Digital Subscriber Line Access Multiplexer (DSLAM definition

Digital Subscriber Line Access Multiplexer (DSLAM means an equipment which allows copper lines to support broadband access. It is network equipment, normally located in the local exchange (but may also be installed in a street cabinet) whose function is to aggregate the traffic of several access lines which have modems that are compatible with xDSL technology and relay it through the data network (core). By placing additional remote DSLAMs at locations remote to the telephone exchange, electronic communications companies are able to provide DSL service to locations previously beyond effective range.10
Sample 1

Examples of Digital Subscriber Line Access Multiplexer (DSLAM in a sentence

  • The Splitter may be directly integrated into the Digital Subscriber Line Access Multiplexer (DSLAM) equipment or may be externally mounted.

  • The equipment consists of Digital Subscriber Line Access Multiplexer (DSLAM) located in the CO and the corresponding remote "modem" unit located at the Customer premises.

  • The equipment consists of Digital Subscriber Line Access Multiplexer (DSLAM) located in the CO and the corresponding remote “modem” unit located at the customer premises.

  • The equipment consists of Digital Subscriber Line Access Multiplexer (DSLAM) located in the CO and the corresponding remote “modem” unit located at the Customer premises.

  • DSL consists of central office equipment (a Digital Subscriber Line Access Multiplexer (DSLAM)) and existing copper or fiber facilities extended from the Company’s central office to the Customer’s premises.

  • The equipment consists of Digital Subscriber Line Access Multiplexer (DSLAM) located in the CO and the corresponding remote "modem" unit located at the Customer premises.3.2 InstallationInstallation of DSL Services will be from the CO to the surge protector located within the Network Interface Device (NID).

  • Traditionally, access networks consist largely of pairs of copper wires, each traveling in a direct path typically between a Digital Subscriber Line Access Multiplexer (DSLAM) and the customer.

  • With most DSL technologies today, a high-speed signal is sent from the end-user's terminal through the last 100 feet and the last mile (sometimes a few miles) consisting of the copper loop until it reaches a Digital Subscriber Line Access Multiplexer (DSLAM), usually located in the carrier’s central office.

  • In this case, the incumbent continues to provide voice (or other) services to its customers as the shared access loop is connected to its network, while the Digital Subscriber Line Access Multiplexer (DSLAM) is operated by the new entrant.

  • The following physicians signed as supervising physicians: Wallace C.

Related to Digital Subscriber Line Access Multiplexer (DSLAM

  • Digital Subscriber Line (DSL means as defined in Attachment 14 - xDSL Loops.

  • Interconnection Activation Date means the date that the construction of the joint facility Interconnection arrangement has been completed, trunk groups have been established, joint trunk testing is completed and trunks have been mutually accepted by the Parties.

  • User Interface(s means any technologies thatiii. Customer owns and/or for which Customer has secured an appropriate license/subscription and is/areiv. used to develop/manage user interaction features and characteristics for ERP. Solely for clarity regarding ERP licensing requirements under a contract, User Interfaces for ERP shall be deemed part of ERP and therefore require human users Using ERP via such User Interfaces to have a “Named User” and/or “User” license for ERP, as applicable.

  • Generation Interconnection Request means a request by a Generation Interconnection Customer pursuant to Tariff, Part IV, subpart A, to interconnect a generating unit with the Transmission System or to increase the capacity of a generating unit interconnected with the Transmission System in the PJM Region.

  • Digital Signal Level 3 (DS-3 means the 44.736 Mbps third level signal in the time division multiplex hierarchy.

  • Generation Interconnection Customer means an entity that submits an Interconnection Request to interconnect a new generation facility or to increase the capacity of an existing generation facility interconnected with the Transmission System in the PJM Region. Generation Interconnection Request:

  • Micro wireless facility means a small cell facility that is not larger in dimension than 24 inches in length, 15 inches in width, and 12 inches in height and that has an exterior antenna, if any, not longer than 11 inches.

  • Signaling Transfer Point (“STP”) means a signaling point that performs message routing functions and provides information for the routing of messages between signaling points within or between CCIS networks. An STP transmits, receives and processes CCIS messages.

  • Digital Signal Level 0 (DS-0 means the lowest-level signal in the time division multiplex digital hierarchy, and represents a voice-grade channel operating at either the 56 Kbps or 64 Kbps transmission bit rates. There are twenty-four (24) DS-0 channels in a DS-1.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Digital Signal Level 3 or "DS3" means the 44.736 Mbps third-level in the time-division multiplex hierarchy. In the time-division multiplexing hierarchy of the telephone network, DS3 is defined as the third level of multiplexing.

  • Digital Signal Level 1 (DS-1 means the 1.544 Mbps first level signal in the time division multiplex hierarchy.

  • Multiple Exchange Carrier Access Billing or “MECAB” means the document prepared by the Billing Committee of the OBF, which functions under the auspices of the Carrier Liaison Committee (CLC) of the Alliance for Telecommunications Industry Solutions (ATIS). The MECAB document, published by ATIS as ATIS/OBF-MECAB- Issue 6, February 1998, contains the recommended guidelines for the billing of access services provided to an IXC by two (2) or more LECs, or by one LEC in two (2) or more states within a single LATA.

  • Loop Concentrator/Multiplexer or "LCM" is the Network Element that does one or more of the following: aggregates lower bit rate or bandwidth signals to higher bit rate or bandwidth signals (multiplexing); disaggregates higher bit rate or bandwidth signals to lower bit rate or bandwidth signals (demultiplexing); aggregates a specified number of signals or channels to fewer channels (concentrating); performs signal conversion, including encoding of signals (e.g., analog to digital and digital to analog signal conversion); or in some instances performs electrical to optical (E/O) conversion. LCM includes DLC, and D4 channel banks and may be located in Remote Terminals or Central Offices.

  • Incremental Rights-Eligible Required Transmission Enhancements means Regional Facilities and Necessary Lower Voltage Facilities or Lower Voltage Facilities (as defined in Tariff, Schedule 12) and meet one of the following criteria: (1) cost responsibility is assigned to non-contiguous Zones that are not directly electrically connected; or (2) cost responsibility is assigned to Merchant Transmission Providers that are Responsible Customers.

  • Connectivity means the provision of a Permanent Separated Bicycle Lane system that reflects desired routes between all major origins and destinations in the city.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.2.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • User Interface means the interface for the Hosted Services designed to allow individual human users to access and use the Hosted Services.

  • Synchronous Optical Network (SONET means the optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC 1/STS 1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Digital Signal Level 0 or "DS0" means the 64 Kbps zero-level signal in the time-division multiplex hierarchy.

  • Digital Signal Level means one of several transmission rates in the time division multiplex hierarchy.

  • Variable-aperture beam-limiting device means a beam-limiting device which has capacity for stepless adjustment of the x-ray field size at a given SID.

  • Expiry Date (Data di Scadenza) means the "Expiry Date" as specified in § 1 of the Product and Underlying Data.

  • Web spray adhesive means any aerosol adhesive that is not a mist spray or special purpose spray adhesive.