Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.
maximum content of non-originating materials means the maximum content of non-originating materials which is permitted in order to consider a manufacture to be working or processing sufficient to confer originating status on the product. It may be expressed as a percentage of the ex-works price of the product or as a percentage of the net weight of these materials used falling under a specified group of chapters, chapter, heading or subheading;
Healing arts screening means the testing of human beings using x-ray machines for the detection or evaluation of health indications when such tests are not specifically and individually ordered by a licensed practitioner of the healing arts legally authorized to prescribe such x-ray tests for the purpose of diagnosis or treatment.
Brand Name or Equal Specification means a specification which uses one or more manufacturer’s names or catalogue numbers to describe the standard of quality, performance, and other characteristics needed to meet District requirements, and which provides for the submission of equivalent products.
Best available control technology (BACT means an emissions limitation (including a visible emission standard) based on the maximum degree of reduction for each pollutant subject to regulation under CAA which would be emitted from any proposed major stationary source or major modification which the Department, on a case-by-case basis, takes into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 7 DE Admin. Code 1120 and 1121. If the Department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard, or combination thereof, may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation, and shall provide for compliance by means which achieve equivalent results.
Class Licence Allowance Gross All-Purpose Wage A" Class Licence per week per hour 1 945.50 69.45 1,014.95 26.7092 2 989.15 69.45 1,058.60 27.8579 3 1,032.80 69.45 1,102.25 29.0066 4 1,076.45 69.45 1,145.90 30.1553 5 1,120.10 69.45 34.05 1,223.60 32.2000 50.60 1,274.20 33.5317 6 1,163.75 69.45 34.05 1,267.25 33.3487 50.60 1,317.85 34.6804 7 1,251.05 69.45 34.05 1,354.55 35.6461 50.60 1,405.15 36.9778 8 1,338.35 69.45 34.05 1,441.85 37.9434 50.60 1,492.45 39.2751 9 1,382.00 69.45 34.05 1,485.50 39.0921 50.60 1,536.10 40.4238 10 1,512.95 69.45 34.05 1,616.45 42.5382 50.60 1,667.05 43.8699
Area Agency on Aging (AAA means the Department of Human Services designated agency charged with the responsibility to provide a comprehensive and coordinated system of services to seniors and individuals with disabilities in a planning and service area. For the purpose of these rules, the term Area Agency on Aging is inclusive of both Type A and Type B Area Agencies on Aging as defined in ORS 410.040 and described in ORS 410.210 to 410.300.
DocuSign Envelope ID C6DC418D-7DF1-4A5E-A860-D737F80DFF6E
Off-highway implement of husbandry means the same as that term is defined in Section 41-22-2.
Verification on oath or affirmation means a declaration, made by an individual on oath or affirmation before a notarial officer, that a statement in a record is true.
Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.
Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;
Reasonably Available Control Technology (RACT) means the lowest emission limit that a particular source is capable of meeting by the application of control technology that is reasonably available considering technological and economic feasibility. It may require technology that has been applied to similar, but not necessarily identical source categories.
Best available control technology or “BACT” means an emissions limitation, including a visible emissions standard, based on the maximum degree of reduction for each regulated NSR pollutant which would be emitted from any proposed major stationary source or major modification which the reviewing authority, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combination techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 567—subrules 23.1(2) through 23.1(5) (standards for new stationary sources, federal standards for hazardous air pollutants, and federal emissions guidelines), or federal regulations as set forth in 40 CFR Parts 60, 61 and 63 but not yet adopted by the state. If the department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard or combination thereof may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation and shall provide for compliance by means which achieve equivalent results.
CLIENT OF BHEL or “CUSTOMER” shall mean the project authorities with whom BHEL has entered into a contract for provision of services.
Noncommercial computer software means software that does not qualify as commercial computer software under paragraph (a)(1) of this clause.
KIID means key investor information document;
Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.
Sxxxxxxx-Xxxxx Act means the Sxxxxxxx-Xxxxx Act of 2002, as amended.
Customer-Funded Upgrade means any Network Upgrade, Local Upgrade, or Merchant Network Upgrade for which cost responsibility (i) is imposed on an Interconnection Customer or an Eligible Customer pursuant to Tariff, Part VI, section 217, or (ii) is voluntarily undertaken by a New Service Customer in fulfillment of an Upgrade Request. No Network Upgrade, Local Upgrade or Merchant Network Upgrade or other transmission expansion or enhancement shall be a Customer-Funded Upgrade if and to the extent that the costs thereof are included in the rate base of a public utility on which a regulated return is earned.
Xxxx-Xxxxx Act means the Xxxx-Xxxxx Xxxx Street Reform and Consumer Protection Act.
Xxxxx–Xxxxx Act For any federally assisted construction contract, in excess of two thousand dollars ($2,000), the contractor, subcontractor, subrecipient shall comply with all of the requirements of the Xxxxx-Xxxxx Act (40 U.S.C. 3141 – 3148) as supplemented by Department of Labor Regulations (29 CFR Part 5, “Labor Standards Provisions Applicable to Contracts Covering Federally Financed and assisted Construction”); and the Xxxxxxxx “Anti-Kickback” Act (40 U.S.C. 3145), as supplemented by Department of Labor regulations (29 CFR Part 3, “Contractors and Subcontractors on Public Building or Public Work Financed in Whole or in Part by Loans or Grants from the United States”).
Mining Xxx 0000 means (unless the context otherwise requires) the Mining Xxx 0000 and the amendments thereto and the regulations made thereunder as in force on 31st December, 1981;
Contact adhesive means a non-aerosol adhesive that: (i) is designed for application to both surfaces to be bonded together, and (ii) is allowed to dry before the two surfaces are placed in contact with each other, and (iii) forms an immediate bond that is impossible, or difficult, to reposition after both adhesive- coated surfaces are placed in contact with each other, and (iv) does not need sustained pressure or clamping of surfaces after the adhesive-coated surfaces have been brought together using sufficient momentary pressure to establish full contact between both surfaces. “Contact Adhesive” does not include rubber cements that are primarily intended for use on paper substrates. “Contact Adhesive” also does not include vulcanizing fluids that are designed and labeled for tire repair only.
Place of public accommodation means any building or structure in which goods are supplied or services performed, or in which the trade of the general public is solicited.
Maximum design heat input means the ability of a unit to combust a stated maximum amount of fuel per hour on a steady state basis, as determined by the physical design and physical characteristics of the unit.