Examples of Guide tube in a sentence
Guide tube penetrations of the primary containment are sealed by brazing which meets the requirements of ASME Boiler and Pressure Vessel Code, Section VIII.
Guide tube with- inserted burnable- Central tubeabsorberLR-0 REACTORRelative power CENTREvaluesFA No. 13FA No. 3BAFFLEBAFFLEBAFFLE Figure 4: WWER-1000 mock-up Figure 5: Experimental power distribution values general view on reactor LR-0 in selected FP positions in FA No. 4 ([3]) The presented results demonstrate the depression given by the ratio of the power distribution mean values corresponding 2 opposite FP rows in FA No. 4 to- and outwards the baffle.
The fuel assembly was obtained from the UAM benchmark.The geometry of both assemblies are the same: UO2 pins Guide tube Inst.
In the other configuration the inflow occurs from the central Guide tube and flows back away from the window via the outer annulus; hence this condition is designated “Guide tube inflow”.Outer annulus inflowFigure 2-2.
These igniters are available in a variety of hardware configurations to fit the customer’s specific installation requirements and operating preferences: • Guide tube lengths are available from 14 to 180 inches in increments of 2 inches.
Geometry of UO2 and MOX AssembliesGuide tube UO2 3.7% Guide tube MOX 4.3%MOX 7.0% MOX 8.7% Vacuum Vacuum ReflectorReflectorReflector21.42 cmXReflector Vacuum Figure 2.14.
Guide tube" (Projection sheath) "Guide tube," commonly called a projection sheath, means a flexible or rigid tube (i.e., (i.e., "J" tube) for guiding the source assembly and the attached control cable from the exposure device to the exposure head.
These photographs depict a measurement just inside the optical window.LDA probe head y = 94.5 mmy z = 2.787 m z x(Pre-Spacer)z = 1.537 m(Mid-Bundle)z = 1.326 m(Post-Spacer)zDirection of 1-D automatic stage travelVelocity profiles along dashed line Optical window Guide tube Fuel pinPWR 17×17 assemblyFig.
UO2 rod MOX rod Guide tube Figure 2.1. Pin Loading Pattern of CORAIL Assembly Figure 2.2 presents a flow diagram for the TRU multi-recycling methodology utilized in the CORAIL concept.
Martensitic steel T91 is selected for the cylinder hull and the Guide tube.