Measured XXXX XX Efficiency definition

Measured XXXX XX Efficiency shall have the meaning set forth in Exhibit G-2. “Measured Availability” shall have the meaning set forth in Exhibit G-1. “MISO” means the Midcontinent Independent System Operator, Inc.
Sample 1Sample 2Sample 3
Measured XXXX XX Efficiency shall have the meaning set forth in Exhibit G-2. “Measured PerformanceAvailability” shall meanhave the Effective Availability as definedmeaning set forth in Exhibit G-1.
Sample 1

Examples of Measured XXXX XX Efficiency in a sentence

  • If the Measured XXXX XX Efficiency is equal to or greater than the Guaranteed XXXX XX Efficiency for any annual reporting period (or, if shorter, the initial reporting period), then the Guaranteed XXXX XX Efficiency shall be deemed satisfied for such period and O&M Contractor shall have no liability to Owner in relation to the Guaranteed XXXX XX Efficiency.

  • If the Measured XXXX XX Efficiency is less than the Guaranteed XXXX XX Efficiency for any annual reporting period (or, if shorter, the initial reporting period), O&M Contractor shall pay Owner, as liquidated damages and not as a penalty, the amount indicated in Exhibit G- 2 (the “XXXX XX Efficiency Liquidated Damages”).

  • Any disputes related to the monthly reports provided under Section 4.10(a) of the Agreement, the calculation of Measured XXXX XX Efficiency or XXXX XX Efficiency Liquidated Damages shall be resolved as specified in the Agreement.

  • The calculation of Measured XXXX XX Efficiency and XXXX XX Efficiency Liquidated Damages for an Operating Period will be provided by O&M Contractor to Owner within fifteen (15) days after the end of such Operating Period.

  • For each Operating Period during the Term, O&M Contractor guarantees that Measured XXXX XX Efficiency (as defined below) for such Operating Period will equal or exceed the Guaranteed XXXX XX Efficiency (as defined in the table below).

  • If Measured XXXX XX Efficiency for an Operating Period is less than Guaranteed XXXX XX Efficiency, then the O&M Contractor will be subject to liquidated damages (“XXXX XX Efficiency Liquidated Damages”).

  • Measured XXXX XX Efficiency shall be measured annually for each Operating Period occurring during the Term.

Related to Measured XXXX XX Efficiency

  • Thermal efficiency means the useful electric energy output of a

  • Capture efficiency means the weight per unit time of VOC entering a capture system and delivered to a control device divided by the weight per unit time of total VOC generated by a source of VOC, expressed as a percentage.

  • Efficiency means the gas turbine manufacturer's rated heat rate at peak load in terms of heat input per unit of power output based on the lower heating value of the fuel.

  • Transfer efficiency means the percentage of total coating solids employed by a coating applicator which adheres to the object being coated.

  • Turbidity means the cloudy condition of water due to the presence of extremely fine particulate materials in suspension that interfere with the passage of light.

  • Operating Margin means the incremental adjustments, measured in megawatts, required in PJM Region operations in order to accommodate, on a first contingency basis, an operating contingency in the PJM Region resulting from operations in an interconnected Control Area. Such adjustments may result in constraints causing Transmission Congestion Charges, or may result in Ancillary Services charges pursuant to the PJM Tariff.

  • Adjusted Total turnover means the turnover in a State or a Union territory, as defined under sub-section (112) of section 2, excluding the value of exempt supplies other than zero-rated supplies, during the relevant period;

  • Irrigation efficiency (IE) means the measurement of the amount of water beneficially used divided by the amount of water applied. Irrigation efficiency is derived from measurements and estimates of irrigation system characteristics and management practices. The irrigation efficiency for purposes of this ordinance are 0.75 for overhead spray devices and 0.81 for drip systems.

