Heat detector definition

Heat detector means a single or multiple station alarm responsive to heat.
Sample 1Sample 2Sample 3
Heat detector means a fire detector that detects either abnormally high temperature or rate-of-temperature rise, or both.
Sample 1Sample 2Sample 3

Examples of Heat detector in a sentence

  • Heat detector portion shall be fixed temperature sensor rated at 57 degrees C 135 degrees F.

  • Heat detector should have LED, which should flash periodically to indicate that the detector is in proper working mode and glow continuously if heat is detected.iii.

  • Check the control equipment to find which mode the Discovery Heat detector is set to.

  • For the Line Type Heat Detection System, a separate sounder shall be installed just above the Heat detector cable Sensing Control Panel.2.9 Portable Fire Protection System 2.9.1 GeneralPortable and mobile fire-fighting apparatus as specified shall be for the suppression of major and minor fires in all substation buildings and outside in the switchyards, and to meet the requirements of the Local Fire Authority.

  • Smoke detector, LPG detector, Heat detector, PA system, MCP, Hydrogen gas leak detectors, oxygen analyzer system, Central Communication systems are provided to tackle emergency situations.

  • Heat detector alarms (rate of rise / maximum temperature) must be installed in each space fitted with a fixed gas fire extinguishing system.o (1) Approve systems must comply with 46CFR161.00o (2) Other systems designed and approved IAW 46CFR27.203 are also acceptable 2Alternate Compliance and Safety Agreement (ACSA) for H G Trawl and Longline Vessels section G.5.6. Smoke detectors in all accomodation spaces• a.

  • In addition, documentation should be submitted in support of any portions of the action plan that the auditee considers completed.Schedule of Findings, Questioned Costs, And Recommendations Option 1: If the audit resulted in no findings, the schedule should still be included in the audit report package and should include only the following statement: Our audit disclosed no findings that are required to be reported herein under the HUD Consolidated Audit Guide.

  • In the rest of this paper we assume that the positron flux is of secondary origin, and proceed to deduce new constraints on CR propagation.+The secondary model allows us to quantify the amount by which the positron flux is suppressed by propagation energy loss, based on the observations.

  • Equipment: 1 ea., Simplex 4020 Fire Alarm Control Panel1 ea., Simplex 4603 LCD Enunciator 12 ea., Double action pull station12 ea., Single action pull station 6 ea., Smoke detector38 ea., Horn/Strobe 37 ea., Strobe2 ea., Heat detector 2 ea., Horn6 ea., Duct smoke detector 1 ea., Bell4 ea., 12 volt battery End of Section E Section F Automatic Sprinkler System System Assurance Services 1.

  • The detector shall be capable of being remotely tested from control panel.8. 09 HEAT DETECTOR (ADDRESSABLE TYPE): Heat detector shall be combined rate of rise and fixed temperature type.

Related to Heat detector

  • Radiation detector means a device which in the presence of radiation provides a signal or other indication suitable for use in measuring one or more quantities of incident radiation.

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.

  • heat pump means a machine, a device or installation that transfers heat from natural surroundings such as air, water or ground to buildings or industrial applications by reversing the natural flow of heat such that it flows from a lower to a higher temperature. For reversible heat pumps, it may also move heat from the building to the natural surroundings;

  • Heat input means the product (expressed in mmBtu/time) of the gross calorific value of the fuel (expressed in Btu/lb) and the fuel feed rate into the combustion device (expressed in mass of fuel/time) and does not include the heat derived from preheated combustion air, recirculated flue gases, or ex- haust from other sources.

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • Valve means a device used to control the flow of water in the irrigation system.

  • Hydraulic conductivity means the quantity of water that will flow through a unit cross-sectional area of a porous material per unit of time under a hydraulic gradient of 1.0;

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Interconnector means a transmission line which crosses or spans a border between Member States for the purpose of connecting the national transmission system of those Member States or a transmission line between a Member State and a third country up to the territory of the Member States or the territorial sea of that Member State;

  • Cabinet radiography means industrial radiography conducted in an enclosure or cabinet shielded so that radiation levels at every location on the exterior meet the limitations specified in 641—40.26(136C).

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Electrical Fitter means an employee who is mainly employed in the workshops manufacturing, fitting, and repairing electrical instruments, machines, and apparatus. Electrical fitting in this definition shall include armature and transformer winding, and people solely engaged in making and repairing instruments. The legitimate possession of a certificate of competency in this particular class of work issued by the Electrical Licensing Board under the Electricity Act 1994 shall be recognised as proof of efficiency.

  • Signal means any transmission of radio frequency energy or of optical information.

  • Reactor means a vat or vessel, which may be jacketed to permit temperature control, designed to contain chemical reactions.

  • Radiography means a technique for generating and recording an x-ray pattern for the purpose of providing the user with an image(s) after termination of the exposure.

  • Pitch means a Grass Pitch or Football Turf Pitch.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • Attenuation block means a block or stack, having dimensions 20 centimeters by 20 centimeters by 3.8 centimeters, of type 1100 aluminum alloy or other materials having equivalent attenuation.

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Interface means the mixture occurring in pipeline operations between adjoining batches having similar or dissimilar physical characteristics.

  • Network Area means the 50 mile radius around the local school campus the Named Insured is attending.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Bypass means the intentional diversion of waste streams from any portion of the treatment facility. "Summer" shall be considered to be the period from May 1 through October 31.