Loading Profile definition

Loading Profile. - means the specifications and procedures set out or to be set out in a Schedule setting out the manner and the parameters within which the Goods must be loaded and off-loaded and includes the loaded profile of the Goods;
Loading Profile means the specifications and procedures set out in clause 14 of this Agreement , setting out the manner and the parameters within which the Goods must be loaded and off-loaded and includes the loaded profile of the Goods;

Examples of Loading Profile in a sentence

  • If the Loading Profile is exceeded at the sender Gateway and/or the Network Hub, the Network Service Provider shall use all reasonable endeavours to transfer Messages in the Transfer Time plus the equivalent number of Time Periods required until the cumulative volumes and numbers of Messages again meet the Loading Profile for both the sender Gateway and the Network Hub in accordance with the previous paragraph.

  • This process will continue until the load on the sender Gateway and the load on the Network Hub are both within the relevant Loading Profile.

  • For each Gateway measurements will be made of the Transfer Times for the Messages across the MDNS and the Service Levels will be that in 99% of cases such Messages must, subject to the relevant Loading Profile, be successfully transferred from sender Gateway to recipient Gateway in a Transfer Time of 2 hours.

  • The above Service Levels and associated requirements for Transfer Times shall only apply if the sender Gateway and the Network Hub are both operating within their Loading Profile in the Time Period in which the Message is Sent.

  • Where the Loading Profile is exceeded then the excess load will be carried forward and added into the load for the next Time Period to determine whether that Time Period is valid for service level calculations.

  • Across all Gateways, measurements will be made of the Transfer Times for the Messages across the MDNS and the Service Levels will be that in 90% of cases such Messages must be, subject to the relevant Loading Profile, successfully transferred from sender Gateway to recipient Gateway in 300 seconds.

  • Any Messages which fall outside of the Loading Profile shall not be included in the measurement and reporting of the Service Level.

  • The motor’s axis of rotation is assumed to be in the vertical or z direction.Table 4 Assumed Loading Profile for Aircraft Flight Loads The loading profile in Table 4 is a simple two state approximation of the possible loading a vehicle of this type might see in operation.

  • DRAFTException reports are generated by the Data Loading, Profile Production and SSR subsystems and the Restore Data process if warnings and errors are encountered.

  • Stress Loading Profile of Solder Joint [9]The total strain in the solder joint is given by following equation: εtot = εp + εc + εe(1) where, the symbol ε represents strain and subscripts p, c and e represent plastic, creep and elastic strains respectively.

Related to Loading Profile

  • DRS/Profile means the system for the uncertificated registration of ownership of securities pursuant to which ownership of ADSs is maintained on the books of the Depositary without the issuance of a physical certificate and transfer instructions may be given to allow for the automated transfer of ownership between the books of DTC and the Depositary. Ownership of ADSs held in DRS/Profile is evidenced by periodic statements issued by the Depositary to the Holders entitled thereto.

  • DNA profile means a letter or number code which represents a set of identification characteristics of the non-coding part of an analysed human DNA sample, i.e. the particular molecular structure at the various DNA locations (loci);

  • Disinfection profile means a summary of daily Giardia lamblia inactivation through the treatment plant. The procedure for developing a disinfection profile is contained in s. NR 810.34.

  • Donor profile record means all records about donors or potential donors to a public institution of higher education except the names and reported addresses of the actual donors and the date, amount, and conditions of the actual donation.

  • Dose profile means the dose as a function of position along a line.

  • Filter profile means a graphical representation of individual filter performance, based on continuous turbidity measurements or total particle counts versus time for an entire filter run, from startup to backwash inclusively, that includes an assessment of filter performance while another filter is being backwashed.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Utilization review plan or "plan" means a written procedure for performing review.

  • Supplier Profit Margin means, in relation to a period, the Supplier Profit for the relevant period divided by the total Charges over the same period in respect of any Call Off Agreements and expressed as a percentage;

  • input service means any service used or intended to be used by a supplier in the course or furtherance of business;

  • Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.

  • Performance Monitoring System has the meaning given to it in paragraph 1.1.2 in Part B of Schedule 6 (Service Levels, Service Credits and Performance Monitoring);

  • Deactivation Avoidable Cost Credit means the credit paid to Generation Owners pursuant to Tariff, Part V, section 114.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Baseline means the “Initial Small Business Lending Baseline” set forth on the Initial Supplemental Report (as defined in the Definitive Agreement), subject to adjustment pursuant to Section 3(a).

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Testing service means a national testing service selected by the board.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Maximum Concentration Level Assessment means the Maximum Concentration Level Assessment for the purposes of a Basic Comprehensive Certificate of Approval, described in the Basic Comprehensive User Guide, prepared by a Toxicologist using currently available toxicological information, that demonstrates that the concentration at any Point of Impingement for a Compound of Concern that does not have a Ministry Point of Impingement Limit is not likely to cause an adverse effect as defined by the EPA. The concentration at Point of Impingement for a Compound of Concern must be calculated in accordance with O. Reg. 419/05.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • aerodrome control service means air traffic control service for aerodrome traffic;

  • Screening means the evaluation process used to identify an individual's ability to perform activities of daily living and address health and safety concerns.