Dressed Engine definition

Dressed Engine means a “Dressed Trent 772B Engine” as defined in section A.2.1.3 of the Specification. “Documentation” means all airworthiness documentation for Products as required by the applicable Airworthiness Authority including, but not limited to, Log Books, the EASA Form 1/FAA Form 8130-3 serviceable tag, certificate of compliance, and tags for such Products indicating Time since New (TSN), Cycles Since New (CSN), calendar time, including Aircraft effectivity, as applicable.
Dressed Engine means an Engine to the Dressed Engine configuration as defined in the Specification
Dressed Engine means the Rolls-Xxxxx Xxxxx 772B turbofan engines [**]

Examples of Dressed Engine in a sentence

  • The Dressed Engine is constructed and tested under Rolls-Royce Inspection, as approved by JAA/FAA in accordance with JAR-E/FAR Part 33 Requirements.

  • The following describes module assemblies and the Dressed Engine.


More Definitions of Dressed Engine

Dressed Engine means an Engine to the Dressed Engine configuration as defined in the Specification “EASA” means the European Aviation Safety Agency and any successor agency thereto,

Related to Dressed Engine

  • Diesel engine means an engine which works on the compression-ignition principle.

  • Nonroad Engine means an internal combustion engine (including the fuel system) that is not used in a Motor Vehicle or a vehicle used solely for competition, or that is not subject to standards promulgated under section 7411 or section 7521 of title 42 of the United States Code, except that this term shall apply to internal combustion engines used to power generators, compressors or similar equipment used in any construction program or project.

  • Engine Manufacturer means CFM International, Inc.

  • Compression ignition engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Dual-Fuel Engine means an engine that is designed to simultaneously operate with a liquid fuel and a gaseous fuel, both fuels being metered separately, the consumed amount of one of the fuels relative to the other one being able to vary depending on the operation;

  • Digital audio-visual work means a series of related images which, when shown in succession, imparts an impression of motion, together with accompanying sounds, if any.

  • Nationwide Mortgage Licensing System and Registry means a mortgage licensing system developed and maintained by the conference of state bank supervisors and the American association of residential mortgage regulators for the licensing and registration of licensed mortgage loan originators.

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Clinical nurse specialist means a registered nurse with relevant post-basic qualifications and 12 months’ experience working in the clinical area of his/her specified post-basic qualification, or a minimum of four years’ post-basic registration experience, including three years’ experience in the relevant specialist field and who satisfies the local criteria.

  • Internal combustion engine or ‘engine’ means an energy converter, other than a gas turbine, designed to transform chemical energy (input) into mechanical energy (output) with an internal combustion process; it includes, where they have been installed, the emission control system and the communication interface (hardware and messages) between the engine's electronic control unit(s) and any other powertrain or non-road mobile machinery control unit necessary to comply with Chapters II and III;

  • Tobacco product manufacturer means an entity that after the date of enactment of this Act directly (and not exclusively through any affiliate):

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Spray buff product means a product designed to restore a worn floor finish in conjunction with a floor buffing machine and special pad.

  • Engine under the Lease. The term "Engines" means, as of any date of determination, both Engines then leased to the Lessee pursuant to the Lease.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Virtual Machine means a software container that can run its own operating system and execute applications like a physical machine.

  • Sewage sludge fee weight means the weight of sewage sludge, in dry U.S. tons, excluding admixtures such as liming materials or bulking agents. Annual sewage sludge fees, as per section 3745.11(Y) of the Ohio Revised Code, are based on the reported sludge fee weight for the most recent calendar year.

  • Tomographic plane means that geometric plane which is identified as corresponding to the output tomogram.

  • Value Engineering (VE) means a discipline of engineering that studies the relative monetary values of various materials and construction techniques, including the intial cost, maintenance cost, energy usage, replacement cost, and life expectancy of the materials, equipment or systems under consideration.

  • external engineering service means an engineering service situated outside the boundaries of a land area and that is necessary to serve the use and development of the land area;

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • COVID-19 symptoms means fever of 100.4 degrees Fahrenheit or higher, chills, cough, shortness of breath or difficulty breathing, fatigue, muscle or body aches, headache, new loss of taste or smell, sore throat, congestion or runny nose, nausea or vomiting, or diarrhea, unless a licensed health care professional determines the person’s symptoms were caused by a known condition other than COVID-19.

  • Uniform Single Attestation Program for Mortgage Bankers The Uniform Single Attestation Program for Mortgage Bankers, as published by the Mortgage Bankers Association of America and effective with respect to fiscal periods ending on or after December 15, 1995.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.