Measurement Code definition

Measurement Code means the edition of the RICS Property Measurement published on behalf of RICS which is current at the date of this Agreement.
Sample 1Sample 2Sample 3

Examples of Measurement Code in a sentence

  • For transactions involving both material and services, indicate the total number of units (material only) shipped.Must Use G0502 355 Unit or Basis for Measurement Code X ID 2/2Code specifying the units in which a value is being expressed, or manner in which a measurement has been takenUse any code, the following is a preferred list: EA EachUse with G0501 when identifying material shipment quantities.

  • Must Use SLN05 C001 Composite Unit of Measure XTo identify a composite unit of measure (See Figures Appendix for examples of use)M C00101 355 Unit or Basis for Measurement Code M ID 2/2Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken1.

  • It also analysed the BIACT complaint based on the OECD Competi- tion Assessment Toolkit.

  • The Measurement Code Table (Reference Table 15) contains all the flags and their meanings for the MEASUREMENT_CODE variable.

  • Express as a whole number with no decimal.PO103 355 Unit or Basis for Measurement Code O ID 2/2Code specifying the units in which a value is being expressed, or manner in which a measurement has been takenUse to identify the unit of issue for the material requisitioned.

  • No decimal are allowed.MEA04 355 Unit or Basis for Measurement Code M ID 2/2 MCode identifying the basic unit of measurement.Unit of Measure for MEA03.

  • Each InvoiceDetailItem must have a distinct invoiceLineNumber.• (2) quantity: 2/010: IT102 (0358) "Quantity Invoiced"• (3) UnitOfMeasure: 2/010: IT103 (0355) "Unit or Basis for Measurement Code".

  • All Primary and Secondary Measurement Code (MC) events (see Annex F) that are experienced by the float are required to be present in the N_MEASUREMENT array and redundantly in the N_CYCLE variables.

  • Must Use CRT02 C001 Composite Unit of Measure OTo identify a composite unit of measure (See Figures Appendix for examples of use)Must Use C00101 355 Unit or Basis for Measurement Code M ID 2/2Code specifying the units in which a value is being expressed, or manner in which a measurement has been takenThis code is required for all the report forms to indicate if monetary amounts have been factored (for example, numbers represent dollars in thousands).

  • If the total quantity ordered is accepted, cite the quantity that was shown in the 850 transaction set.PO103 355 Unit or Basis for Measurement Code O ID 2/2Code specifying the units in which a value is being expressed, or manner in which a measurement has been takenUse to identify the unit of measure applicable to the quantity cited in PO102.

Related to Measurement Code

  • Measurement means metered volumes at a custody transfer meter through a turbine, Coriolis, or such other meter.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Procurement Code means §13-1-101, et seq., XXXX 0000, as amended and supplemented from time to time.

  • COVID-19 Measures means any quarantine, “shelter in place,” “stay at home,” workforce reduction, social distancing, shut down, closure, sequester or any other Law, directive, guidelines or recommendations by any Governmental Authority (including the Centers for Disease Control and the World Health Organization) in each case in connection with, related to or in response to COVID-19, including the Coronavirus Aid, Relief, and Economic Security Act (CARES) or any changes thereto.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Earned value management system means an earned value management system that complies with the earned value management system guidelines in the ANSI/EIA-748.

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Performance Monitoring System has the meaning given to it in paragraph 1.1.2 in Part B of Schedule 6 (Service Levels, Service Credits and Performance Monitoring);

  • Three-dimensional reference system means a system as described in Appendix 2 to this annex;

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;

  • Operating parameter value means a minimum or maximum value established for a control device or process parameter that, if achieved by itself or in combination with one (1) or more other operating parameter values, determines that an owner or operator has complied with an applicable emission limit.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • total system means the transmission system and the distribution system of the Board taken together;

  • Baseline data means information gathered at a selected point in time and used thereafter as a basis from which to monitor change.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this chapter, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, oxygen or carbon dioxide concentrations), and to record average operational parameter value on a continuous basis.

  • Measurement Time means 12:01 a.m. Eastern Time on the Closing Date.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.

  • Electronic Subcontracting Reporting System (eSRS) means the Governmentwide, electronic, web-based system for small business subcontracting program reporting. The eSRS is located at http://www.esrs.gov.

  • Outputs means the goods or services that are produced by an entity or other person;