Flow pressure definition

Flow pressure means the pressure in the water supply pipe near the faucet or water outlet while the faucet or water outlet is wide-open and flowing.
Sample 1Sample 2Sample 3

Examples of Flow pressure in a sentence

  • C1: Material selection, C2: Geometry and tolerances, C3: Dimensioning according to design guidelines, C4: Dimensioning according to specifications, C5: Structural calculations, and C6: Flow, pressure, and temperature calculations.

  • Flow, pressure, temperature, humidity/dew point and multi-sensor instruments can be added to the system if desired.

  • UNIT – VEnergy Conservation and Waste Minimization: Energy conservation in Boilers; Waste minimization, Classification and its methodology; Economical viability of waste minimizationInstrumentation & Control: Process instrumentation, Control and Monitoring- Flow, pressure and temperature measurement and Types of Instruments for Process Control and Monitoring TEXTBOOKS1.

  • Please note that the table provides the date for each update (i.e. the creation dates for the auxiliary calibration files) but does not show the applicable time period for each update.

  • Effect/100)*(PStaticCal Where:Fp PEffect PStatic PCal = Flow pressure effect compensation factor= Pressure effect in percent psi= Measurement fluid static pressure in psi= Calibration static pressure in psi For gas applications, the measurement accuracy of density measured by a Coriolis meter is relative to a liquid densitometer’s accuracy, this does not meet the accuracies required for gas measurement.

  • The thermostat was set in the Hansgrohe factory under the following conditions:– Flow pressure 3 bar– Temperature difference 50°K Perform thermostat adjustment:– Switch on consumer (hand shower)– Turn scale knob until 38°C water emerges– Loosen knob screw– Pull knob back and set to 38°C– Attach knob and tighten knob screw.

  • Flow pressure was measured both before and after the cloth filter.

  • Flow, pressure, and temperature data were recorded immediately before the system was shut down for cleaning and immediately upon return to membrane operation after cleaning procedure was complete.

  • Fracturing is induced during the course of injection and these fractures grow with time.The basic principle of thermal fracture model is:  Flow, pressure, temperature supplied by an injection Rock mechanics of fracture7.1.2 Effect of particle plugging The concetrantion of injected particles has an effect in initation and propagation of fractures.

  • Computation achieve steadiness in second quarter of rotation.Figure X combined pressure & IJLvRET elocity contours of SST model Figure XI Flow Velocity in different model Figure XII Flow pressure for all models Figure XIIshows extent of velocities at different points in computational space for all three models at different time(which also shows angular displacement of rotor).

Related to Flow pressure

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Vapor pressure as herein used means Vapor Pressure at 100° Fahrenheit as determined by ASTM Method D-323-90, "Standard Method of Test for Vapor Pressure of Petroleum Products (Reid Method)."

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Pressure means relative pressure versus atmospheric pressure, unless otherwise stated.

  • Low water pressure means water pressure below the regulatory reference level which is the minimum pressure when demand on the system is not abnormal.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Pressure vessel means a vessel that may be used for containing, storing, distributing, transferring, distilling, processing or otherwise handling any gas, vapour or liquid under pressure greater than the atmospheric pressure and includes any pipeline fitting or other equipment attached thereto or used in connection therewith; and

  • Attachment point means a point on the network at which network assets are connected to assets owned by another person.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • Working pressure means the settled pressure of a compressed gas at a reference temperature of 15 °C in a full pressure receptacle;

  • Delivery Points means: (i) for natural gas transported by interstate pipelines, the city gate stations of your Utility, and (ii) for electricity, one or more points at which Company, as your agent, has arranged for the delivery of electricity to a third party (such as your Utility) for your account or at your premises.

  • Delivery Point means the point(s) of connection(s) at which energy is delivered into the Grid System i.e. the Interconnection Point.

  • design pressure means the maximum pressure that a pressure vessel or plant is designed to withstand safety when operating normally;

  • Feedstock Gas means natural gas used as a raw material for its chemical properties in creating an end product.

  • Positive pressure respirator means a respirator in which the pressure inside the respiratory inlet covering exceeds the ambient air pressure outside the respirator.

  • Receipt Point(s) means the receipt points set forth in Section 6 of this Toll Schedule.

  • Receipt Point means the receipt/inception point(s) where Crude Oil is received into the Gathering System, as such points are specified in Section II of this tariff.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Feedstock means any controlled substance or new substance that undergoes chemical transformation in a process in which it is entirely converted from its original composition and whose emissions are insignificant,

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Slash means all debris created on the Work area by the precommercial thinning operation.