  • Metric means a) when referenced in the context of a Named User, the individual Named User category and type (and corresponding Named User definition setting for such Named User’s use rights) as further described in Section 2.1 hereof -and- b) when referenced in the context of a Package, the individual business metric corresponding with each Package as further described in Section 2.2 hereof;

  • Transmission Reliability Margin or “TRM” shall mean the amount of transmission transfer capability necessary to provide reasonable assurance that the interconnected transmission network will be secure. TRM accounts for the inherent uncertainty in system conditions and the need for operating flexibility to ensure reliable system operation as system conditions change.

  • Energy efficiency means the ratio of output of performance, service, goods or energy, to input of energy;

  • Energy efficiency improvement means equipment, devices, or materials intended to decrease energy consumption, including, but not limited to, all of the following:

  • Affordability average means the average percentage of median income at which restricted units in an affordable housing development are affordable to low- and moderate-income households.

  • Operating Profit means the excess of Gross Revenues over the following deductions (“Deductions”) incurred by Manager, on behalf of Owner, in operating the Hotel:

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Supplier Profit Margin means, in relation to a period, the Supplier Profit for the relevant period divided by the total Charges over the same period in respect of any Call Off Agreements and expressed as a percentage;

  • CAGR means compound annual growth rate;

  • Step Up Margin means the rate per annum specified in the applicable Final Terms; and

  • Baseline means the “Initial Small Business Lending Baseline” set forth on the Initial Supplemental Report (as defined in the Definitive Agreement), subject to adjustment pursuant to Section 3(a).

  • Net weight means the weight of a commodity excluding any materials, substances, or items not considered to be part of the commodity. Materials, substances, or items not considered to be part of the commodity include containers, conveyances, bags, wrappers, packaging materials, labels, individual piece coverings, decorative accompaniments, prizes, coupons, and, in the case of edible commodities, anything that is nonedible.

  • Gross weight means the aggregate weight of a vehicle or combination of vehicles and the load

  • Maintenance Margin means the minimum amount of money required in your Trading Account as specified on the Trading Platform in order to keep a Transaction open on the Trading Platform.

  • Total Evaluated CRIS MW means the Additional CRIS MW requested plus either (i) if the Installed Capacity Supplier previously received an exemption under Sections 23.4.5.7.2(b), 23.4.5.7.6(b), 23.4.5.7.7 or 23.4.5.7.8, all prior Additional CRIS MW since the facility was last exempted under Sections 23.4.5.7.2(b), 23.4.5.7.6(b), or 23.4.5.7.8, or (ii) for all other Installed Capacity Suppliers, all MW of Capacity for which an Examined Facility obtained CRIS pursuant to the provisions in ISO OATT Sections 25, 30, or 32 (OATT Attachments S, X, or Z). For purposes of Section 23.4.5 of this Attachment H, “UCAP Offer Reference Level” shall mean a dollar value equal to the projected clearing price for each ICAP Spot Market Auction determined by the ISO on the basis of the applicable ICAP Demand Curve and the total quantity of Unforced Capacity from all Installed Capacity Suppliers in a Mitigated Capacity Zone for the period covered by the applicable ICAP Spot Market Auction. For purposes of Section 23.4.5 of this Attachment H, “Unit Net CONE” shall mean localized levelized embedded costs of a specified Installed Capacity Supplier, including interconnection costs, and for an Installed Capacity Supplier located outside a Mitigated Capacity Zone including embedded costs of transmission service, in either case net of likely projected annual Energy and Ancillary Services revenues, and revenues associated with other energy products (such as energy services and renewable energy credits, as determined by the ISO, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate. The Unit Net CONE of an Installed Capacity Supplier that has functions beyond the generation or transmission of power shall include only the embedded costs allocated to the production and transmission of power, and shall not net the revenues from functions other than the generation or transmission of power.

  • Annual Turnover means the actual turnover achieved during your first year of operations, from the commencement of your business to the date of the damage, converted to a 12-month equivalent figure.

  • Adjusted Net Operating Income means, with respect to a Property for any given period, Net Operating Income of such Property for such period minus Capital Reserves for such period.

  • Retail margin means an amount, reflecting differences in