Lot Acceptance definition

Lot Acceptance. All lots shall be capable of passing a sampling inspection of *** AQL (Acceptable Quality Level); C=O (Rejected lots at supplier shall be re-inspected ***). *** .
Sample 1Sample 2Sample 3
Lot Acceptance by ADI shall be defined as the successful fabrication of 4 production lots including 1 prototype or skew lot and 3 qualification lots, which pass all relevant CSM WAT criteria.
Sample 1

Examples of Lot Acceptance in a sentence

  • QC373.2 – Radiation Lot Acceptance Testing – Enhanced Low Dose Rate Sensitivity (for L3ETI):Parts supplied to this requirement shall be subjected to Low Dose radiation testing per L3-ETI drawing B850913.

  • QC373 – Radiation Lot Acceptance Testing QC373.1 – Radiation Lot Acceptance Testing – Total Ionizing Dose (for L3ETI):Parts supplied to this requirement shall be subjected to Total Dose radiation testing per L3-ETI drawing B850912.

  • Copies of SEM photographs shall be supplied with the Wafer Lot Acceptance Report as part of a Space Data Pack when specified as a customer purchase order line item.

  • Whenever the contract requires contractor performance of ballistic testing, the results of such testing shall be captured by you, the performing contractor, within a specially designed Lot Acceptance Test Report (LATR) module.

  • Directors, Executive Officers and Corporate Governance 172 Item 13.

  • Wafer Lot Acceptance: Wafer lot acceptance shall be in accordance with MIL-PRF-38535, Appendix A, except for the following: Topside glassivation thickness shall be a minimum of 4KÅ.

  • Seventy (70) TOW 2A, Radio Frequency (RF) Missiles, BGM–71E–4B–RF (Fly-to-Buy Lot Acceptance Missiles).

  • Sampling rate is specified in 4.3 for LAT unless otherwise specified in the contract and Lot Acceptance Table.2/ Certification of Conformance (CoC) provided for LAT shall certify that the design and materials have not changed since approval of FAT and shall be complete with test data / results.

  • Egypt—TOW 2A Radio Frequency (RF) Missiles and Support The Government of Egypt has requested to buy five thousand (5,000) TOW 2A, Radio Fre- quency (RF) missiles, BGM–71E–4B–RF; and seventy (70) TOW 2A, Radio Frequency (RF) missiles, BGM–71E–4B–RF (Fly-to-Buy Lot Acceptance missiles).

  • For First Article Testing (FAT) and Lot Acceptance Testing (LAT), three (3) Partial Penetration (PP’s) and three (3) Complete Penetrations (CP’s) within a 125 ft/sec velocity spread or five (5) Partial Penetration (PP’s) and five (5) Complete Penetrations (CP’s) within a 150 ft/sec velocity spread yield the V50 BL determination that will be accepted.

Related to Lot Acceptance

  • Conditional Acceptance means a conditional acceptance by the Liquidity Provider of an extension of the Scheduled Termination Date.

  • Letter of Acceptance means the letter of formal acceptance, signed by the contractor. Procuring Entity, including any annexed memoranda comprising agreements between and signed by both Parties.

  • Date of Acceptance means the date, which appears on the Notice of Acceptance and if no date appears is the date on which the Principal sent the Notice of Acceptance accepting the Contractor’s Tender.

  • Operational Acceptance means the acceptance by the Procuring Entity of the Facilities (or any part of the Facilities where the Contract provides for acceptance of the Facilities in parts), which certifies the Contractor's fulfillment of the Contract in respect of Functional Guarantees of the Facilities (or the relevant part thereof) in accordance with the provisions of GCC Clause 28 (Functional Guarantees) hereof and shall include deemed acceptance in accordance with GCC Clause 25 (Commissioning and Operational Acceptance) hereof.

  • Notice of Acceptance means the written notification and any accompanying documentation sent to the Consultant by the Principal advising acceptance of its Tender to provide the Services under the Contract.

  • Acceptance Letter means the letter from Adviser to BD pursuant to which the Adviser appoints BD as a Broker Dealer for each series of MuniPreferred issued by any Fund that has executed a Request Letter.

  • Final Acceptance means final written acceptance of all the Work by the Commissioner, a copy of which shall be sent to the Contractor.

  • Confirmation of Acceptance shall have the meaning specified in paragraph 2B(5).

  • Certificate of Acceptance means written certification, delivered to Contractor and signed by an authorized representative of the State, stating that any Defects in a particular Phase or the Solution discovered after implementation and testing have been corrected as required under this Contract, and that the Phase complies in all material respects with all of the applicable Requirements.

  • Form of Acceptance means the Form of formal acceptance, signed by the Procuring Entity, of the Form of Tender, including any annexed memoranda comprising agreements between and signed by both Parties. If there is no such Form of acceptance, the expression “Form of Acceptance” means the Contract Agreement and the date of issuing or receiving the Form of Acceptance means the date of signing the Contract Agreement.

  • Assignment and Acceptance Agreement means an assignment and acceptance agreement entered into by a Lender, an Eligible Assignee and the Administrative Agent, and, if required, the Borrower, pursuant to which such Eligible Assignee may become a party to this Agreement, in substantially the form of Exhibit C hereto.

  • Commitment and Acceptance is defined in Section 2.18(b).

  • Final Acceptance Date means, in respect of any Offer, the final date for acceptance of such Offer which, if such Offer is extended prior to becoming unconditional, shall be the final date for acceptance of the extended Offer (but, if such Offer is or becomes unconditional, disregarding any additional or further period during which such Offer is open for acceptance);

  • Permitted Loan Purchase Assignment and Acceptance means an assignment and acceptance entered into by a Lender as an Assignor and Holdings, the Borrower or any of the Subsidiaries as an Assignee, as accepted by the Administrative Agent (if required by Section 9.04) in the form of Exhibit F or such other form as shall be approved by the Administrative Agent and the Borrower (such approval not to be unreasonably withheld or delayed).

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Competitive Bid Accept/Reject Letter means a notification made by the Borrower pursuant to Section 2.03(d) in the form of Exhibit D-4.

  • AGREED AND ACCEPTED BUYER: , a By: Name: Title:

  • Acceptance Date has the meaning set forth in Section 2.05(a)(v)(D)(2).

  • Assignment and Acceptance means an assignment and acceptance entered into by a Lender and an assignee (with the consent of any party whose consent is required by Section 9.04), and accepted by the Administrative Agent, in the form of Exhibit A or any other form approved by the Administrative Agent.