High viscosity definition

High viscosity means a pollutant with a viscosity of 30 centistokes (cSt) and higher at 40 degrees Centigrade.
Sample 1Sample 2Sample 3
High viscosity means, in respect of a category X or category Y substance, a
Sample 1
High viscosity means a pollutant with a viscosity of 30 centistokes (cSt) and higher at 40 degrees Centigrade, such as American Society for Testing and Materials (ASTM) grades 5 and 6 residual oils, intermediate fuel oils, or Bunker C fuel.
Sample 1

Examples of High viscosity in a sentence

  • This pre-engagement work should be considered in programme monitoring.

  • High viscosity may result in seizure of the pump.Perkins recommends kinematic viscosities of 1.4 and4.5 cSt that is delivered to the fuel injection pump.

  • High viscosity index number indicates relatively a small change in viscosity with temperature.

  • High viscosity ink, or oil based ink, is used which adheres to the raised portion of the plate without filling in the non-printing portions of the plate.

  • C, D: High viscosity contrast (experiments with λ =10.3 and simulation with λ =10).

  • High viscosity was also observed in T1 with P3, and in T4 with P3 and C.

  • Voice identity representations might also be encoded in relation to a voice “prototype” which represents the average (or “norm”) of all voices encountered by the listener (Belin et al., 2011; Latinus & Belin, 2011).

  • Continued advances in pump technology and hydraulic system design offered refinement in mechanical recovery technology, including: High viscosity belt skimmersViscous oil pumping technology Remote control skimmersHigh capacity skimmers Other developments included:Sorbents – Considerable research has been accomplished on sorbents over the past two- decades.

  • Specific areas in which Research and Development are carried out by the Company are:Development of Complex Ophthalmic Formulations like Nanosuspensions, Ophthalmic Gels, High viscosity combination products are in progress.

  • High viscosity affects the volume flow and injection spray characteristics in the engine, and at low temperatures may compromise the mechanical integrity of injection pump drive systems (when used as stand alone B100 diesel fuel).Limits and methods:Brazil Limit: Report Method: ABNT NBR 10441/ EN ISO 3104/ ASTM D445 EU Limit: 3.5-5.0 mm2/s Method: EN ISO 3104USA Limit: 1.9-6.0 mm2/s Method: ASTM D445Commentary:Brazil cat.

Related to High viscosity

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS that operates on a high voltage.

  • Hydraulic lift tank means a tank holding hydraulic fluid for a closed-loop mechanical system that uses compressed air or hydraulic fluid to operate lifts, elevators, and other similar devices.

  • Density means the permitted number of dwelling units per

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • Total tetrahydrocannabinol means the sum of the percentage by weight of tetrahydrocannabinolic acid multiplied by eight hundred seventy-seven thousandths plus the percentage of weight of tetrahydrocannabinol.

  • Tetrahydrocannabinol means a substance derived from cannabis or a synthetic equivalent as described in Subsection 58-37-4(2)(a)(iii)(AA).

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Energy Use Intensity (EUI means the kBTUs (1,000 British Thermal Units) used per square foot of gross floor area.

  • X-ray high-voltage generator means a device which transforms electrical energy from the potential supplied by the x-ray control to the tube operating potential. The device may also include means for transforming alternating current to direct current, filament transformers for the x-ray tube(s), high-voltage switches, electrical protective devices, and other appropriate elements.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.

  • Enhanced coagulation means the addition of sufficient coagulant for improved removal of disinfection byproduct precursors by conventional filtration treatment.

  • Cannabis concentrate means cannabis that has undergone a process to concentrate one or more active cannabinoids, thereby increasing the product’s potency. Resin from granular trichomes from a cannabis plant is a concentrate for purposes of this division. A cannabis concentrate is not considered food, as defined by Section 109935 of the Health and Safety Code, or a drug, as defined by Section 109925 of the Health and Safety Code.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.