Fluid Solutions definition

Fluid Solutions means fluid storage, transfer, and/or treatment, and includes but is not limited to, the rental of Tanks, pumps, filtration, and any accessories, attachments, or other items delivered to Customer, as well as any ancillary services thereto. Fluid Solutions may include the design, installation, operation, ongoing maintenance, monitoring, and dismantling of the Fluid Solutions system (“Fluid Solutions Services’). Customer shall provide accurate measurements, specifications and any supporting documentation to assist in the Fluid Solutions Services as requested by United. Unless otherwise agreed to by the parties, Customer shall (i) have adequate lifting equipment on site to load and unload during set up and break down; (ii) insert, remove and maintain sewer pipe plugs and suction screens as necessary; (iii) provide any and all containment and required matting; (iv) obtain any and all rights of way, permits, and easements as necessary; (v) provide adequate staging areas, water sources, and access thereto; (vi) provide necessary controls of erosion, odor and traffic, including site restoration, as necessary; (vii) provide fuelling and/or adequate power, including cable and an electrician, as necessary; (viii) perform daily inspection and maintenance of the Equipment during the Rental Period (except that Customer shall not be required to perform maintenance of Equipment with a diesel engine); and (ix) provide access at all times to the Fluid Solutions system and a clean, unobstructed and safe area to perform the Fluid Solutions Services.
Fluid Solutions means fluid storage, transfer, and/or treatment, and includes but is not limited to, pumps, filtration, and any accessories, attachments, or other items delivered to Lessee and rented as Equipment, as well as any ancillary services thereto. Fluid Solutions may include the design, installation, operation, ongoing maintenance, monitoring, and dismantling of the Fluid Solutions system (“Fluid Solutions Services”).
Fluid Solutions means fluid storage, transfer, and/or treatment, and includes but is not limited to, the rental of Tanks, pumps, filtration, and any accessories, attachments, or other items delivered to Customer, as well as any ancillary services thereto. Fluid Solutions may include the design, installation, operation, ongoing maintenance, monitoring, and dismantling of the Fluid Solutions system (“Fluid Solutions Services’). Customer shall provide accurate measurements, specifications and any supporting documentation to assist in the Fluid Solutions Services as requested by RYCO Landscape Supply, Inc. Unless otherwise agreed to by the parties, Customer shall (i) have adequate lifting equipment on site to load and unload during set up and break down; (ii) insert, remove and maintain sewer pipe plugs and suction screens as necessary; (iii) provide any and all containment and required matting; (iv) obtain any and all rights of way, permits, and easements as necessary; (v) provide adequate staging areas, water sources, and access thereto; (vi) provide necessary controls of erosion, odor and traffic, including site restoration, as necessary; (vii) provide fueling and/or adequate power, including cable and an electrician, as necessary; (viii) perform daily inspection and maintenance of the Equipment during the Rental Period; and (ix) provide access at all times to the Fluid Solutions system and a clean, unobstructed and safe area to perform the Fluid Solutions Services.

Examples of Fluid Solutions in a sentence

  • Organization and Basis of Presentation Genesis Fluid Solutions, Ltd.

  • Customer acknowledges that, due to the nature of the Fluid Solutions Services which are tailored to specific information and data, in the event of such material change, it is imperative that Customer immediately respond to any request for Emergency Change Order to avoid a spill or other incident.

  • Unless specifically agreed to in the Scope, Customer, at its cost and expense, shall obtain all required building and construction permits, inspections, or certificates, as well as any permissions and authority necessary to perform the Fluid Solutions Services.

  • Upon engagement, a fee of 100,000 warrants to purchase Genesis Fluid Solutions common stock, with a $1.00 strike price shall be issued to GW.

  • USA for CAD 58 million on January 20, 2017.02/23/2017Zhongding Europe GmbHTriStone FlowtechTrelleborg AB, Fluid Solutions Business comprises fluid solutions for engine cooling and air supply solutions.

  • The Company shall indemnify Executive for all legal costs and judgments which may arise in conjunction with the sale of the Genesis Fluid Solutions subsidiary of the Company.

  • Genesis Fluid Solutions grants GW right of first refusal on a non-exclusive basis to act as the Company’s Investment Banker/Financial Advisor on any financings in the next twelve months.

  • We have read Blue Earth, Inc.'s (f/k/a Genesis Fluid Solutions Holdings, Inc.) disclosures included in Item 4.01 "Changes in Registrant's Certifying Accountant" on Blue Earth, Inc.'s (f/k/a Genesis Fluid Solutions Holdings, Inc.) Form 8-K dated October 26, 2010 to be filed with the Securities and Exchange Commission and we agree with such statements as they pertain to Salberg &: Company, P.A. Very truly yours, /s/ SALBERG &: COMPANY, P.A.

  • Norman Fain, P.E. (Civil) #25969 and Fluid Solutions Inc., Firm #10283 Ms. Wyckoff moved and Mr. Jones seconded to accept signed Consent Agreement; motion carried unanimously.

  • The separate existence of Genesis Fluid Solutions Holdings, Inc., which is sometimes hereinafter referred to as the "terminating corporation", shall cease upon the effective date of the merger in accordance with the provisions of the Delaware General Corporation Law.


