Heating surface definition

Heating surface means the heating surface determined by the boiler manufacturer and recorded in the manufacturer's data report or by rules established by the board for a boiler if the manufacturer's data report is not available or the boiler is not stamped with its heating surface.
Sample 1Sample 2Sample 3
Heating surface means, in respect of any steam boiler, the total surface of all plates and tubes exposed to heat on one side and in contact with water on the other, measured on the water or fire side, whichever is the greater, and excluding the heating surface of any economiser and super heater connected thereto;
Sample 1Sample 2
Heating surface means any part of the surface of a boiler that is in contact with liquid under pressure on one side and the products of combustion on the other side; « surface de chauffe »
Sample 1Sample 2Sample 3

Examples of Heating surface in a sentence

  • Heating surface: “50” designates 5.0 sq ft heating surface per boiler horsepower.

  • Heating surface of 20 square feet, except for electric boil- ers.

  • Heating surface shall be fully accessible for inspection and cleaning without disturbing the burner equipment.

  • Heating Surface: Heating surface is defined as the fireside area of the furnace and combustion chamber plus inside (gas side) circumferential area of all convection tubes.

  • The CEO confirmed at the time details had been provided to Councillors the number was at 18, however the numbers had been growing.

  • Evaporation : 7750 lbs/hr Working pressure : 100 psi Heating surface : 1894 sqft.

  • Heating surface components At the present moment surface heated gearboxes and gearboxes with immersed heaters with constant oil circulation, generator heaters and also heaters for the cabins containing control electronics are used to avoid cold related problems.

  • A lot of rework in sorting bugs rather than actually triaging it and moving it along” (P9).

  • Heating surface block, muffler blocks of all stages and chimney sections are made as modules as high factory readiness with installed inner thermal insulation and casing.

  • Heating surface with fins To measure the average temperature of the test plate two PT – 100 temperature sensors with a diameter of 1 mm are embedded inside the copper block through its bottom surface.


More Definitions of Heating surface

Heating surface means the manufacturers designed heating surface of a boiler, or in the absence thereof, the area of all surfaces of a boiler to which heat is applied for the purpose of raising the temperature of water or steam;
Sample 1Sample 2
Heating surface means the heating surface determined by
Sample 1
Heating surface means any part of the pressure boundary of a boiler that is in contact with a fluid under pressure on one side and the source of heat on the other side as calculated on the surface having the greater radii if the surface is curved.
Sample 1
Heating surface means any part of the surface of a boiler or thermal liquid heating system that is in contact with fluid under pressure on one side and the products of combustion on the other side;
Sample 1
Heating surface means the surface area of a boiler or pressure vessel that transfers heat, as determined under section 46;
Sample 1

Related to Heating surface

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Building means any structure used or intended for supporting or sheltering any use or occupancy.

  • Impervious surface means a surface that has been covered with a layer of material so that it is highly resistant to infiltration by water.

  • Common Areas is defined as all areas and facilities outside the Premises and within the exterior boundary line of the Project and interior utility raceways and installations within the Unit that are provided and designated by the Lessor from time to time for the general non-exclusive use of Lessor, Lessee and other tenants of the Project and their respective employees, suppliers, shippers, customers, contractors and invitees, including parking areas, loading and unloading areas, trash areas, roadways, walkways, driveways and landscaped areas.

  • Common Area means all areas and facilities within the Project that are not designated by Landlord for the exclusive use of Tenant or any other lessee or other occupant of the Project, including the parking areas, access and perimeter roads, pedestrian sidewalks, landscaped areas, trash enclosures, recreation areas and the like.

  • Building Drain means that part of the lowest horizontal piping of a drainage system which receives the discharge from soil, waste, and other drainage pipes inside the walls of the building and conveys it to the building sewer, beginning five (5) feet (1.5 meters) outside the inner face of the building wall.

  • Sanitary Sewage means wastewaters from residential, commercial and industrial sources introduced by direct connection to the sewerage collection system tributary to the treatment works including non-excessive inflow/infiltration sources.