Drop and Insert definition

Drop and Insert. That process wherein a part of the information carried in a transmission system is demodulated (dropped) at an intermediate point and different information is entered (inserted) for subsequent transmission.
Sample 1Sample 2Sample 3
Drop and Insert. The characteristic and ability of telephone circuits to be readily added at intermediate points along a network.
Sample 1

Examples of Drop and Insert in a sentence

  • The network will employ two (X2) sizes of Hand-hole chambers: 600mm diameter x 600mm depth and 900mm diameter x 1000mm depth chambers.The 600mm chambers are used to facilitate the splicing of the OFC 96 Core cable for Drop and Insert of signals at every Access point.

  • This capacity shall be delivered in DS-1 increments with appropriate Drop and Insert characteristics as defined under the T-1 channelization plan which has been prepared as part of PathNet's initial evaluation of Texaco's system, and is appended hereto as Schedule D.

  • Such capacity shall in no event exceed Incumbent Initial Allocation of Capacity and shall be subject to Drop and Insert capacity at each Switched Mod Section.

  • The re­ quest must be in writing, contain all pertinent facts concerning the question presented, and may contain a statement of the taxpayer's views concerning the correct application of the law.

  • Purchaser may change the United Kingdom or Japan landing points of the Prime STM-1 or any Prime DS-3 or the landing points of any Drop and Insert at any time after it has been fully activated (provided that within the Prime STM-1 or each Prime DS-3 the STM-1s or DS-3s, as applicable, remain concatenated).

  • The NETIP network will employ two (X2) sizes of Hand-hole chambers: 600mm diameter x 600mm depth and 900mm diameter x 1000mm depth chambers.The 600mm chambers are used to facilitate the splicing of the OFC 96 Core cable for Drop and Insert of signals at every Access point.

  • Such capacity (i) shall in no event exceed [***] and (ii) shall be subject to Drop and Insert capacity at each Switched Mod Section.

  • Texaco has the ability to move, add or change, its capacity as required along the network provided sufficient circuit Drop and Insert capacity exists at each Facility.

  • This digital system will have Drop and Insert capabilities as defined in SCHEDULE D -- T-1 CHANNEL PLAN, and SCHEDULE G -- MULTIPLEXING CONCEPT, attached hereto.

  • Purchaser shall pay the required charges for each Drop and Insert prior to its activation.

Related to Drop and Insert

  • Declarations Page means the Declarations Page applicable to this Form.

  • Insert means a foot mold or orthosis constructed of more than one layer of a material that:

  • Probationary status means the 12-month period following

  • Deleted – Not Applicable means that section is not applicable or included in this RFP. This is used as a placeholder to maintain consistent numbering.

  • Valuation of Unpaid works shall have the meaning set forth in Clause 23.5;

  • Total Assets under Management is the total average assets under management for the month for all Accounts or portions thereof for which all investment advisers (including the Adviser) to which FASC provides that Category of Services act as investment adviser or subadviser and which utilize the Category of Services. “Applicable Margin” is 0.10.

  • Credit Available for Virtual Transactions means the Market Participant’s Working Credit Limit for Virtual Transactions calculated on its credit provided in compliance with its Peak Market Activity requirement plus available credit submitted above that amount, less any unpaid billed and unbilled amounts owed to PJMSettlement, plus any unpaid unbilled amounts owed by PJMSettlement to the Market Participant, less any applicable credit required for Minimum Participation Requirements, FTRs, RPM activity, or other credit requirement determinants as defined in Tariff, Attachment Q.

  • Inclusionary development means a development containing both affordable units and market rate units. This term includes, but is not necessarily limited to: new construction, the conversion of a non-residential structure to residential and the creation of new affordable units through the reconstruction of a vacant residential structure.

  • Automatic Location Identification Gateway or "ALI Gateway" is a computer facility into which CLEC delivers Automatic Location Identification (ALI) data for CLEC Customers. Access to the ALI Gateway will be via a dial-up modem using a common protocol. "Automatic Number Identification" or "ANI" is the Billing telephone number associated with the access line from which a call originates. ANI and Calling Party Number (CPN) usually are the same number. "Automatic Route Selection" or "ARS" is a service feature that provides for automatic selection of the least expensive or most appropriate transmission facility for each call based on criteria programmed into a circuit Switch routing table or system.

  • Applicable Unused Line Fee Percentage means, as of any date of determination, the applicable percentage set forth in the following table that corresponds to the Average Revolver Usage of Borrowers for the most recently completed month as determined by Agent in its Permitted Discretion; provided, that for the period from the Closing Date through and including the last day of the third full calendar month following the Closing Date, the Applicable Unused Line Fee Percentage shall be set at the rate in the row styled “Level II”; provided further, that any time an Event of Default has occurred and is continuing, the Applicable Unused Line Fee Percentage shall be set at the margin in the row styled “Level II”: I > 50% of the Maximum Revolver Amount 0.375 percentage points II ≤ 50% of the Maximum Revolver Amount 0.50 percentage points The Applicable Unused Line Fee Percentage shall be re-determined on the first date of each month by Agent.

  • Investment Restrictions means the investment restrictions of the Fund as set forth in the Declaration of Trust including, without limitation, those described in section 2.0 of this Annual Information Form.