More Definitions of Fluid Solutions

Fluid Solutions means fluid storage, transfer, and/or treatment, and includes but is not limited to, the rental of Tanks, pumps, filtration, and any accessories, attachments, or other items delivered to Customer, as well as any ancillary services thereto. Fluid Solutions may include the design, installation, operation, ongoing maintenance, monitoring, and dismantling of the Fluid Solutions system (“Fluid Solutions Services’). Customer shall provide accurate measurements, specifications and any supporting documentation to assist in the Fluid Solutions Services as requested by Pro Dig Rentals. Unless otherwise agreed to by the parties, Customer shall (i) have adequate lifting equipment on site to load and unload during set up and break down; (ii) insert, remove and maintain sewer pipe plugs and suction screens as necessary; (iii) provide any and all containment and required matting; (iv) obtain any and all rights of way, permits, and easements as necessary; (v) provide adequate staging areas, water sources, and access thereto; (vi) provide necessary controls of erosion, odor and traffic, including site restoration, as necessary; (vii) provide fueling and/or adequate power, including cable and an electrician, as necessary; (viii) perform daily inspection and maintenance of the Equipment during the Rental Period; and (ix) provide access at all times to the Fluid Solutions system and a clean, unobstructed and safe area to perform the Fluid Solutions Services.

Related to Fluid Solutions

  • Step therapy means a program for Insureds who take Prescription Drugs for an ongoing medical condition, such as arthritis, asthma or high blood pressure, which ensures the Insured receives the most appropriate and cost-effective drug therapy for their condition. The Step Therapy program requires that before benefits are payable for a high cost Covered Drug that may have initially been prescribed, the Insured try a lower cost first-step Covered Drug. If the prescribing Physician has documented with SHL why the Insured’s condition cannot be stabilized with the first-step Covered Drug, SHL will review a request for Prior Authorization to move the Insured to a second-step drug, and so on, until it is determined by SHL that the prescribed Covered Drug is Medically Necessary and eligible for benefit payment.

  • Clinical peer means a physician or other health care professional who holds a non-restricted license in a state of the United States and in the same or similar specialty as typically manages the medical condition, procedure or treatment under review.

  • Sole source procurement means a procurement without competition pursuant to a determination under Subsection 63G-6a-802(1)(a) that there is only one source for the procurement item.

  • Biomethane means biogas that meets pipeline quality natural gas standards.

  • Clinical means having a significant relationship, whether real or potential, direct or indirect, to the actual rendering or outcome of dental care, the practice of dentistry, or the quality of dental care being rendered to a patient;

  • Microbusiness means a licensee that may act as a cannabis

  • Collaborative drug therapy management means participation by an authorized pharmacist and a physician in the management of drug therapy pursuant to a written community practice protocol or a written hospital practice protocol.

  • Brachytherapy source means a radioactive source or a manufacturer-assembled source train or a combination of these sources that is designed to deliver a therapeutic dose within a distance of a few centimeters.

  • API means the American Petroleum Institute.

  • Drug therapy management means the review of a drug therapy regimen of a patient by one or more pharmacists for the purpose of evaluating and rendering advice to one or more practitioners regarding adjustment of the regimen.

  • Orthotics means the science and practice of evaluating, measuring, designing, fabricating, assembling, fitting, adjusting, or servicing an orthosis under a prescription from a licensed physician for the correction or alleviation of neuromuscular or musculoskeletal dysfunction, disease, injury, or deformity;

  • Step therapy protocol means a protocol or program that establishes the specific

  • Autism spectrum disorders means any of the pervasive developmental disorders as defined by the Diagnostic and Statistical Manual of Mental Disorders, 4th edition, published by the American Psychiatric Association, including autistic disorder, Asperger's disorder and pervasive developmental disorder not otherwise specified.

  • Manufacturing means all activities related to the manufacture of a Compound, including planning, purchasing, manufacture, processing, compounding, storage, filling, packaging, waste disposal, labeling, leafleting, testing, quality assurance, sample retention, stability testing, release, dispatch and supply, as applicable.

  • Antipsychotic medications means that class of drugs

  • Manufacturing operation means a process in which materials are changed, converted, or transformed into a different state or form from which they previously existed and includes refining materials, assembling parts, and preparing raw materials and parts by mixing, measuring, blending, or otherwise committing such materials or parts to the manufacturing process. "Manufacturing operation" does not include packaging.

  • in vitro diagnostic medical device means any medical device which is a reagent, reagent product, calibrator, control material, kit, instrument, apparatus, equipment, software or system, whether used alone or in combination, intended by the manufacturer to be used in vitro for the examination of specimens, including blood and tissue donations, derived from the human body, solely or principally for the purpose of providing information:

  • Biological agent shall mean any pathogenic (disease producing) micro-organism(s) and/or biologically produced toxin(s) (including genetically modified organisms and chemically synthesized toxins) which cause illness and/or death in humans, animals or plants.

  • Intrascholastic Activities means athletic or non-athletic/academic activities where students compete with students from within the same school.

  • Bioassay means the determination of kinds, quantities or concentrations and, in some cases, the locations of radioactive material in the human body, whether by direct measurement, in vivo counting, or by analysis and evaluation of materials excreted or removed from the human body. For purposes of these rules, “radiobioassay” is an equivalent term.

  • Products means information resources technologies that are, or are related to, EIR.

  • Tissue means a portion of the human body other than an organ or an eye. The term does not include blood unless the blood is donated for the purpose of research or education.

  • Chemical agent shall mean any compound which, when suitably disseminated, produces incapacitating, damaging or lethal effects on people, animals, plants or material property.

  • Finished Products means any one or more of the following petroleum oils, or a mixture or combination of these oils, to be used without further processing except blending by mechanical means:

  • Processes “Processing,” “Processed” means any operation or set of operations which is performed on data or sets of data, whether or not by automated means, such as collection, recording, organization, structuring, storage, adaptation or alteration, retrieval, consultation, use, disclosure by transmission, dissemination, or otherwise making available, alignment or combination, restriction, erasure, or destruction.

  • Manufacturing Process means any process for—