Hydraulic pressure definition

Hydraulic pressure means the net pressure supplied by the brake to generate clamping force between the brake and friction material. The hydraulic pressure, combined with the brake's friction coefficient and the effective brake radius, induces the actual brake torque output.
View Source

Examples of Hydraulic pressure in a sentence

  • Hydraulic pressure component in the wheel hub can control the blade tip, which can be overhauled through the manhole on the wheel axle.

  • Hydraulic pressure opens the control valve against a spring force; compressed spring force closes the valve upon loss of hydraulic pressure.

  • In house facility for regular testing & certification of cylinder for tare weight, Hydraulic pressure tests etc.

  • Hydraulic pressure transients occur in pipelines when the steady-state conditions of the system change due to pressure or flow disturbances (e.g. the rapid closure of a valve, pump start- up/shutdown, etc.).

  • Refilling should be done when cylinder weight is reduced by 10% or more than 10% from gross weight of Cylinder or after Hydraulic pressure Test (HPT).

  • Hydraulic pressure: Hydraulic components shall be factory tested for 600 PSI.

  • Hydraulic pressure gauges are mounted on the mast base to provide system monitoring during the raising/lowering process.

  • Hydraulic Pressure Unit shall be subjected to test specified in IEC publication 308 for which Contract shall submit all test reports and certificates before FAT Witness test and Hydraulic pressure Unit shall be complete tested and ready to connect with the required oil and water pipes at project site without any problem.

  • Type 1 - Heavy Construction/Logging Equipment (dozer, grader, excavator) Hydraulic pressure Testing kit Charging/Starting System Analyzer Code Reader Arc welder - min.

  • Hydraulic pressure test, including end covers, of at least 1.5 times maximum working pressure for 30 minutes, witnessed by Eskom and an independent inspection authority appointed by Eskom.

Related to Hydraulic pressure

  • Pressure means the total load or force per unit area acting on a surface.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Hydraulic lift tank means a tank holding hydraulic fluid for a closed-loop mechanical system that uses compressed air or hydraulic fluid to operate lifts, elevators, and other similar devices.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.