  • Concentration Limitations Limitations satisfied on each Measurement Date on or after the Effective Date and during the Reinvestment Period if, in the aggregate, the Collateral Obligations owned (or in relation to a proposed purchase of a Collateral Obligation, owned and proposed to be owned) by the Issuer comply with all of the requirements set forth below (or in relation to a proposed purchase after the Effective Date, if any such requirement is not satisfied, the level of compliance with such requirement is maintained or improved after giving effect to the purchase), calculated in each case as required by Section 1.3 herein:

  • Automatic Location Identification or "ALI" is the automatic display at the Public Safety Answering Point (PSAP) of the caller's telephone number, the address/location of the telephone and supplementary emergency services information for Enhanced 911 (E911).

  • Assets Under Management means, as of any specified date, the value of all Assets owned by the Partnership (the value to be determined as provided in this Agreement), including contributions requested and due from Partners and uncalled amounts of Commitments that are included in the Partnership’s regulatory capital (as such term is used in the SBIC Act), less the amount of any liabilities of the Partnership, determined in accordance with generally accepted accounting principles, consistently applied.

  • Applicable Unused Line Fee Margin means the per annum fee, from time to time in effect, payable in respect of Borrowers’ non-use of committed funds pursuant to Section 1.9(b), which fee is determined by reference to Section 1.5(a).

  • Annual Fixed Dividend Rate means, for any Subsequent Fixed Rate Period, the annual rate (expressed as a percentage rate rounded down to the nearest one hundred-thousandth of one percent (with 0.000005% being rounded up)) equal to the sum of the Government of Canada Yield on the applicable Fixed Rate Calculation Date plus 2.16%.

  • Availability Reserves means, without duplication of any other Reserves or items that are otherwise addressed or excluded through eligibility criteria, such reserves as the Agent from time to time determines in its discretion as being appropriate (a) to reflect the impediments to the Agent’s ability to realize upon the Collateral, (b) to reflect claims and liabilities that the Agent determines may need to be satisfied in connection with the realization upon the Collateral, (c) to reflect criteria, events, conditions, contingencies or risks which the Agent believes in good faith could adversely affect any component of the Borrowing Base, or the assets, business, financial performance or financial condition of any Loan Party, or (d) to reflect that a Default or an Event of Default then exists. Without limiting the generality of the foregoing, Availability Reserves may include, in the Agent’s discretion, (but are not limited to) reserves based on: (i) rent; (ii) customs duties, and other costs to release Inventory which is being imported into the United States; (iii) outstanding Taxes and other governmental charges, including, without limitation, ad valorem, real estate, personal property, sales, claims of the PBGC and other Taxes which may have priority over the interests of the Agent in the Collateral; (iv) salaries, wages and benefits due to employees of any Borrower, (v) Customer Credit Liabilities, (vi) customer deposits, (viii) reserves for reasonably anticipated changes in the Appraised Value of Eligible Inventory between appraisals, (viii) warehousemen’s or bailee’s charges and other Permitted Encumbrances which may have priority over the interests of the Agent in the Collateral, (ix) amounts due to vendors on account of consigned goods, (x) Cash Management Reserves, (xi) Bank Products Reserves and (xii) royalties payable in respect of licensed merchandise.

  • Incremental Available Transfer Capability Revenue Rights means the rights to revenues that are derived from incremental Available Transfer Capability created by the addition of Merchant Transmission Facilities or of one of more Customer-Funded Upgrades.

  • Available Date means the date upon which Licensor notifies MSDH that the Software may be accessed on the Licensor’s ASP server and MSDH may begin acceptance testing.

  • Designated Payment/Transfer Office means (i) with respect to the initial Paying Agent/Registrar named herein, its office in Dallas, Texas, or at such other location designated by the Paying Agent/Registrar and (ii) with respect to any successor Paying Agent/Registrar, the office of such successor designated and located as may be agreed upon by the City and such successor.

  • Significant emissions increase means, for a regulated NSR pollutant, an increase in emissions that is significant, as defined in subsection (ww), for that pollutant.

  • SOFR Index Cessation Effective Date means, in relation to a SOFR Index Cessation Event, the date on which the Federal Reserve Bank of New York (or any successor administrator of the daily Secured Overnight Financing Rate) ceases to publish the daily Secured Overnight Financing Rate, or the date as of which the daily Secured Overnight Financing Rate may no longer be used;

  • Outside Reference Date Not applicable.

  • Available Tenor means, as of any date of determination and with respect to the then-current Benchmark, as applicable, any tenor for such Benchmark or payment period for interest calculated with reference to such Benchmark, as applicable, that is or may be used for determining the length of an Interest Period pursuant to this Agreement as of such date and not including, for the avoidance of doubt, any tenor for such Benchmark that is then-removed from the definition of “Interest Period” pursuant to clause (f) of Section 2.14.

  • Cover Page means the top page of the original solicitation on which the solicitation is identified by number. Offerors are cautioned that Amendments may modify information provided on the Cover Page.

  • ZERO DATE means the date of issue of LETTER OF INTENT (LOI) or issue of WORK ORDER, whichever is earlier.