable discretion of the Issuer (billiges Ermessen) (§ 315 BGB) on the Strike Date on the basis of the volatility of the Index and the market conditions prevailing on such date and will be published in accordance with § 14 hereof. The indication for the Participation Factor based on the market conditions as of 9 March 2018 is 200% (in any case, it will not be below 170%).

  • Stress Factor means 2.25.

  • Applicable Multiplier means, with respect to any Rate Period for any Series of RVMTP Shares, the percentage set forth opposite the applicable credit rating most recently assigned to such Series by the Rating Agency in the table below on the Rate Determination Date for such Rate Period: Long-Term Ratings* Fitch Applicable Multiplier AAA to AA- 100% A+ to A- 000% BBB+ to BBB- 140% *And/or the equivalent ratings of any other Rating Agency then rating the RVMTP Shares utilizing the highest of the ratings of the Rating Agencies then rating the RVMTP Shares.

  • Average Monthly Limit means the maximum allowable "Average Monthly Concentration" as defined in Section 22a-430-3(a) of the RCSA when expressed as a concentration (e.g. mg/l); otherwise, it means "Average Monthly Discharge Limitation" as defined in Section 22a-430-3(a) of the RCSA.

  • Loss Factor means the scaling factor determined in accordance with clause 7 and applied by the reconciliation manager to volumes of electricity measured or estimated in respect of ICPs on the Network, in order to reflect the impact of the ICP on Losses within the Network;

  • Adjustment Fraction shall have the meaning set forth in Section 11(a)(i) hereof.

  • Class Factor As to any date of determination and any Class of Certificates (other than the Interest Only Classes and the Residual Certificates), a fraction the numerator of which is (i) the aggregate of the denominations of all Certificates of such Class plus, in the case of each Accrual Class, all interest that has accrued on the Certificates of such Class prior to such date of determination and been added to the Class Balance thereof, less (ii) the aggregate amount of all Principal Distribution Amounts, if any, allocable thereto prior to such date of determination and the denominator of which is the original Class Balance of such Class. As to any date of determination and any Interest Only Class, a fraction, the numerator of which is the percentage of the balance specified for such purpose under “Reference Sheet–Notional Classes” in the Prospectus Supplement (or, if applicable, the sum of the applicable percentages of the balances so specified) and the denominator of which is the original Class Balance thereof. Code: The Internal Revenue Code of 1986, as amended, including any successor or amendatory provisions.

  • Leverage Factor means the leverage factor in respect of a Series of ETP Securities as specified in the relevant Final Terms.

  • Assigned protection factor or "APF" means the expected workplace level of respiratory protection that would be provided by a properly functioning respirator or a class of respirators to properly fitted and trained users. Operationally, the inhaled concentration can be estimated by dividing the ambient airborne concentration by the APF.

  • Controlled Accumulation Period Factor means, for each Monthly Period, a fraction, the numerator of which is equal to the sum of the series invested amounts as of the last day of the prior Monthly Period of all outstanding Series, and the denominator of which is equal to the sum (without duplication) of (a) the Series Invested Amount as of the last day of the prior Monthly Period, (b) the series invested amounts as of the last day of the prior Monthly Period of all outstanding Series (other than Series 1997-1) that are not expected to be in their revolving periods, and (c) the series invested amounts as of the last day of the prior Monthly Period of all other outstanding Series that are not Principal Sharing Series and are in their revolving periods.

  • Expansion Factor has the meaning ascribed thereto in Section 2.3(a);

  • Average value means the value which best represents the amount of the nutrient which a given food contains, and reflects allowances for seasonal variability, patterns of consumption and other factors which may cause the actual value to vary.

  • Weighting factor wT for an organ or tissue (T) means the proportion of the risk of stochastic effects resulting from irradiation of that organ or tissue to the total risk of stochastic effects when the whole body is irradiated uniformly. For calculating the effective dose equivalent, the values of wT are:

  • Accumulation Period Amount means $41,666,666.67; provided, however, if the Accumulation Period Length is determined to be less than twelve (12) months pursuant to Section 3.10(b)(ii) of the Indenture Supplement, the Accumulation Period Amount shall be the amount specified in the definition of “Accumulation Period Amount” in the Indenture Supplement.

  • Final Average Earnings means (a) divided by (b) as follows:

  • Fully Diluted Weighted Average Basis means, when calculating the number of Outstanding Units for any period, a basis that includes (a) the weighted average number of Outstanding Units during such period plus (b) all Partnership Interests and Derivative Partnership Interests (i) that are convertible into or exercisable or exchangeable for Units or for which Units are issuable, in each case that are senior to or pari passu with the Subordinated Units, (ii) whose conversion, exercise or exchange price, if any, is less than the Current Market Price on the date of such calculation, (iii) that may be converted into or exercised or exchanged for such Units prior to or during the Quarter immediately following the end of the period for which the calculation is being made without the satisfaction of any contingency beyond the control of the holder other than the payment of consideration and the compliance with administrative mechanics applicable to such conversion, exercise or exchange and (iv) that were not converted into or exercised or exchanged for such Units during the period for which the calculation is being made; provided, however, that for purposes of determining the number of Outstanding Units on a Fully Diluted Weighted Average Basis when calculating whether the Subordination Period has ended or Subordinated Units are entitled to convert into Common Units pursuant to Section 5.7, such Partnership Interests and Derivative Partnership Interests shall be deemed to have been Outstanding Units only for the four Quarters that comprise the last four Quarters of the measurement period; provided, further, that if consideration will be paid to any Group Member in connection with such conversion, exercise or exchange, the number of Units to be included in such calculation shall be that number equal to the difference between (x) the number of Units issuable upon such conversion, exercise or exchange and (y) the number of Units that such consideration would purchase at the Current Market Price.

  • Load Factor means the percentage of aircraft seats actually occupied on a flight (RPMs divided by ASMs). “NMB” means the National Mediation Board.

  • Opening Average Share Value means the average, over the trading days in the Opening Average Period, of the closing price of a company’s stock multiplied by the Accumulated Shares for each trading day during the Opening Average Period.

  • Calculation Rate For each Distribution Date, in the case of the Class A and Class B Interests, the product of (i) 10 and (ii) the weighted average rate of the outstanding Class A and Class B Interests, treating each Class A Interest as capped at zero or reduced by a fixed percentage of 100% of the interest accruing on such Class.