Engine crankcase definition

Engine crankcase means the spaces in or external to an engine which are connected to the oil sump by internal or external ducts through which gases and vapour can escape;
Sample 1Sample 2Sample 3
Engine crankcase means the spaces in or external to an engine which are connected to the oil sump by internal or external ducts through which gases and vapour can escape.
Sample 1Sample 2Sample 3
Engine crankcase means the spaces in or external to an engine which are connected to the oil sump by internal or external ducts through which gases and vapour can escape; 3.5.8 ‘Evaporative emissions’ means the hydrocarbon vapours lost from the fuel system of a vehicle other than those from exhaust emissions meaning the hydrocarbon vapours lost from the fuel tank and fuel supply system of a motor vehicle and not those from tailpipe emissions; 3.5.9 ‘Electronic throttle control’ (ETC) means the control system consisting of sensing of rider input via the accelerator pedal or handle, data processing by the control unit(s), resulting actuation of the throttle and throttle position feedback to the control unit in order to control the air charge to the combustion engine; 3.5.10 ‘Exhaust emissions’ means tailpipe emissions of gaseous pollutants and particulate matter; 3.5.11 ‘Exhaust system’ means the combination of the exhaust pipe, the expansion box, the exhaust silencer and pollution control device(s), as applicable; 3.6.1 ‘Fuel trim’ refers to feedback adjustments to the base fuel schedule; 3.6.2 ‘Flex fuel H2NG’ vehicle’ means a flex fuel vehicle designed to run on different mixtures of hydrogen and natural gas or bio-methane; 3.6.3 ‘Fuel cell’ means a converter of chemical energy from hydrogen into electric energy for propulsion of the vehicle; 3.6.4 ‘Fuel feed system’ means the set of components including and between fuel storage and air-fuel blending or injecting device(s); 3.6.5 ‘Fuel tank breathing losses’ means hydrocarbon emissions caused by temperature changes in the fuel tank; 3.6.6 ‘Fuel tank’ means a type of energy storage system that stores the fuel; 3.6.7 ‘Flex fuel vehicle’ means a vehicle with one fuel storage system that can run on different mixtures of two or more fuels; 3.6.8 ‘Flex fuel biodiesel vehicle’ means a flex fuel vehicle that can run on mineral diesel or a mixture of mineral diesel and biodiesel; 3.6.9 ‘Free acceleration test’ means the test conducted by abruptly but not violently, accelerating the vehicle from idle to full speed with the vehicle stationary in neutral gear; 3.6.10 ‘Flex fuel ethanol vehicle’ means a flex fuel vehicle that can run on petrol or a mixture of petrol and ethanol up to an 85/100 per cent ethanol blend (E85/E100); 3.7.1 ‘Gross vehicle weight (GVW)’ Means the technically permissible maximum weight declared by the vehicle manufacturer. In case of the 3 wheeled vehicles designed to be coupled to a semi-trailer, the mass GVW...
Sample 1Sample 2Sample 3

Related to Engine crankcase

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Engine Manufacturer means CFM International, Inc.

  • Double Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in two or more distinct phases that requires the product container be shaken before use to mix the phases, producing an emulsion.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Landing Gear means the installed main and nose landing gear, components and their associated actuators, side braces and parts.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Propeller means for a device for propelling an aircraft that has blades on a powerplant driven shaft and that, when rotated, produces by its action on the air, a thrust approximately perpendicular to its plane of rotation and it includes control components normally supplied by its manufacturer, but does not include main and auxiliary rotors or rotating airfoils of powerplants;

  • Engine under the Lease. The term "Engines" means, as of any date of determination, both Engines then leased to the Lessee pursuant to the Lease.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Fixed wing turbine powered aircraft means an aircraft that:

  • Expanded polystyrene means blown polystyrene and expanded

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Motor-driven cycle means every motorcycle that has a gasoline engine that (i) displaces less than

  • Engines means, as of any date of determination, all Engines then leased hereunder.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • PNode has the meaning set forth in the CAISO Tariff.

  • Polystyrene foam means blown polystyrene and expanded and

  • Compression ignition engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Ambient air means that portion of the atmosphere, external to buildings, to which the general public has access.

  • Weapons system supplier means any prime contractor or first tier subcontractor engaged in, or having a known prospective interest in the development, production or analysis of any of the weapon systems, as well as any major component or subassembly of such system.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Electric bicycle means a “class 1 electric bicycle”, a “class 2 electric bicycle”, or a “class 3 electric bicycle” as defined in this section. (ORC 4511.01(RRR))

  • Cathode ray tube or “CRT” means a vacuum tube, composed primarily of glass, which is the visual or video display component of an electronic device. A “used, intact CRT” means a CRT whose vacuum has not been released. A “used, broken CRT” means glass removed from its housing or casing whose vacuum has been released.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.

  • Planned Financed Generation Capacity Resource means a Planned Generation Capacity Resource that, prior to August 7, 2015, has an effective Interconnection Service Agreement and has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close.