Heating Load definition

Heating Load. Compressor(s): ________ Wattx (Xxat Pump) Inside Fan: ________ Wattx Outside Fan(s): ________ Wattx (Xxat Pump) Heat Coil(s): ________ Wattx
Heating Load. Compressor(s): ______ Wattx (Xxat Pump) Inside Fan: ______ Wattx Outside Fan(s): ______ Wattx (Xxat Pump) Heat Coil(s): ______ Wattx
Heating Load. (Ph(Tj)) means the calculated heating need of a room or space for that specific outdoor temperature, expressed in kilowatt (kW);

Examples of Heating Load in a sentence

  • Ensure the chiller is not oversized and consult the Cooling and Heating Load Calculation Manual (http://www.ashrae.org).

  • Adjusted quantity of gas 110,000 Mcf Annual base load quantity 73,200 Mcf Heating Load 36,800 Mcf Step 6.

  • January February March April May June July August September October November December TOTAL Total Annual Heating Load BTU X 106 Annual Heating Fuel Consumption BTU X 106 Annual Heating Fuel Consumption (lbs.

  • Building thermal envelopes shall comply with the requirements of sections AA104.3.1.1 (Envelope Heating Load Limit) through AA104.3.1.3 (Envelope Airtightness).

  • Currently there are five approaches available for generating the radiant time factors: (1) software that comes with the book Cooling and Heating Load Calculation Principles (Pedersen et al.

  • Building LocationsModelsWater Heating Load (kWh)HVAC Load (kWh)Total Controllable Loads (kWh) PhoenixEnergyPlus2,0999,40411,503Gray-Box Models1,9509,93211,882Difference-7.10%5.61%3.29% ChicagoEnergyPlus3,67621,49425,170Gray-Box Models3,62321,42625,049Difference-1.44%-0.32%-0.48% We did not use EnergyPlus to implement MPC but instead used two weeks of EnergyPlus output data to train appropriate control models on a rolling basis.

  • The load calculations shall be in accordance with ASHRAE non•residential Cooling and Heating Load Calculations.

  • The term Applicant refers to the entity submitting the application to the program: Customer or Participating Contractor.Building Heating Load (BHL) Building Heating Load is the building heat loss in British Thermal Units per hour (Btu/h).

  • Use a Heating Load of 1,487 therms which represents the TRM boiler load of 1,218 therms divided by the TRM v8.0 default efficiency of a boiler system (81.9%).

  • Month Heating Degree Days Heating Load BTU X 106 (Therms) Fuel Consumption - lbs.

Related to Heating Load

  • Heating fuel means fossil-based heating fuel, including oil,

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Heating oil means petroleum that is No. 1, No. 2, No. 4-light, No. 4-heavy, No. 5-light, No. 5-heavy, and No. 6 technical grades of fuel oil; other residual fuel oils (including Navy Special Fuel Oil and Bunker C); and other fuels when used as substitutes for one of these fuel oils. Heating oil is typically used in the operation of heating equipment, boilers, or furnaces.

  • Sanitary Sewer System means all facilities, includ- ing approved LOSS, used in the collection, transmission, storage, treatment, or discharge of any waterborne waste, whether domestic in origin or a combination of domestic, commercial, or industrial wastewater. LOSS are only consid- ered sanitary sewer systems if they are designed to serve urban densities. Sanitary sewer system is also commonly known as public sewer system.

  • Electrical work Means any labor or material used in installing, altering, maintaining, or extending an electrical wiring system and the appurtenances, apparatus, or equipment used in connection with the use of electrical energy in, on, outside, or attached to a building, residence, structure, property, or premises. The term includes service entrance conductors as defined by the National Electrical Code.

  • Electricity means Active Energy and Reactive Energy.

  • Sanitary Sewer Overflow or “SSO” means an overflow, spill, diversion, or release of wastewater from or caused by Akron’s Sanitary Sewer System. This term shall include: 1) discharges to waters of the State or United States from Akron's Sanitary Sewer System; and 2) any release of wastewater from Akron's Sanitary Sewer System to public or private property that does not reach waters of the State or the United States, including Building/Property Backups.

  • Building system means plans, specifications and docu- mentation for a system of manufactured building or for a type or a system of building components, which may include structural, electrical, mechanical, plumbing and variations which are sub- mitted as part of the building system.

  • Building sewer means the extension from the building drain to the public sewer or other place of disposal.

  • Building Common Areas means with respect to the Tower, the areas, facilities and amenities specified in Schedule [E] which are to be used and enjoyed in common with all the other Apartment Acquirers of the Units in the Building; and

  • HVAC means heating, ventilation and air conditioning.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • HVAC System is defined in Section 6.10(a)(v).

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Building Contractor means the building contractor or developer appointed or to be appointed by the Grant Recipient in respect of a Firm Scheme; Business Day means any day other than a Saturday, Sunday or a statutory Bank Holiday in England;

  • Building Contract means a contract entered into between the Grant Recipient and a Building Contractor relating to the construction, repair, refurbishment, conversion, development and/or Rehabilitation (as applicable) of a Firm Scheme; Building Contractor means any building contractor or developer appointed or to be appointed by the Grant Recipient in respect of a Firm Scheme; Business Day means any day other than a Saturday, Sunday or a statutory Bank Holiday in England;

  • Electrical Fitter means an employee who is mainly employed in the workshops manufacturing, fitting, and repairing electrical instruments, machines, and apparatus. Electrical fitting in this definition shall include armature and transformer winding, and people solely engaged in making and repairing instruments. The legitimate possession of a certificate of competency in this particular class of work issued by the Electrical Licensing Board under the Electricity Act 1994 shall be recognised as proof of efficiency.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.

  • Sewer System means pipelines or conduits, pumping stations, force mains, vehicles, vessels, conveyances, injection wells, and all other constructions, devices, and appliances appurtenant thereto used for conducting sewage or industrial waste or other wastes to a point of ultimate disposal or disposal to any water of the state. To the extent that they are not subject to section 402 of the federal Water Pollution Control Act, ditches, pipes, and drains that serve only to collect, channel, direct, and convey nonpoint runoff from precipitation are not considered as sewer systems for the purposes of this part of this division.

  • drainage work means any watercourse and includes any land which is expected to provide flood storage capacity for any watercourse and any bank, wall, embankment or other structure, or any appliance, constructed or used for land drainage or flood defence;

  • Roof means a non-porous cover for a structure such as (by way of example and not limitation) Lexan barriers or shingles but not a shade trellis, ivy or other open or porous material that may also be used as a cover.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.